How to use lights when driving a motor vehicle to overtake at night

When driving a motor vehicle to overtake at night, change the high and low beams.

Because in order to achieve safe overtaking, you must first "let the car in front know your intention to overtake", at night, the same lights will definitely not attract the attention of the car in front, so the purpose of using the method of "changing the high and low beams" is to attract the attention of the car in front and overtake safely.

The main use of lights includes:

1. If you are about to turn at the intersection, please use the correct lights (alternate high and low beams no less than 2 times).

2. If you are driving on a low-visibility road, please use the correct lights (turn on the high beams).

3. If you are about to pass through a sharp bend, please use the correct light (alternate high and low beams no less than 2 times).

4. If you are going to pass through the slope, please use the correct lights (alternate high and low beams no less than 2 times).

5. If you are going to cross the arch bridge, please use the correct lights (alternate high and low beams no less than 2 times).

6. If you are going to cross a pedestrian crossing, please use the correct lights (alternate high and low beams no less than 2 times).

7. If you are going to pass through an intersection that is not controlled by a traffic light, please use the correct lights (alternate high and low beams no less than 2 times).

8. If you are about to overtake, please use the correct lights (turn on the left turn signal first, then alternately use the high and low beams no less than 2 times, and then turn on the right turn signal).

9. If you are going to meet other vehicles, please use the correct lights (turn on the low beams).

Overtaking, that is, the vehicle goes to the side of another vehicle, and crosses the vehicle behind the vehicle with the same mark. The lane used for overtaking is usually the inside lane, which is the lane closer to the middle of the doorway and farther away from the shoulder. In areas where you drive on the right, the overtaking lane is the left-hand lane; In areas where you drive on the left, the passing lane is the lane on the right.

Overtaking is an unavoidable and dangerous behavior of a car while driving. It is necessary to be proficient in technology and skills, and to obey traffic laws and regulations to prevent accidents and accidents.

Use of lights when driving a motor vehicle to overtake at night: turn on the left turn signal in advance, change to high and low beams, or honk the horn. If you have poor visibility at night, you should change the use of high and low beams to alert other vehicles.

Article 47 of the Implementing Regulations stipulates that when a motor vehicle overtakes, it shall turn on the left turn signal in advance, change the use of high and low beams or honk. If you have poor visibility at night, you should change the use of high and low beams to alert other vehicles.

a. Transform high and low beams.

b. Turn on the fog lights.

c. Turn on the high beams.

d. Turn off the headlights.

Answer: Article 47 of the "A Implementing Regulations" stipulates that when a motor vehicle overtakes, it should turn on the left turn signal in advance, change the use of high and low beam lights or honk. If you have poor visibility at night, you should change the use of high and low beams to alert other vehicles.

Turn left and then change the high and low beams.

When overtaking at night, you must first inform the vehicle in front of you with far and near light when the road conditions permit, and then turn signal to the left after the car in front gives way, and then turn signal to the right after about 20 meters, drive back to the original lane, and must not forcibly overtake to avoid accidents.

To overtake at night, use the high beams to flash two or three times to prompt you to overtake, and if the car in front of you keeps to the right to give you an overtake.

When overtaking at night, first use the low beam to turn into a high beam to flash a few times and change it to a low beam, and hit the turn signal, in overtaking to let the other party know that you are going to overtake, he will definitely let you, use low beam when overtaking, do not use high beam.

When you want to overtake at night, shake the car in front with your high beams Under normal circumstances, the car in front will understand that the car behind is going to overtake.

When overtaking at night, the driver should turn on the left turn signal in advance, switch to the use of distant trembling lights and low beams, or also honk the horn.

At night, the vision is poor, and the purpose of changing the use of high and low beams is to alert other vehicles. Proper use of lights can avoid dangerous situations, especially at night when visibility is poor. Before overtaking at night, pay attention to the right side of the overtaken vehicle to see if there are any obstacles, so as to avoid collisions caused by the overtaken vehicle by avoiding obstacles.

Before overtaking, you should continuously change the high beam and low beam, inform the vehicle in front through the light, and then operate after judging that you can indeed overtake. During driving, you must always keep a relatively safe distance from the vehicle in front of you, especially when you pass through the intersection, you must be extra vigilant. An effective safety distance can effectively avoid the occurrence of a rear-end collision caused by sudden braking of the vehicle in front.

Methods of using car lights:

1. In addition to the light control key of the car under the steering wheel, there is also a position near the door.

2. If you want to turn on the low beam, you need to twist the button twice to the right, and the low beam will turn on.

3. Twist to the right to turn on the width indicator light.

4. Pull the button up to be the front fog light, and then pull it out to be the rear fog light.

5. After turning on the low beam, if you need to adjust the high beam, there is a lever under the steering wheel, and the high beam will turn on by pushing the lever down.

6. The control of the left turn signal is also in the position of the lever, the clockwise toggle of the paddle is the right turn signal, and the counterclockwise toggle of the paddle is the left turn signal.

How to use the lights when driving a motor vehicle to overtake at night?

a. Turn off the headlights.

b. Turn on the cavity wax fog lamp.

c. Turn on the high beams.

d. Transform high and low beams.

Correct answer: d

Article 47 of the Regulations for the Implementation of the Road Traffic Safety Law:

When a motor vehicle overtakes, it should turn on the left turn signal in advance, change the use of high and low beams, or honk the horn. If your vision is poor at night, you should change the use of high and low beams to alert other vehicles.

1.When a motor vehicle overtakes at night, the driver should turn on the left turn signal, or continuously change the use of high beams and low beams to remind the owner in front of us that our vehicle is going to overtake, or you can also honk the horn to remind the owner in front of you, and then operate after judging that you can indeed overtake.

2.For the sake of safety during driving, when overtaking at night, pay more attention to whether there are obstacles next to the overtaken vehicle, so as to avoid collisions caused by the overtaken vehicle because of avoiding obstacles, and only operate when it is determined that it can overtake.

3.No matter which section of the road you are driving on, you must keep a safe distance from the vehicle in front at all times, and when passing through the intersection, you must observe more and move forward on the premise of ensuring safety. Only by keeping a sufficient distance can you avoid rear-end collisions when the vehicle in front suddenly brakes, which can lead to accidental traffic accidents.

Here's how to use lights when driving a motor vehicle to overtake at night:

When driving a motor vehicle to overtake at night, turn on the left turn signal first, then alternate the high and low beams no less than 2 times, and then turn on the right turn signal.

Instructions for using lights at night:

1. Turn at the intersection at night and use low beams.

2. When driving on low-visibility roads at night, turn on the high beams.

3. At night, it is necessary to pass through sharp bends and alternately use high and low beams no less than 2 times.

4. At night, it is necessary to pass the slope and alternate the high and low beams no less than 2 times.

5. At night, it is necessary to pass through the Gongqingbi Bridge, and alternately use the high and low beams no less than 2 times.

6. At night, you should pass through the pedestrian crossing and alternately use the high and low beams no less than 2 times.

7. At night, pass through the intersection without traffic signal control, and alternately use the high and low beams no less than 2 times.

8. To overtake at night, turn on the left turn signal first, then alternately use the high and low beams no less than 2 times, and then turn on the right turn signal.

9. At night, meet with other vehicles and turn on the low beams.