The production methods and steps of the fish tank, and what are the production methods of the fish t

To make a simple fish tank glass filter trough, the detailed steps are not difficult.

Fish farming veteran. 2019-10-29Top 100 Creators**People Hangzhou Yawn Dog Culture Media****, **People Hangzhou Yawn Dog Culture Media****, high-quality creators.

Many aquarists like to make their own fish tank filter tank, some are used to using the finishing box, because the volume is large enough, and some like to use glass to make it, because my original fish tank shelf design is unreasonable, I didn't think about adding three rows of fish tanks at the earliest, so the upper space of the fish tank is too small, and the filter tank can not be too big.

I think so for this thing, how big we have the filter tank and filtration, how many ornamental fish to raise, this is no problem at all, many novice fish farmers will always feel that their filter tank is too small, and many veteran fish farmers, will always feel that the filter tank is too big to use, for my 80 fish tank, there is a small filter tank is enough.

1. Calculate the size of the glass.

My plan was to place the tank on the left side of the tank, which would be the width of the bottom two compartments, so the specific dimensions of the whole tank were 40 cm long, 20 cm wide and only 10 cm high, using 5 thick glasses.

Then the first two large surfaces are 40 times 10 cm of glass two, and then there are two sides, because of the use of the side of the bottom of the practice, the side to subtract the thickness of the two glass, so the size of the side should be 19 times 10 two pieces of glass, and the bottom glass should be front and back and left and right to remove one centimeter, because it is wrapped in the middle, so it should be 39 times 19 glass piece.

This size is actually not difficult to calculate, but it is easy to make careless calculations and mistakes, so let's be careful.

2. Polishing the edges to prevent injury.

Because the glass is directly cut by the glass shop, I also save trouble, including the bottom of the hole work, I am also afraid that I can't do it well, all I do is to glue it up, now the wage is too expensive, such a set of small filter tank glass money is only 15 yuan, if let people make it, a total of 80 yuan plus a set of labor, 10 sets of 800 oceans, too cost-effective, I myself more than an hour 10 small filter grooves are finished.

So the first step to go home is to grind the edge, this person is not to grind, the edge grinding is actually very simple, you need a small grinding wheel on the line, as long as the glass is ground so that you can't cut your fingers, this job is relatively simple, very easy to do, remember to wear gloves, and try not to operate on the hard ground to prevent the glass from breaking.

How to make an ultra-simple entry-level aquatic and land ecological fish tank 2

<> square 100*40 glass on a flat ground, and then fix the *80 glass around the 100*40 glass with wide transparent tape.

Evenly apply glass glue to the inner joint.

After the glass glue on the inside is cured, remove the scotch tape on the outside.

Then cut the angle aluminum into 4 80cm2, 94cm2 and 46cm. Apply it evenly to the inside of the angle aluminum with glass glue, and then fix it separately at the connection on the outside of the fish tank.

Use 10*40 glass to connect and glue 100*80 glass from the inner upper mouth 10cm downward, and test the water after the glass glue is completely cured, and there is no leakage.

The production method and steps of the fish tank are as follows:

Buy the right fish tank glass and cut the glass with a glass knife according to the size you need. For example, the cuboid shape is composed of two square pieces of glass (plug), two pieces of rectangular glass (side), and a base plate of rectangular glass (bottom plate).

The width of the square (plug) must be the same as the width of the rectangle (side), and the length and width of the glass of the bottom plate of the fish tank can be slightly longer than the two sides of the fish tank by 3 5 cm, so that the fish tank will look better. Use sandpaper to smooth each edge of the cut glass so that the edge of the glass will not hurt your hands. When edging, it's best to do it in a well-cleaned place because there will be a lot of debris.

Each piece of sand glass is numbered and glued. Install the glass glue on the glue gun, and put the glass edge to be glued in order. For example, (plug) (side) each piece of glass has three sides of glass glue, and the bottom plate can not be glued.

Put two (side) pieces (plugs) on the bottom plate in order to form a cuboid shape. Then round the junction of the glass edge (inside and outside) with glass glue, and you can use your fingers to press the glue fuller. In this way, the fish tank is ready, don't move it again to let the fish tank be placed on the 5 or 7 days, and the glass glue will dry, and you can fill the water to raise fish.

Buy the right fish tank glass and cut the glass with a glass knife according to the size you need. For example, the cuboid shape is composed of two square pieces of glass (plug), two pieces of rectangular glass (side), and a base plate of rectangular glass (bottom plate).

Now more and more people are raising fish at home, which can not only beautify the home environment, but also cultivate sentiment, fish farming is indispensable for fish tanks, but the fish tanks on the market are more expensive, so many people have the intention of making their own fish tanks, so what are the methods of making fish tanks? How to make a homemade fish tank isolation net? Let's take a look!

1. What are the production methods of fish tanks?

First of all, you should prepare watercolor pens, rulers, glass guns, sandpaper, glass and glass glue, use a glass knife to cut the glass to the size you want, and mark the serial number on each piece of glass; Load the glass glue on the glass gun, beat the glass glue on the glass edge in order, and then form a rectangle of the glass in order; Fix the connection of the glass edge with glass glue and leave it for five to seven days.

2. How to make a self-made fish tank isolation net.

1. Before making the fish tank isolation net, we need to determine the size of the isolation net according to the size of the isolated fish, and measure the length, width and height of the material, so as to ensure that the fish have enough space to move. The fish tank isolation net should use a flexible cloth net to avoid the fish being injured during the activity.

2. The fish tank isolation net can also be made with acrylic, the production method is very simple, and the cost is low, you only need to buy a few acrylic plates on the market, and place the acrylic plate in the middle of the fish tank, which can also play the role of isolating the fish, which is convenient and the effect is also very good.

3. Use acrylic plate to make fish tank isolation net, you can punch holes in the acrylic board, so as to facilitate the flow of water flow in the fish tank, of course, if you feel that it is very troublesome to make fish tank isolation net, you can also buy it outside.

Summary: What are the methods of making fish tanks and how to make their own fish tank isolation nets, I believe that we have a certain understanding of the production methods of fish tanks, and I hope to help friends in need. In the process of making a fish tank, it is necessary to determine the size of the fish tank and pay attention to the transparency of the fish tank material.

As follows: 1. The first stage is to find a way to get a base cabinet. This priority is the problem of cost, if you want to be cheap, you can only do it yourself, do it yourself, you have to choose the right materials, and finally choose the universal angle steel, and assemble it yourself after buying it back.

2. The second stage is the pasting of the master cylinder.

3. Sticky ribs, the glass glass of the stretch is narrow and long, it is not easy to glue, and I found a way to fix it.

4. Enter the fourth stage and debug the whole cylinder.

5. In this way, the fish tank is done.

Fish tank, a kind of water tank for live fish, the tank body is transparent, mostly glassy, and the ridge is wide, which can be used to raise tropical fish or goldfish for ornamental purposes. The fish tank is not only the home of the fish, but also the common life enjoyment of the people of Jiaye Haru. The flawless double-layer float glass not only creates a warm home for the fish, but also ensures the safety of the overall living environment.

Enter the area and get the decoration for free**].

Nowadays, when decorating a new house, most people will design a large fish tank to increase the beauty of the interior, and at the same time can relieve the tired body and mind of the individual, so as to achieve the effect of killing two birds with one stone. So what is the process of making a large fish tank, how to burn it together and how to add fish to your own fish tank, do you know it? Now let's take a look.

1. How to make a large fish tank in the production process, make a fish tank design drawing for your own situation, and purchase the required materials; Use sandpaper to polish the edge of the glass and paste it according to the design drawing. After the large fish tank is pasted for 2 hours, check whether each gap is glued and properly repaired; After the fish tank is ready, put the water to see if it will leak. 2. How to add fish to your own fish tank 1. When you add larger fish to your own fish tank, there will be two situations: the first is that there are mostly large fish in the fish tank, so you need to ensure that the size of the fish is about the same; The other thing is that most of the fish in the tank are smaller fish.

2. If the fish in your own fish tank are larger fish and are about the same size, then when you add larger fish to the fish tank again, there will be no swallowing situation, but you may be chased by the original fish in the fish tank. 3. The fish that is chased and bitten, if they do not get food for a long time, will slowly become emaciated and finally die. Therefore, when new fish are inserted, the tank needs to be isolated with a glass sheet, and after a certain period of time, the isolation is removed.

4. If most of the fish in the fish tank are small fish, then 3 to 5 days after moving the new fish, the new fish will cause damage to the smaller fish in front of the fish tank, and there will be an anti-guest phenomenon, so it is also necessary to isolate for a period of time. About the process of making a large fish tank and how to add fish to your own fish tank, this is the first introduction, do you know about it? Large fish tanks will not have the same decorative effect in your home, but you need to add fish to the tank to ensure that they do not interfere with each other.

Do the math how much it will cost you to renovate your home