How to clean a crystal lamp, how to clean a crystal lamp properly

The method is as follows: 1. Turn off the power first, and lay a sponge mat directly under the crystal lamp to prevent the ladder from scratching the floor, and to prevent the crystal ball from being damaged in case it falls.

2. Prepare for manual cleaning of independent parts. Prepare tools and supplies such as ladders, cloths, and detergents.

3. Stabilize the ladder, and one of the people climbs up and removes the bulb first to prevent it from bursting.

4. Because the crystal ball is heavier, in case the crystal string is disconnected, take it down one by one and put it in the bucket first, and take the crystal ball down in turn (take a pen and paper to mark the position of the different crystal installation clearly when picking it up, so as to install it).

5. Take off the crystal string alone, the crystal string is lighter, and the whole string can be taken off, and you don't need to take it off alone, because the hole is small and easy to break, so it is ideal to take off the whole string and clean it. (Put the ones in the same position together, in case you can't find them when you hang them up, and divide them into categories).

6. Bolt the bucket with the crystal ball to the faucet and pour it into the bucket like a professional cleaning agent, and pour water to clean it one by one. Then wipe off the water droplets of the crystal ball and wipe the bulb off with a dry towel. The same is true for crystal strings.

7. After the crystal is picked, the remaining lamp stand can be wiped clean with a cloth with water or diesel, and it is best not to use water to prevent oxidation.

8. After the crystal parts are cleaned and the water is evaporated, the installation begins according to the drawings.

9. Turn on the power and test whether the lamp can be normal to prevent short circuit.

Washing steps. Before disassembly, turn off the power first, and do not scrub the lamp holder with a wet rag to prevent leakage;

When scrubbing, you can turn over light-colored cotton socks or double bath towels on your hands and wipe the lamps gently;

After cleaning, the lamps should be installed as they are, and no missing or wrong parts should be installed. Do not change the structure of the luminaire or replace its parts casually.

Lampshade cleaning: cloth lampshade, first use a small vacuum cleaner to suck off the surface dust, and then pour some dish soap to scrub. If the inside of the lampshade is a paper material, avoid using detergent directly to prevent breakage, and wipe it with a dry cloth.

The frosted glass lampshade is cleaned with a soft cloth dipped in toothpaste, and the dirt on the uneven areas can be treated with a toothpick wrapped in a soft cloth.

After removing the dirt on the metal lampholder, squeeze a little toothpaste on the cotton cloth to scrub it.

A tip: Pour about a cap of a beer bottle of vinegar into half a basin of water, soak a rag in it, wring it out and wiping the lamp.

Precautions: Remember not to place the chandelier in a house that is prone to moisture, as it will easily cause the chandelier to fall off. And it is necessary to check it frequently and irregularly.

It is best not to clean the lamps with water, as long as you wipe them with a dry rag dipped in water, if you accidentally touch the water, you should try to dry them, and do not wipe them with a wet rag immediately after turning on the light, because the bulb is easy to burst when exposed to water at high temperatures.

The answer is provided by Oufan Lighting, focusing on European-style crystal lamps.

Remove it, and protect the gaps and charged places with things to prevent water from entering. Then spray it with a decontamination detergent or something, and after a while rinse it with water from top to bottom, don't use a cloth, just rinse with water.

Remove the shell, soak in warm detergent water, and rinse with water.

There should be a lot of tutorials on the Internet for this kind of problem, because I also just cleaned my crystal lamp not long ago, and I also searched for methods on the Internet, as if I found the method on a blog called Han Siyu, and there is a lot of knowledge about crystal lamps, I hope mine can help you.

You can check the cleaning method on the Internet, my crystal lamp cleaning last time I invited a cleaning company called Zhongwei, the cleaning is very good, the price is not high, it is very troublesome to clean it yourself, hehe.

The cleaning of crystal lamps is more troublesome. An article in the introduction experience "How to clean and maintain crystal lamps" for you, you can take a closer look, it may be helpful to you.

The method of cleaning the crystal lamp is as follows:

1. Use special detergents.

The surface of the crystal lamp can not use ordinary cleaning agents, such as using clean water to clean not only can not completely clean the surface of the crystal ball, but also affect the brightness of the crystal, because the brightness of the crystal lamp is better than its crystal clear material, if the use of incorrect detergent to clean, this will cause the surface of the crystal lamp to be damaged, which will affect the brightness of the crystal light.

Now there is a special cleaning agent for crystal lamps on the market, which is very convenient to use, you only need to spray it on the surface, and then the dust and dirt on it will be taken away in the volatilization of the detergent, and then wipe the surface of the crystal lamp with a wet rag, so that it is simple and convenient to clean.

2. Use kerosene.

In addition to using a special detergent, you can also use kerosene to clean the crystal lamp. Use an old toothbrush dipped in kerosene to scrub the crystal lamp, and the stubborn dirt on the surface of the crystal lamp will be cleaned quickly. If you can remove the crystals one by one, it will be better to soak them in kerosene.

After washing with kerosene, brush with laundry detergent water again, and clean it with water.

3. Add vinegar and water.

Add an appropriate amount of water to the white vinegar, then soak a hot towel in it, wring it into a semi-dry state, and gently wipe the surface of the crystal lamp, and you can easily clean the crystal lamp.

4. Microparticle jet degaussing and quick-drying cleaning method.

This washing method is more professional, generally for professional crystal lamp cleaning equipment, with imported cleaning ingredients, cleaning and degaussing of lamps and lanterns, the whole process does not need to be disassembled, and the cleaning speed is very fast, washing dishes is like new.

5. Remove them one by one and clean them.

However, if you want to clean the lamp thoroughly, it is best to disassemble the lamp and clean it one by one, but this is more troublesome. In the process of disassembly, the rusty parts on the crystal lamp can be replaced, which is not only more beautiful, but also can effectively reduce potential safety hazards.

What are the cleaning methods of crystal lamps?

1. Professional detergent cleaning.

Online and professional stores can buy specialized] cleaning detergent, ** is not very expensive, 500 ml is about 100 yuan can be bought, so that the special detergent as long as it is evenly sprayed on the lamp, quietly waiting, the detergent on the crystal lamp due to volatilization to take away the dust and dirt on the lamp head and crystal in the morning, is not very convenient.

2. Manual cleaning.

Manual cleaning needs to prepare a soft cleaning cloth or cleaning brush, so as not to damage the appearance of the crystal lamp, the best tool is a long brush, to be long and soft, the best is the kind of writing brush words, the longer the better, through electrostatic friction, will remove some slit dust, the surface of the crystal lamp dirt is wiped with a soft cloth dipped in water or special detergent.

3. Disassemble and clean.

Remove all the parts of the lamp, soak it in clean water, then wash it with detergent, and finally wipe it dry with a soft cloth. In the cleaning and other dramas, it is necessary to do different treatments according to the different qualities of the crystal lamps, and if you can't wash it with water, you can simply wipe it with a soft cloth, and pay attention to wearing gloves during the cleaning process to avoid hurting yourself at the sharp end of the crystal lamp, and you should also pay attention to the safety of electricity, after all, the lamps are connected to the power supply.

Note: During the cleaning process of the crystal lamp, if the accessories are found to be rusty, the brightness of the bulb is not right, etc., it should be dealt with in time to maintain the life length of the crystal lamp and let the lamp regain its brilliance.

Process:1Prepare tools and supplies such as ladders, cloths, and detergents.

2.Turn off the power first, and lay a sponge mat directly under the crystal lamp to prevent the ladder from scratching the floor, and to prevent the crystal ball from being damaged in case it falls;

3.The ladder is steady, and one of them climbs up and takes down the crystal balls one by one, puts them in the bucket, and takes them down in turn (take a pen and paper to mark the different crystal mounting locations clearly when picking them up for installation);

4.Bolt the bucket with the crystal ball to the faucet, pour it into the bucket like a professional cleaner, and fill it with water to wash them one by one. Then wipe off the water droplets of the crystal ball and wipe the bulb off with a dry towel.

5.After the person on the ladder picks up the crystal ball, wipe the electroplating lamp stand with a towel;

6.After wiping, start to install according to the drawing.

Extended reading: Precautions:

1.It is recommended to replace the butterfly buckle and pin on the crystal ball every time you clean the crystal lamp, so as to avoid the danger of the crystal ball falling off due to the short crack of the hardware after disassembly and assembly.

2.To avoid fingerprints and perspiration stains on the crystal, wear white cotton gloves when cleaning.

3.The hardware of the lamp stand must not be wiped dry with a towel with strong water absorption, otherwise it will cause oxidation and rust due to moisture.

I think it is more troublesome for individuals to clean by themselves, so it is recommended that you go to Aishihua Lighting ** to help you clean, their cleaning technology is very good.

1. The kitchen smoke is very heavy, so it is best not to hang crystal lights to keep the crystal ball or crystal piece crystal clear for a long time.

2. Attention should be paid to moisture-proof lighting maintenance, especially the kitchen stove in the bathroom, etc., and the installation of moisture-proof lampshades to prevent moisture intrusion and prevent rust damage to lamps.

3. To clean the crystal lighting, you need to pay attention to wiping the crystal ball or crystal piece on it, if you feel that it is time-consuming and laborious, you can also spray a professional glass cleaner, the detergent will take away the dust in the process of volatilization. Here is a reminder that it is best not to brush the lamps with water, but to use a moist rag.

4. The lampshade, bulb, and lamp tube have been cleaned regularly, and a side of dust blocks the light. If black deposits are found on both ends of the lamp, it should be replaced immediately.