What do you need to do to clean and maintain the crystal lamp?

The response time of LED lights is nanosecond, I don't quite understand whether you want to ask the composition of LED lamp beads or the composition of LED light signs? The ** of LED depends on the specific color, brightness, chip and packaging form to decide, and it is difficult to give you a specific reference by simply asking. This needs to be decided according to your detailed parameters and requirements, you can find the led manufacturer, tell them your requirements, and then let them give it to you**.

If you want to make your own billboards, you need LEDs, power supplies, circuit boards, connecting wires, resistors, etc., if you need special effects, you must also match the controller to do the decoration budget, first of all, you must know which parts of the decoration budget include, the decoration budget roughly includes material costs, labor costs, design costs, and management fees. Before making a decoration budget, the owner needs to discuss with the designer, let the designer draw the house design drawing, generally speaking, the designer will ask the owner about how much money he wants to decorate, at this time the owner had better not say a specific number, if the owner says a specific number, the designer will think about the materials used according to this number when designing; If the owner does not say a specific number, the designer will try to use cheap and high-quality materials in order to retain customers, so as to reduce the cost of materials. The cost of materials needs to be estimated by the owner according to his own economic ability, first control the total price, and then ask the market, the owner first lists the list of materials, and then runs the building materials market, calibrates the approximate ** of each material, the owner must not be afraid of trouble, at least three building materials market, basically run three building materials market owners can understand the approximate material, so as not to be fooled by building materials dealers.

1. Remember not to place the chandelier in a house that is easy to get wet, as it will easily make the chandelier fall off. And it is necessary to check it frequently and irregularly.

2. It is best not to clean the lamps with water, as long as you wipe them with a dry rag dipped in water, if you accidentally touch the water, you should also try to wipe them dry, and do not wipe them with a wet rag immediately after turning on the lamp, because the bulb is easy to burst when exposed to water at high temperature.

3. Renovation of lamp stands. Lamp stands with real electroplated 24k gold can generally be maintained for five years or more without fading; Consider refurbishing it in five years to feel brand new.

4. Regular inspection. Lamps and lanterns hung in important positions or places with a lot of people should be safe and stable in the first place. Headlights often weigh hundreds of kilograms, and in case of fall, the consequences are unimaginable.

Therefore, people should be regularly sent to inspect the embedded parts and load-bearing hooks and chains hidden in the ceiling to prevent aging without being aware and causing accidents.

5. Update in a timely manner. If it is not possible, you should also check whether the performance of the wires inside is in good condition, and replace them if they are found to be sticky or aging to ensure safety.

6. Professional maintenance. Large lamps and lanterns, complex circuits (with graded lights), it is best to hire professional and technical personnel of the lamp wide and noisy decoration company to clean and maintain the crystal lamp, which is not expensive, easy to repair and safe and reliable.

1.Wipe of crystal beads:

When wiping the beads, be sure to have a soft cloth dipped in water diluted with dish soap, and gently wipe the front and back of the crystal beads at the same time (do not pinch the beads and pull them down when wiping, so as not to tear off the beads).

2.Keeping the Jewel Balanced:

If you want to remove all the beads and clean them, large lamps and lanterns should pay attention to the balance of the beads when dismantling the beads, and do not dismantle one side and then the other side and cause the tilt of the beads, resulting in the deformation of the beads or the outer frame; It should be disassembled with front, back, left and right.

3.Wipe the bracket accessory:

When wiping the bracket and accessories, the soft cloth should not be wet, especially not the alcohol water, so as not to damage the protective film outside the electroplating layer and affect the surface gloss effect of the light stand.

4.Stay safe:

When wiping the light stand, cut off the power supply; The bulb should also be removed and wiped clean before putting it back on; The bulb should be puffed in moderately, too loose will produce poor contact; If you want the crystal lamp to get the most out of it, it's best to choose a plain transparent bulb instead of a frosted or colored bulb.

5.Replace accessories in a timely manner:

It is found that the connecting buckle of the beads is rusty and discolored, one is not beautiful, and the other is easy to be brittle, so it is best to replace it by the way; If a defect is found, it should be made up in time.

In a villa full of pastoral style, there is a crystal lamp with a European design, taking the owner into the fairy tale of autumn, which is the dream of many people, but if the crystal lamp is not very clean, or there is a small bulb that does not light up, it is a very disappointing thing, how to avoid this regret? Do a good job of cleaning and maintaining the crystal!

We all know that the crystal lamp is placed in a very good place, it will not stick to dust, as the days go by, it will become darker and darker, so regular cleaning is necessary. So how do you clean it?

1. Choose a suitable crystal lamp cleaner for spraying. You can choose and purchase a professional crystal lamp cleaner, spray the appropriate amount of cleaning agent on the crystal lamp, and the dust of the crystal ball or crystal piece will be taken away with the evaporation of the liquid;

2. Remove the crystal lamp for thorough cleaning. In order to avoid fingerprints on crystal lamps, wear white cotton gloves when cleaning crystal lamps. Remove the crystals one by one, dip them in a container of kerosene, and then gently wipe the appearance of the crystals with a toothbrush, and then wash the crystals with laundry detergent after the dust on the exterior slowly softened.

In addition, according to the quality of the detailed crystal lamps, they are treated differently in terms of care, and some only need to use an anti-static dry cloth to wipe off the dirt on the appearance of the crystal lamps.

Fuheng Lighting, the crystal lamp expert by your side.

Commonly used crystal lamp cleaner.

To clean the crystal lamp, we must first understand what are the cleaning agents for cleaning the crystal lamp, and the most crystal lamp cleaners we use in our daily life are the following:

1. Spray special detergents. This detergent is a special detergent for the cleaning of crystal lamps, which only requires you to spray the detergent on the crystal lamp, and you do not need to use a cloth to wipe it, and the dust on the crystal ball will be taken away with the volatilization of the detergent, which is very simple.

2. Kerosene. Kerosene is a good detergent to clean the dirt on the surface of the crystal, we carefully remove the crystal lamp, and then put it into the kerosene, and then use a toothbrush to gently brush the crystal surface, and then wash it again with laundry detergent.

How to clean the crystal lamp.

Due to the particularity of the crystal lamp material, we should pay attention to the following methods and skills when cleaning the crystal lamp

1. When cleaning the crystal lamp, we must pay attention to cleaning safety, that is to say, when we clean the crystal lamp, especially when wiping the lamp stand, we must remember to cut off the power supply and take off the bulb, and wait until the lamp stand is wiped clean before installation.

2. When cleaning the crystal lamp, we should maintain the balance of the lamp body, which means that if we need to remove the bead string when cleaning, we cannot remove the crystal from side by side, but from both sides evenly, so as to prevent the phenomenon of tilting the lamp body due to the inconsistency of weight and reduce the probability of crystal damage.

3. When we wipe the bracket accessories of the crystal lamp, we must pay attention to the soft cloth used to wipe the bracket should not be stained with water or alcohol, so as not to damage the protective film outside the electroplating layer of the bracket and cause its surface to lose its luster.

4. When we clean the crystal lamp, if we find that the connecting buckle between the beads is discolored or rusty, we can replace it by the way to ensure the beauty of the crystal lamp.

Scrubbing and maintenance, you should clean carefully and carefully. You can also have someone clean it.

There are two main points to pay attention to the maintenance and cleaning of crystal lighting:

1. In order to keep the crystal ball or crystal piece crystal clear for a long time, it is necessary to avoid the damage of oil smoke to the crystal lamp.

2. The cleaning of crystal lamps can choose the method of scrubbing the crystal ball or crystal piece one by one, if you feel troublesome, you can spray professional detergent on the crystal lamp, and the detergent can take away the dust on the crystal ball or crystal piece in the process of volatilization.

In fact, you don't need much maintenance, just call a professional to clean it regularly, and you can wipe it when you have time. Don't get scratched by something pointy.

Method 1: Mao shabu, the hair is soft and long, not the kind of paint shabu, the kind of writing brush words, the longer the better, through electrostatic friction, the dust will be removed.

Method 2: You can use a professional cleaning agent, which is similar to the composition of alcohol, which is volatile and takes away the dust in the process of volatilization, but the cleaning effect is not very ideal.

Method 3: Dismantle the lamp and clean it manually.

Prepare tools and supplies such as ladders, cloths, and detergents. 2. Turn off the power first, and lay a sponge mat directly under the crystal lamp to prevent the ladder from scratching the floor, and to prevent the crystal ball from being damaged in case it falls.

3. Stabilize the ladder, and one of them climbs up and takes down the crystal balls one by one and puts them in the bucket to take them down in turn (take a pen and paper to mark the locations of different crystal installations clearly when picking them up for installation).

4. Bolt the bucket with the crystal ball to the faucet, pour it into the bucket like a professional cleaning agent, and pour water to clean it one by one. Then wipe off the water droplets of the crystal ball and wipe the bulb off with a dry towel.

5. After the person on the ladder picks off the crystal ball, wipe the electroplating lamp stand with a towel.

6. After wiping, start to install according to the drawing.

Remarks: 1. It is recommended to replace the butterfly buckle, pin and other small five pieces on the crystal ball every time the crystal lamp is cleaned, so as to avoid the danger of the crystal ball falling off due to the short crack of the hardware after disassembly and assembly.

2. In order to avoid fingerprints and sweat stains printed on the crystal, wear white cotton gloves when cleaning. 3. The hardware of the lamp stand must be wiped dry with a towel with strong water absorption, otherwise it will cause oxidation and rust due to moisture.

After installation, turn on the power and check whether the crystal lamp is normal.

Crystal lamps work really well indoors. But often the owners ignore the problem of its use and cleaning because of the aesthetic role.

If the crystal chandelier is rusty, the treatment is also very convenient, as long as you go to the street to buy some transparent varnish, dilute it with thinner, and then apply a thin layer with a row pen, wait to dry, and apply it again, you can form a transparent film on the surface of the chandelier, so as to prevent the erosion of moisture in the air. At the same time, every other day on weekdays, you have to wipe it with dish soap to keep it bright forever. If the crystal chandelier has accumulated dust for a long time, the chandelier should be carefully removed, and the parts must not be broken.

Because the real crystal hanging piece is particularly easy to break, and then use an enamel basin to hold half a basin of alkaline water. Dip it with a toothbrush and soak the crystal piece to scrub; After brushing, the mud and dirt are easily removed. Osgona crystal lamp.

Wipe with a rag, you can spray some Bili Bead on the rag, this crystal lamp will look brighter and easier to take care of.