What are the maintenance and cleaning methods of integrated ceilings

The cleaning of the integrated ceiling should be based on the material of the integrated ceiling

1. Clean up with soft items, such as rags and the like, it is best not to use steel wool balls, if it is a bright panel, after scrubbing with steel wool balls, it will leave traces and affect the appearance;

2. If it is metal, then remember to ventilate it after cleaning;

3. In the process of use, keep the kitchen dry in order to make the ceiling last longer.

Easy to clean is one of the advantages of integrated ceilings, so it has become the first choice for many family kitchen and bathroom ceiling decoration, however, although the integrated ceiling is easy to clean, if it is not maintained for a long time, it will also affect the luster and beauty of the ceiling.

Maintenance of the integrated ceiling heating module: do not switch the heating module frequently, and ensure that there is no large vibration around it during operation, otherwise it will affect the service life of the heating bulb; When it is turned on after a long period of non-use, it is necessary to do a circuit and bulb check, and turn it on for 3-5 minutes to see if it is working properly. If there is a problem, please ask professional and technical personnel for maintenance.

Maintenance of the integrated ceiling lighting module: try not to switch on and off frequently when using the lamp, because at the moment of frequent start-up, the current through the filament is greater than the current during normal operation, which will cause the temperature of the filament to rise sharply and accelerate the sublimation, thereby greatly reducing its service life. In addition, after the lamp is used for a period of time, the luminous flux will drop significantly, and the lamp will become darker and darker.

Maintenance of integrated ceiling ventilation module: do not open and close the ventilation fan of the integrated ceiling frequently, remove oil stains regularly, and do not use corrosive chemical solutions when cleaning, otherwise it is easy to damage the plastic parts and the outer layer of paint. Lubricating the motor should be filled regularly.

When the ventilation fan is reinstalled after cleaning, the fan nut must be tightened to prevent the fan blade from rotating and flying out after power-on, and accidents may occur.

If you install an integrated ceiling at home, it looks very beautiful and magnificent. However, it is necessary to pay attention to regular cleaning. How to clean the integrated ceiling? PChouse will take you to find out.

1. Avoid using hard objects to clean the ceiling.

When cleaning the ceiling of the glossy panel, special attention should be paid not to scrub it with tools such as hard objects and cleaning balls, as this will leave small strips of scratches on the glossy panel, which will affect the aesthetics of the ceiling.

2. Carry out regular deep cleaning.

The laminated board should be deeply cleaned once a month, and the brushed board and nano-roller coated board should be cleaned once every six months or even a year. Deep cleaning should be carried out in two times, the first time with a soft cloth moistened with water, the second time with clean water, open the window to ventilate and dry naturally.

3. Properly protect the flat ceiling when cleaning.

The force used to scrub the middle part of the panel can be slightly greater, but when scrubbing the perimeter of the panel, the force should be light, so as not to affect the flatness of the integrated ceiling.

4. Maintenance of ceiling panels.

Because the kitchen has a large amount of oil smoke, it is necessary to wipe it regularly when encountering oil stains and scale, and it can be cleaned with a soft layout; If you encounter a damaged or heavily soiled monograph, you can replace and update it, but pay attention to the color difference.

Since the integrated ceiling has a very aesthetically pleasing decorative effect, it is necessary to take good care of it on a regular basis. How to maintain the integrated ceiling? PChouse will take you to find out.

Try not to switch frequently when using the lamp, because at the moment of frequent start-up, the current through the filament is greater than the current during normal operation, it will make the temperature of the filament rise sharply and accelerate the sublimation, which greatly shortens its service life, so the switching of the lamp must be minimized. After a period of use, the luminous flux of the bulb drops dramatically and the bulb becomes dim and dim. At this time, it is necessary to pay attention to replacing the new light source in time.

Ventilation fans should not be replaced frequently, oil should be removed regularly, and corrosive chemical solutions should not be used when cleaning, otherwise plastic parts and exterior paint will be damaged. Lubricate the motor regularly. When cleaning and reinstalling the ventilator, the blade nut must be tightened.

It is also necessary to carry out regular insulation acceptance of power cords and electrical equipment on a regular basis, and the damaged parts should be dealt with in a timely manner. Keep your restroom ventilated, clean, and dry at all times to extend the life of your equipment and panels.

Do not switch heating modules frequently. During operation, make sure that there are no large vibrations around, otherwise it will affect the lifespan of the heating bulb. If it is not used for a long time, please check the circuit and bulb.

First, turn it on for 3-5 minutes and see if it works. If you have any questions, please consult a professional technician for overhaul.

1.It needs to be cleaned separately, wipe the place without oil stain with clean water, and add cleaning agent to clean the place with a lot of oil stain.

2.Regularly inspect the condition of the heating equipment, replace the ventilation equipment in time, and maintain the lighting equipment.

The home environment should not be too dry, not too humid, should be ventilated frequently, there should be no open flames, and it should be cleaned frequently.

When we mention the time of the suspended ceiling, we do not open the integrated ceiling. So what integrated ceilings are there on the market now? What kind of surprises do these integrated ceilings bring to us?

Which is better to decorate the integrated ceiling.

What kind of integrated ceiling is better? The integrated ceiling is made of metal materials, which is divided into aluminum alloy gusset plate, aluminum-magnesium alloy gusset plate, aluminum-magnesium-manganese alloy gusset plate, etc., which has good elasticity and toughness, and is not easy to deform, suitable for use in kitchen and bathroom.

After upgrading, it can be used better with lighting, exhaust, audio, etc.

Why do we have such a statement. Gypsum board ceiling is to use paint to cover the installation of the joints, just after the decoration is completed, feel the effect can be, but for a long time, if the process is not in place, the original cover up of the seams and latex paint will crack, affecting the overall aesthetics, at this time if you want to maintain the beauty, you must repaint. Although gypsum board itself has good moisture-proof performance, the surface coating does not have moisture-proof function.

It is a headache for the owners of the south. The plaster ceiling that is whitened with paint will become moldy and yellow after a long time.

What's good about these integrated ceilings? The integrated ceiling is a fully modular combination, although there are seams, but just like tiles, it can be used as decorative moldings, which does not affect the overall effect at all. There will be no cracking, and the surface treated aluminum plate can last as long as new.

Even if adjustments are required, they can be easily done by simply changing modules.

How to clean the integrated ceiling.

Integrated ceiling cleaning method 1: In general, consumers will choose brushed boards, nanosheets and laminated boards to install in the kitchen. The oil resistance of brushed and nano plates is very good, so it is easier to maintain during normal maintenance.

Consumers can clean it every six months or a year, and only need to wipe it with a soft cloth dipped in water when cleaning, or add a little dish soap.

Integrated ceiling cleaning method 2: The laminated board should be deeply cleaned once a month, and the brushed board and nano-roller coated board should be cleaned once every half a year or even once a year. Deep cleaning should be carried out twice, the first time with a soft cloth moistened with water, the second time with clean water, open the window to ventilate from the mountain to dry.

Integrated ceiling cleaning method three: try not to switch on and off frequently when using the lamp, because at the moment of frequent start-up, the current through the filament is greater than the current during normal operation, which will make the temperature of the filament rise sharply and accelerate the sublimation, thereby greatly reducing its service life, because the switch of the lamp should be minimized. After the lamp is used for a period of time, the luminous flux will drop significantly, and the lamp will become darker and darker.

The introduction of integrated ceilings is shared with you here. In our lives, with the deepening of people's understanding of integrated ceilings, more and more integrated ceilings have entered people's faces. At this time, when we have a comprehensive understanding of the relevant methods of integrated ceilings, we can have a comprehensive grasp of it.

Kitchens and bathrooms are generally equipped with integrated ceilings, but most families do not do maintenance and maintenance. Over time, some ceilings may change color or even rust and fall off, which not only affects the beauty of the decoration, but also affects the safety and health of the living environment. SoKitchen and bathroom integrated ceilingHow do you clean and maintain it?

1. Cleaning of integrated ceilings in kitchens and bathrooms

1. Cleaning of the integrated ceiling in the kitchen.

Under normal circumstances, we will choose the buckle plate in the kitchen to be painted more, and a few use brushed, which is also a better process in the roller coating, not many people in order to save money when the film board, the former cleaning because it is in the kitchen, there will be oil stains, then use a small amount of dish soap, but there must be sufficient water to mix, to use a softer, better absorbent cloth to scrub after water, it doesn't matter if you can use force in the middle, but when you are around, the force should be light.

In particular, pay attention to not hard cloth and cleaning balls and the like, as soon as you scrub it, it will leave a lot of small wires on the shiny panel, damaging the gusset, at this time, if it is a roller coating, it is not good, if it is a film, it is not good. Another point is that if you use the kind of cheap differential plate, heavy one, then be careful, because it has a lot of iron components in it, not an aluminum-magnesium alloy gusset, so after seeing water, it is easier to rust.

When the first time with a soft towel soaked in water scrubbing, the second time with water to scrub it, open the window ventilation to dry naturally, if the ventilation and sunlight is not good, then use a better quality towel once.

2. Cleaning of the integrated ceiling in the bathroom.

Generally speaking, there are no oil stains, it is easy to take care of and clean, often use a soft cloth with water to scrub it, a month or two months, use the method of cleaning the kitchen to do a care, the situation of the corridor is similar to the bathroom, or to explain that if it is that kind of poor board, then it is better to clean and take care of it less, and usually use a soft cloth to remove the dust, because the more you clean, the faster the rust will come out. It's no problem to have a good board for more than ten years, your cheap buckle board, only three years of chance, after three years, it will start to rust out from the side, and in the end the whole thing will be ugly, and you will regret that it was so cheap that dozens of yuan a square, it's not worth it.

Second, the maintenance of the kitchen and bathroom integrated ceiling.

The metal alloy panel is very resistant to water and scrubbing. In daily cleaning, it can be scrubbed with detergent, and then cleaned with water; The cracks between the kitchen boards are susceptible to oil stains, so you can use a brush dipped in detergent to scrub them when cleaning, and then clean them with water; Be careful not to get wet on the lighting circuit. Pay attention to the timely cleaning and maintenance of the integrated ceiling.

In this way, the service life of the integrated ceiling can be extended and its value can be exerted.

AboutKitchen and bathroom integrated ceilingThe relevant information on how to clean and maintain it is introduced to you here, I hope this article will be helpful to you. If you still don't understand something, you can leave me a message below, and we will answer it for you as soon as possible.

Classification of gypsum board ceiling materials.

How to install the gypsumboard ceiling flow chart.

How to choose an integrated ceiling for integrated ceilings.

The advantages and disadvantages of light steel keel light steel keel are selected for the ceiling.

Do you need to pay attention to the maintenance of integrated ceilings?

In our decoration, there is a lot of craftsmanship in the ceiling. Keel ceilings are common, but there are also integrated ceilings. Integrated ceilings usually include gusset modules, lighting modules, ventilation modules, heating modules, etc.

The integrated ceiling usually needs to pay attention to maintenance. Because it has a lot of modules, once we don't maintain it, a module is broken, then there will be a replacement, and it will be more expensive to replace. So we usually pay more attention to maintenance.

Not only can we save money, but we can also make our integrated ceilings last longer.

How to maintain the integrated ceiling?

In addition to the hygienic maintenance of the surfaces, in-depth maintenance of each module is carried out. For example, the maintenance of the gusset module with integrated ceilings. Frequent cleaning of the gusset module is not recommended.

Too much maintenance will reduce the service life of the gusset. According to the different gusset process, the cleaning frequency is also different. Attached templates only need to be cleaned once a month.

Brushed plates and roll-coated plates can be cleaned once every six months.

Then there is the lighting module with integrated ceiling. The core of the lighting module is the lamp, and the lamp does not need to be cleaned and maintained, only need to wait until it is replaced after its normal aging, and the service life of the lamp will be very long. <>

There is also the ventilation module with integrated ceiling. The main heart of this module is its motor and ventilation fan. From time to time, the ventilation fan is dusted.

This can also extend his lifespan. Finally, there is the heating module. This is the same principle as the light bulb and does not require us to maintain it.

Summary.

If our decoration is an integrated ceiling, then we must pay attention to cleaning and maintenance. But don't clean it too often, there are no obvious stains on the surface and we don't need to clean it. If the gusset is stained with oil, you can use dish soap with a damp cloth to scrub it.

It is not recommended to wipe with a hard object, as this may cause scratches on the gusset and affect the aesthetic effect. <>