How to trim a brush, how to repair a brush

1. Soak the brush well with water, and then use a paper towel to absorb the water on the brush.

2. Squish the brush with your hands.

Third, it can be seen that some of the hairs are too long.

Fourth, use tweezers.

Clamp the overly long hair clip to separate the outer position, and be careful not to use too much force.

<>6. Take scissors and cut it from the middle position.

7. Re-soak after cutting.

8. In this way, the brush is trimmed and very neat.

1) To activate a new pen, the first pen must be opened. Soak the pen back in warm water, and soak it in water for too long, until the pen is fully open, and the gelatin of the pen root can not be dissolved, otherwise it will become a "hair brush", and the hair is easy to fall off. Purple hao is hard, so it is advisable to soak it in water for some time.

2) Moisturizing the pen is a necessary work before writing, and you can't write as soon as the pen is dipped in ink. The method is to soak the pen with water first, and then lift it, and do not soak it for a long time, so as not to dissolve the gelatinization of the root of the pen. After that, hang the pen upside down until the tip of the pen regains its toughness, which is about 10 minutes.

The pen must be dry when preserved, if the pen is not moistened, the hair will become brittle and easy to break, and the elasticity is not good. 3) After that, you can start writing, which is also very knowledgeable. In order to be even, and so that the ink can penetrate into the pen, the water must be blotted dry first, and the pen can be gently dragged on the absorbent paper until it is dry.

The so-called "dry" is not completely dry, as long as the water is removed to hold the ink. "The ink of the pen is three points, and it is not allowed to be deeply immersed until it is weak and weak", the ink is too dry, and it cannot be carried **, and the ink is weak and weak, all of which are not good. 4) Wash the pen immediately after writing.

The ink has gelatin, if not washed off, the pen will be firmly bonded with the ink and glue after drying, and it is not easy to melt away when it is used again, and it is very easy to damage the pen. 5) After washing, first absorb the remaining water of the pen and straighten it out before entering the ink. Hang the pen on the pen holder to allow the remaining water to continue to drip until it dries.

It should be carefully placed in a cool place to dry in the shade to preserve the original shape and characteristics of the pen, and should not be exposed to sunlight. Follow-up: Don't you need to trim it, thank you.

Use scissors to cut it diagonally from top to bottom, so that the tip of the brush is as thin as possible, and of course, the top is not too thick! In this way, it will have a good effect in the future.

It is best to scrape gently with a sharp blade. Don't use scissors. The blade easily scrapes out a conical shape.

The characteristics of the brush are sharp, straight, round, and healthy according to this standard, carefully scrape with a blade!

1. First of all, we prepare the brush that needs to be trimmed, then soak the brush fully with water, and then use a paper towel to absorb the water on the brush.

2. Then we flattened the brush that absorbed the water by hand, and saw that some of the hairs were too long.

<>4. We can take scissors to cut off the excess hair from the middle position.

5. After cutting, it is re-soaked again, so that our brush is trimmed and very neat.

Here's how to bury the brush as follows:

1. Use scissors to cut the brush obliquely from top to bottom, so that the tip of the brush is as thin as possible, and do not let the brush be too thick near the barrel;

2. The characteristics of the brush are pointed, Qi and round, and the brush is gently scraped with a blade according to this standard.

The brush is a traditional writing tool originating from China, and it has gradually become a traditional painting tool. The brush was invented by the Han people in the production of real shoots. With the continuous development of human society, the industrious and intelligent Han nation has constantly summed up experience, preserved its essence, discarded its dross, and had the courage to explore and innovate.

For thousands of years, it has made outstanding contributions to creating the glorious culture of the Han nationality and promoting cultural exchanges between the Han nationality and all ethnic groups in the world. The brush is the Han nation's world.

If the brush is cut out, there are several ways to try to fix it:

1.If the tip of the brush is cut off, you can leave a part of the root of the brush, and then gently comb the bristles neatly and use scissors to cut the nib neatly.

2.If the barrel of the brush is cut, you can use a slender wooden strip or bamboo tube to connect the broken joint, and then fix it to restore the original shape of the brush.

3.If the bristles of the brush are cut, you can try to trim the root of the brush with scissors, then comb the bristles neatly, and fix the brush with glue or thin thread to restore the original shape of the brush.

If none of the above methods can restore the brush to its original shape, you can try using the egg method. Here are the steps to repair a brush using the egg method:

1.Crack the eggs and remove the whites for later use.

2.Put the washed brush in the egg white and dip it repeatedly.

3.Repeatedly run the bristles from the root down to the tip of the pen by hand, and then hang it upside down in a cool place to let it dry naturally.

4.Soak in warm water when using.

It should be noted that when using the egg method to repair the brush, it is necessary to keep the temperature of the egg white not too high to avoid damaging the bristles. At the same time, if you use glue to fix the brush with water or a thin wire, you need to be careful not to fix it too tightly to avoid damaging the bristles.

Step 1: It is recommended to wash the brush thoroughly with Minlv shampoo, then scald it with boiling water, and straighten the hair on the tip of the pen with your hands.

Step 2: Break the eggs, put the egg whites in a container, put the freshly washed brush into the egg whites, and dip them repeatedly.

Step 3: It is very important to repeatedly brush the bristles from the root of the bush to the tip of the pen with your hands, and then hang it upside down in a cool place to dry naturally. The next time you use it, soak it in warm water, just like a new pen.

1. Soak the brush well with water, and then use a paper towel to absorb the water on the brush.

2. Squish the brush with your hands.

Third, it can be seen that some of the hairs are too long.

Fourth, use tweezers to clamp the excessively long hair clip to separate the position outside, pay attention not to too strong.

<>6. Take scissors and cut it from the middle position.

7. Re-soak after cutting.

8. In this way, the brush is trimmed and very neat.

Hair broken?? Or the tip of the pen is broken, the hair is broken, one can be replaced, but to go back to the glue and re-rub it yourself.

Brush repair method:

1. Causes of rod cracking:

1. Improper selection of pen barrels. 2. The storage is not suitable, and the climate is related to the north and south. 3. If the use time is too long, the root of the pen head will swell when it touches the ink and water, and shrinks when it is not in use, resulting in cracking of the bamboo rod.

Repair method: 1. If the middle of the rod is cracked, the crack can be smeared with adhesive. 2. Pay attention to the method of use and storage. 3. If the root of the pen tip is cracked, it can be tightly wrapped with silk thread and coated with adhesive to avoid the pen tip falling off. The pen top pen bucket falls off and the bond is not firm, and the adhesive is not used properly and the adhesive is used to re-bond (water-resistant glue).

Second, the reason for the pen tip to fall off:

1. The penbore is too large and the bond is not firm. 2. The manufacturer uses an adhesive that is not water-resistant due to improper adhesive.

Repair method: 1. Use water-resistant adhesive to re-bond. 2. To select the adhesive used for sticking plexiglass.

3. Causes of sporadic hair removal:

1. The floating brush worker cannot be cleaned, and it is normal for the new pen to start. 2. The bond is not firm. 3. The pen tip is not tightly made. 4. The use time is too long. 5. When using, the bristles are broken with too much force, or the dry and wet time is too long and stuffy.

Repair method: 1. Before using the new pen, clean the floating hair. 2. Use a syringe to inject the adhesive into the root of the pen tip, and then stand the brush head upright for drying.

3. It is normal to use it for too long and the hairs will rot. 4. The bearing capacity of the fine hair is not equal, it should be suitable for the bearing capacity of the pen hair, pay attention to the pen method, and the high-quality sheep hair pen has strong wear resistance.

Fourth, the reasons for continuous hair removal or bunch hair loss: 1. The root of the hair head is not firmly bonded 2. The ink is very corrosive, and the ink quality is too poor, so that the pen head is moldy, and the root of the pen is the most susceptible to mold. 3. After shabu-shabu, it is not hung up to dry, inserted into the pen holder or put into the pen sleeve, and the ink penetrates into the pen for too long, causing the brush hair to rot.

4. The quality of rough production and wool selection is too poor.

Repair method: 1. To re-bond, inject adhesive. 2. After use, the ink should be cleaned, and the inferior ink should be omitted. 3. After shabu-shabu, it should be hung up to dry, not put into the pen cover. Inject adhesive when hair removal is severe. 4. Be cautious and pay attention to the purchase of reliable quality products.

Fifth, the service life of the brush is short, and the wear resistance is poor: 1. The pen is made, the heat treatment temperature is improper, and the alkaline water immersion time is too long. 2. The paper is too rough.

3. Inferior quality ink. 4. Improper maintenance, damage to the pen edge. 5. Use too much force when using the pen.

6. The quality of the hair is too poor. 7. The variety of brushes is different.

Repair method: 1. Use a brush with ***. 2. Choose better paper.

3. Choose better ink. 4. Attention must be paid to protection. 5. Improve the rules of pen movement.

6. When buying a pen, carefully identify the quality selection, and do not believe the seller's rhetoric. 7. Different breeds of animal hair, different grades and prices, and different service life.

Sixth, the sharp bend: 1, made of inferior wool. 2. The production selection is not fine, and the oil stains are not properly handled. 3. Poor maintenance or bending the pen.

Repair method: 1. Pay attention to the selection when buying, spread out the pen to see Fengying, and look at the vice. 2. It cannot be repaired. 3. After use, rinse the ink, hang it to dry, and do not touch the pen when keeping.

Wash the pen immediately after use, do not put on the pen sleeve after washing, and blot the remaining water and straighten it out. Put the pen in a cool place and hang it upside down to dry in the shade or store it with a pen curtain, and do not expose the pen to the sun.

Don't lick the fur in your mouth; Do not use it outside of writing and drawing; It cannot be used in solvents; The nib sleeve is used as a protective nib during transportation, and should not be installed again once the pen is used to prevent rot and hair loss.

1. Use up the ink in the bristles.

The main purpose of using up the ink in the pen hair is to make the pen more concise, and the method is to write on the paper without dipping the ink after writing, and the ink in the belly of the pen is used up.

2. Soak the pen first and then wash the pen.

It is best to wash the brush in a fixed vessel, such as a basin, sink, etc. Soak the brush in a certain amount of water, and the water does not need to be too much, so it is good to cover the brush. Soak for about 20 seconds, so that the ink in the belly of the pen can be released, making it easier to wash the pen.

You can't soak the brush in water, so that after a few days, the barrel of the brush will crack.

3. Do not hurt the pen due to pen washing.

During the process of washing the pen, always keep the tip of the pen downward, and you can gently touch the bristles with your fingers, but do not pluck the bristles too hard. You can stir the tip of the pen in the water, but not for too long, as this will damage the root of the pen. To wash until the brush is lifted out of the water, squeeze the water oozing from the bristles with your fingers without too much ink, so that the brush is basically clean.

Finally, squeeze out the remaining water in the pen with your fingers or absorbent paper to end the pen washing process.

Keeping a pen: When writing, when you don't write for a short time, you are afraid that the pen hair will be dried by the wind, so you can put the pen cap on temporarily. But when you don't write for a long time, after the pen is cleaned, you should air dry it naturally, don't wear a pen cap again, and the pen hair can not always be wet, especially the residual wet ink, which will definitely hurt the pen.

Because of the alternation of dry and wet, the pen barrel is easy to crack, and the pen tip sometimes falls off, and the current all-purpose adhesive is glued on, which is a trivial matter compared with the workmanship and quality of the pen bristles. In addition to the normal natural wear and tear, sometimes the residual ink sticks to the bristles, which is not easy to wash down with water. What we should know is that pen hair is also animal hair.