What problems need to be paid attention to in advance when installing an integrated stove

1. Determine the installation location of the integrated stove.

1. The installation of the integrated stove needs to avoid some places as much as possible to prevent the poor effect of oil smoke: the installation position of the integrated stove avoids the upwind direction of the window, if you choose next to the window and it is the wind direction, if you open the window to use, it will affect the cleaning rate of the oil smoke, if the window is the wind outlet, it is recommended to avoid the window position.

2. Determine the direction of smoke exhaust, the position of the gas meter and the gas pipe when positioning, and prevent the gas meter and gas pipe from affecting the placement of the smoke exhaust pipe; The distance between the smoke exhaust direction of the integrated stove and the wall where the flue is located is greater than 30 cm, and should not exceed 2 meters.

3. Try not to design the basket on the left and right sides of the integrated stove, if the basket is designed, please determine the depth of the basket in advance to prevent the basket from blocking the power plug-in line, smoke exhaust pipe and gas pipeline of the integrated stove.

4. The left and right sides of the integrated stove need to be connected to the gas, connect the power supply, and the smoke exhaust pipe, so the integrated stove needs to be wired, and the ventilation side cabinet is opened, and the gas interface and power cord interface can be opened with square holes and round holes.

5. The distance between the installation hole and the left and right walls shall not be less than 300mm, and the distance between the working surface of the stove and the cabinet above shall not be less than 750mm. For models with a steamer, a 500 mm wide space in front of the machine is required to allow the steamer door assembly to be fully opened. In order not to affect the smoke exhaust effect, the length of the external exhaust air duct should not be greater than 2 meters, and the sharp turn of 90 degrees should not exceed 2.

2. Reserve the integrated stove socket.

When reserving the position of the power socket of the integrated stove, please confirm the socket used by the integrated stove in advance, the mainstream Martian integrated stove steamer, X7 self-cleaning model, and one electric and one gas model on the market use a 16A power cord, so please use a 4 square wire when routing the wire, and connect the 16A power socket; The rest of the integrated stoves can use a 10A power socket. The socket position can be selected in the cabinets on the left and right sides of the integrated stove, and the distance from the integrated stove is generally kept within 50 cm.

3. Determine the reserved size of the cabinet.

The length of each integrated stove is different, after determining the model, choose to reserve the corresponding model length size, when reserving the size, add 5mm on the basis of the length of the integrated stove to ensure that the integrated stove is put in, and the extra length can be connected and closed with glass glue after the installation is completed;

Fourth, determine the location of the wall opening.

When the position of the wall opening is determined, it is determined according to the position of the machine, generally more than 12 cm from the ground, and the smoke pipe is connected from the side of the machine is vertical, and the hole diameter is generally 16-18cm, and the hole opener on the market is generally 18cm.

5. Reserve the exhaust outlet.

The size of the exhaust outlet of the integrated stove should be played according to the size of the exhaust pipe of the product. The smoke exhaust outlet should have a large diameter at the outer mouth and a small diameter at the inner mouth to prevent rainwater from backing up.

The details that need to be paid attention to when installing an integrated stove at home.

When the integrated stove is installed, there are mainly five details that need to be paid attention to: installation location, exhaust pipe, gas stove, power socket, and the whole machine. It's not that it's difficult, but some sizes, distances, and steps require special attention.

First, the installation position selection.

The back of the integrated stove should be more than 5cm away from the wall, and the side should be no less than 20-25cm away from the wall, and if the wall is a flammable material, a fireproof layer should be installed between them. Since liquefied gas or natural gas is used, the installation location should be well ventilated to prevent a small amount of gas leakage and discharge it in time.

2. Exhaust pipe.

The length of the exhaust pipe should be controlled within 2 meters, and the elbows can not be many, controlled within two, the turning radius should not be too small, the length, the number of elbows and the turning radius are not suitable will increase the wind resistance in the pipe, which is not conducive to exhaust. The outlet of the exhaust pipe is connected to the interface of the check valve, and the check valve damper must be installed vertically to ensure that the blades of the check valve can be closed naturally and the breeze can be opened flexibly and freely.

3. Gas stove.

The gas connector is equipped with a gasket (black oil-resistant rubber), and the gasket must be inserted into the step at the gas connection of the whole machine first. If the gasket enters the interface, it is not completely on the step of the interface, which will cause leakage. Owners who use cylinder liquefaction must use fixed pressure reducing valves, and adjustable pressure reducing valves are not allowed.

Fourth, the power socket.

The electrical outlet should be grounded. Sockets and gas connections are not allowed to be installed in cabinets in the same direction. For models that use a combination of induction cooker and gas cooker, the power cord must be above and the power supply must be above 3mm to ensure that the power cord does not heat up under load.

Fifth, the whole machine. When installing the whole machine, it is necessary to pay attention to the cooperation with the cabinet, to ensure that the whole machine must be able to move after installation, not restricted by the cabinet, and pay special attention not to buckle the cabinet counter panel on the upper edge of the side panel of the whole machine. The whole machine should be kept in a forward-tilted state, and the front must be three millimeters higher than the back, which is conducive to the drainage of the water tray of the stove cavity.

1. For the installation of the integrated stove, people must find a professional installation master, because the circuit, ventilation, and heat dissipation outlets of the integrated stove must be specially laid out, so that people can use it safely. If the master you find is not professional, then there will be all kinds of problems in subsequent use.

2. There should be no gaps between the integrated stove and the wall when installed, if there is a gap, because the things can't be picked up if they accidentally fall down, and the food can't be cleaned if they fall down, it will be moldy and smelly, and cockroaches or insects will survive in it.

3. Before the installation of the integrated stove, people should preset the installation size. When making cabinets, the cabinet position should be reserved according to the size of the integrated stove, so as to avoid the integration stove cannot be installed into the cabinet during later installation.

4. If the gas stove is combined with other kitchen utensils, the wall where the integrated stove is located should be fireproofed. And the integrated stove should be installed in a well-ventilated location to avoid gas or natural gas leakage and exhaust.

5. If the integrated stove that people buy is side-suction, then people should pay attention to whether it is parallel to the smoke exhaust pipe when they hit the smoke exhaust outlet.

6. After the integrated stove is installed, people should turn on the power and start, and then try whether the fire can be fired, whether the flame is a blue flame, whether other key functions can be used, if there is no problem, then the integrated stove can be used.

1. In the installation sequence of cabinets and integrated stoves, cabinets should be installed first, and then integrated stoves should be installed. However, the user must reserve the installation position in advance according to the size of the integrated stove.

2. What is the specific reason? First, "the cabinet is a three-point product, seven-point installation", obviously the design and installation of the cabinet is more time-consuming, and it must be customized first. The installation of the integrated stove is easier and more convenient, the construction period required is very short, and it will not affect the design and installation of the cabinet.

3. Second, and it is particularly important to confirm in advance whether the size of the integrated coarse mu stove can be suitable for the cabinet when matching the integrated stove and the cabinet, it is recommended that you choose the integrated stove first and then choose the cabinet, and when buying, you must tell the seller the size you need and the size of the cabinet. Owners who have not prepared in advance are likely to be unable to install the integrated stove due to the unsuitable size. Therefore, the kitchen should first make cabinets and then install the integrated stove, and it is necessary to reserve the smoke stove hole and the size of the integrated stove.

The advantages of the integrated stove lie in the advantages: ultra-high smoke extraction rate, which can isolate the pollution source and the external environment in both directions; Space-saving, eco-friendly stove in one, and the design of the lower row. The disadvantage is that it wastes heat energy, and some deep well cooker hoods will also take away a lot of heat when inhaling; It is difficult to clean, because the integration of the integrated stove is relatively high, so it is more difficult to clean it deeply.

Now there are more and more families with integrated stoves in the kitchen, and the biggest advantage of the integrated stove is that it saves space, which is a good choice for families with small kitchen space. The integrated stove adopts the lower exhaust smoke, and the smoke pipe does not occupy the hanging cabinet space, while the range hood should be the upper exhaust smoke, which will occupy a certain amount of hanging cabinet space. Therefore, in terms of space utilization, the utilization rate of integrated stoves is higher.

In terms of the effect of oil smoke, there is no obvious difference between the top suction side suction type and the integrated stove. In terms of price, the integrated stove is relatively high. The specific choice depends on your own situation, if the kitchen space is small and the storage space is not enough, you can choose an integrated stove to make efficient use of space.

If you have a limited budget, you can choose a top suction or side suction range hood.

I've renovated the house myself, how can I say that? The integrated stove is not expensive, the condition is good, the kitchen is large, then choose the integrated stove, it must be used when it is convenient and tidy items, after all, the good integrated stove is powerful and easy to use. But when choosing the integrated function, you should try to integrate the commonly used functions in the future, such as the oven, the disinfection cabinet, the dishwasher, the family can be selected, if the population is small, it is very chicken ribs to use these appliances, like one or two bowls and plates placed in the dishwasher, the kung fu sink is also flushed out, and the two bowls with the dishwasher are also washed for half a day.

Waste of water and electricity. > my home is 18 years to buy the integrated stove, at that time for the integrated stove is not very well understood, is a friend recommended the brand called Zun Shuai integrated stove, when I bought it is not cheap at about eight thousand, the integrated stove is the side suction lower row mode for the space utilization rate at home is still good, and there is also a disinfection cabinet below, usually used to place some tableware or something, if the shortcomings then must be there is the first is ** too expensive, my home has not appeared too big a problem until now, I don't know how to repair the hemp trouble, To sum up, there are disadvantages, but the advantages outweigh the disadvantages, you can first understand the integrated stove.

Integrated cookers are now very popular, not only because they do not take up space, but also because of their intelligent operation. In the era of rapid room development, the integrated stove with a small kitchen is a good choice, which not only takes up less space, but also perfectly matches with the kitchen, making the kitchen look clean and tidy.

The operation of the integrated stove is also very simple, touch buttons, smoke stove linkage system, better absorb the fumes, and there is formaldehyde or smoke at home, it will automatically turn on the smoke machine and make a sound to warn everyone.

It is best to choose the top ten brands of integrated stoves, independent research and development and production, ***, many styles, and after-sales guarantee.

I know that it is because it will feel very convenient, and after installing it in the kitchen, it can play a great role in cooking.

Because the integrated stove is a multi-functional combination design, this design is very practical and also looks good, so it is very popular.

Because the integrated stove is more convenient to use, it can save a lot of functions, save the space of the kitchen, and make the utilization rate of the kitchen higher.

Because this thing is more convenient to use, it is very in line with the conditions of many people now.

This is because the integrated stove is a relatively common design, and the integrated stove can also facilitate people's lives to a greater extent. And the use of the integrated stove is also very simple. There are also a lot of features that can be used.

This is because the integrated stove is very easy to use, and it is also very convenient and has many functions, so it will be like this.

The installation of the integrated stove is very simple, first of all, the socket is reserved in advance, and its smoke exhaust port is underneath. Again, if you make a cabinet in advance, like the merchant asking about the size of the integrated stove, you can reserve the size of the integrated stove in advance. Finally, wait for the store to come to install.

Generally, the top ten brands of integrated stove enterprises are installed door-to-door, and they do not need to do it themselves.

When the integrated stove is installed, it is necessary to pay attention to the reservation of holes in advance, whether the integrated stove is purchased with natural gas or liquefied gas, it should be noted that the integrated stove bought should match the overall cabinet, and it does not appear abrupt in the kitchen.

Do not leak gas and check that there is no gas leakage before installation. Electricity can't be on one side.

Pay attention to the separation of gas and electricity, but generally after buying, the store will help you install it, and any problems can be solved.

Place an order in advance to set the integrated stove and renovate the hydropower line.

1. Handle it gently when installing, and pay attention to breaking.

2. The installation process shall be carried out in accordance with the standard.

3. Debug and teach customers how to use it after installation.

4. The relevant origin should also be adjusted.

Reserve a place and punch holes in advance to allow the cabinet to enter later.

Consult with the owner of the integrated stove store before renovating the kitchen, and they will give guidance.

Communicate with the store owner in advance, before tiling. Just leave the rest to the store.