My computer win8, one click on my computer, has been minimized and cannot be maximized

This is a problem with the system, only restore the system or reinstall, this is why I must prepare the restoration software before using the computer, open the built-in restoration, system problems are frequent, and the problem is not solved in ** settings, right?

win78 restore the system, right-click on the computer to select attributes, select system protection on the right side, system restoration, follow the steps to do it, if there is a restore software, you can also use the software to restore the system.

win8 how to restore the system.

If you have turned on the restore of the system, if you have backed up the image backup, if you have restored the software software, if you have pre-installed the genuine system, if you do not have it at all, you can not restore the system after reinstalling it and making the above preparations, and you can restore it next time something happens.

1) Right-click on the computer to select properties, select system protection on the left, select the disk to be protected in the protection settings, click on the above to restore the system settings and previous versions of the file, press OK in the selected disk usage, and set a few disks to protect a few disks, and set them according to the above method. In this way, the system will automatically back up, or you can manually back up, select Create at the bottom of this page, and create the restore point yourself. The restore method is:

Win7 or 8 restore the system, right-click on the computer to select attributes, select system protection on the right side, system restoration, and follow the steps to do it.

2) Win8 Create Image Method: Open the control panel, select Save your file backup copy through file history in System and Security, wait in the lower left corner of the open page, win7 file recovery will be displayed, select Create system image, do it as required (the bottom left is not win7 file recovery, but create a system image).

3) If you use software to back up your system:

This is stable 8 is not stable enough.

Dear, I am glad to answer for you, according to the question of your computer point minimization is not responding, to provide you with the following answer, computer point minimization is not responding to check whether your keyboard is working properly. Sometimes, the computer not responding to the minimization command can be caused by a malfunctioning keyboard. You can try pressing the "Windows" key and the "D" key to minimize all windows, if this command doesn't work properly, then your keyboard may need to be replaced.

Check your system settings. Sometimes, system settings may prevent your computer from responding to minimized commands. You can try opening the Sail Control Panel, then selecting Appearance & Personalization, then selecting Taskbar & Navigation Steal, and then checking that the Automatically hide taskbar option is enabled.

Summary. The computer point minimization is not responsive and the method is as follows1Check to see if there are other programs or windows running, and if so, close them and try restarting your computer.

2.Check for viruses or malware that are affecting the normal operation of your computer, and you can run antivirus software or system security software. 3.

Check to see if your mouse or keyboard has been disconnected or has a low battery, and if so, you can replace it or reconnect it after charging. 4.To try to close the program or window manually, you can press and hold Ctrl+Alt+Delete key combination to open the task manager, find the program you need to close and click the "End Task" button.

The computer point minimization is not responsive and the method is as follows1Check to see if there are other programs or windows running, and if so, close them and try restarting your computer. 2.

Check for viruses or malware that are affecting the normal operation of your computer, and you can run antivirus software or system security software. 3.Check to see if your mouse or keyboard has been disconnected or has a low battery, and if so, you can replace it or reconnect it after charging.

4.To try to close the program or window manually, you can press and hold Ctrl+Alt+Delete key combination to open the task manager, find the program you need to close and click the "End Task" button.

The first step of the computer screen cleaning method: When you want to remove the dust on the monitor screen, remember to turn off the power of the monitor, and you must also unplug the display power cord and signal cable. Step 2:

Clean the mirror surface with a special mirror wipe, dry paper, dry flannel cloth or a wet flannel cloth moistened with a small amount of water, carefully wipe from the center of the screen outward. Do not wipe the display with chemical solutions such as alcohol, let alone use rough cloth, paper and other items to wipe the display, and do not spray liquid directly onto the screen to avoid moisture invading the inside of the display. Step 3:

Clean the case first with a brush or a small vacuum cleaner to carefully wipe the dust off the monitor case. If there are still some dirt that is not easy to wipe off, you can use a dry flannel cloth or a dry flannel cloth slightly moistened to wipe it. It is important to note that you should be very careful when cleaning the control buttons or knobs on the display panel.

Hello dear, glad to answer for you: If your computer program does not have a maximization option, you can try the following methods to solve the problem:1

Use keyboard shortcuts: Most Windows operating systems support the use of keyboard shortcuts to maximize windows. Try pressing"alt"key and"Spaces"key, and then press"x"key, which will open the system menu of the window and select it"Maximize"Options.

If this shortcut combination doesn't work, you can try other keyboard shortcuts, such as"win"Key + arrow up arrow. 2.Use YOUR MOUSE to operate:

Try moving your mouse to the upper right corner of the window, then place your mouse pointer over the window's expansion button (usually a box), and click the left mouse button. This will maximize the window. 3.

Use the system tray: Find the program's icon on the Windows taskbar, right-click on the icon, and select"Maximize"Options. This will maximize the program window.

4.Change the program's settings: Some programs may have their own window settings options.

You can try the pants and try them out in the program's menu or settings"window"or"Display"options and see if there is a maximized selection option.

How have you been doing it lately? Try uninstalling all the software, patches, and drivers before the accident, and take a look at the following methods. If the fault persists, it is recommended to check and kill the bad Trojan horse and repair the system.

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).

2. If the fault is stupid, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ) positive file leakage, insert the original system disk to repair the system, and the system will automatically compare and repair.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

See if the second display screen is detected.,And then give you the interface to automatically put it on the second display that doesn't exist.,Dig Shen just encountered a problem solved today.。