I would like to ask, is there a pile test for motorcycles? What is a pile test???

The pile test is the field driving skills test (subject 2).

To put it simply, draw a rectangular area in the field, erect 6 poles in the middle of the area, and then the examiner drives a motorcycle to bypass the 6 poles in turn in the rectangular area, as long as the motorcycle does not drive out of the rectangular area, does not touch the ground with one or both feet during the test, and does not touch the pile pole, even if the test is passed.

Regulations on the Application and Use of Motor Vehicle Driver's Licenses".

Article 24 The test subjects are divided into road traffic safety laws, regulations and related knowledge test subjects (hereinafter referred to as "subject 1"), field driving skills test subjects (hereinafter referred to as "subject 2") and road driving skills test subjects (hereinafter referred to as "subject 3"). The order of the examinations is according to the subjects.

1. Subjects. 2. Subject 3 will be carried out in turn, and only after passing the examination of the previous subject will you be allowed to take the examination of the latter subject.

For those who apply for a motor vehicle driver's license for the first time or apply for an increase in the type of permitted driving, after passing the subject 1 test, the vehicle management office shall issue a driving skills admission certificate within three days. The driving skills test admission certificate is valid for two years. Applicants should complete the examinations of subjects 2 and 3 within the validity period.

Subject 2: Examination content and passing criteria.

1) The content of the test.

1. Complete the driving of a motor vehicle in accordance with the prescribed driving route and operation requirements in the specified site;

2. The ability to judge the spatial position of the front, rear, left and right of the vehicle;

3. Master the basic driving skills of motor vehicles.

2) Eligibility criteria.

If the following circumstances do not occur, subject 2 will pass the examination:

1. Failure to follow the prescribed route and sequence;

2. rubbing the pile rod;

3. The body is out of the line;

4. The transfer is not entered;

5. Stop twice in the process of driving when parking is not allowed;

6. The engine is turned off;

7. Touch the ground with one or both feet when driving a two-wheeled vehicle.

Ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and mopeds quasi-driving type driving test routes and operation requirements.

Objective: To enable motor vehicle drivers to master the driving skills of three-wheeled motorcycles, two-wheeled motorcycles and mopeds, and to master curve driving and turning.

a) Graphic Design:

Stake spacing. Pile spacing.

1. Legend. Stake position - edge line forward line.

2. Size. 1) The distance between the pile and the edge line is the width of the car plus 30 cm;

2) The pile spacing is:

Ordinary and mopeds: vehicle length plus 50 cm;

Three-wheeled motorcycle: length plus 40 cm;

Side three-wheeled motorcycle: vehicle length plus 80 cm.

2) Operational requirements:

Starting from the starting point, follow the direction indicated by the arrow and drive around the pile to stop at the end point.

We have it in Tieling, I don't know if you have it, the pile test is around the pile.

Ordinary and mopeds add 50 cm to the length; For three-wheeled motorcycles, add 40 cm to the length of the vehicle; The length of the side three-wheeled motorcycle is 80 cm. The pile distance of two-wheeled motorcycles is generally meters - 3 meters.

Pile spacing: 50 cm for the length of ordinary and mopeds; For three-wheeled motorcycles, add 40 cm to the length of the vehicle; The length of the side three-wheeled motorcycle is 80 cm. The termination line is 3 times the length of the car from the last pile. The general requirements are:

Drill 5 rods, S-shaped, spacing, the white line on both sides has more than 1m points, the line pressing, hitting the bar, and the flameout will fail, and the circle will be drilled back after drilling.

Pile test evaluation: 1. Those who do not follow the prescribed route and sequence will be unqualified;

2. If the pile rod is rubbed, it is unqualified;

3. If the body is out of the line and the two-wheeled motorcycle wheel is out of the line, it is unqualified;

4. If the warehouse is reversed or transferred, it is unqualified;

5. If the stop or running time exceeds the specified time, it is not qualified.

Pile spacing: 50 cm for the length of ordinary and mopeds;

Before the drill starts with the drill, the rider also needs to relax his mind and muscles, and his legs will naturally grip the body. After the pile winding, it is necessary to find the angle and speed of the rod.

If the angle is too large or the speed is too fast, it will cause the car body to not have enough steering space and press to the limit width line. The correct approach is to choose to enter from the middle of the sideline and the benchmark in the first or second gear, and after entering, it is necessary to properly cooperate with the oil separation, and try to maintain a semi-linkage state, so that the power output can be cut off in time for corresponding adjustments.

Refueling should be gentle and gentle, and when you find that the position of the vehicle does not match your expectations, you can't pinch the brakes to death. In short, in this process, everything is based on slowness. But this slowness must be well known, and it cannot be slow beyond the limit of maintaining balance.

1) The distance between the pile and the edge line is the width of the car plus 30 cm;

2. Pile spacing: ordinary and moped two-wheeled motorcycles add 50 cm to the vehicle length; For three-wheeled motorcycles, add 40 cm to the length of the vehicle; The length of the side three-wheeled motorcycle is 80 cm.

3. The termination line is 3 times the length of the last pile.

Expand your knowledge: China's Ministry of Public Security has issued a revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" on its official **, which will come into force on January 1, 2013. According to the regulations, the content of the driver's license test subjects and passing standards will be unified across the country.

The content of the motor vehicle driver test is divided into road traffic safety laws, regulations and related knowledge test subjects (referred to as "subject 1"), field driving skills test subjects (referred to as "subject 2"), road driving skills and safe and civilized driving knowledge test subjects (referred to as "subject 3"). The content and qualification standards of the test are unified across the country, and the corresponding test items are stipulated according to different types of quasi-driving.

The content of the motor vehicle driver test is divided into road traffic safety laws, regulations and related knowledge test subjects (also known as "theory test", hereinafter referred to as "subject 1"), site driving skills test subjects (commonly known as "pile test", hereinafter referred to as "subject 2"), road driving skills and safe and civilized driving knowledge test subjects (commonly known as "road test", hereinafter referred to as "subject 3"). The content and qualification standards of the test are unified across the country, and the corresponding test items are stipulated according to different types of quasi-driving.

Ordinary and mopeds add 50 cm to the length; For three-wheeled motorcycles, add 40 cm to the length of the vehicle; Side three-wheeled motorcyclesFor the length of the car plus Keino 80 cm. The pile distance of two-wheeled motorcycles is generally meters - 3 meters.

Pile spacing: 50 cm for the length of ordinary and mopeds; For three-wheeled motorcycles, add 40 cm to the length of the vehicle; The length of the side three-wheeled motorcycle is 80 cm. The end of the Yuankai line is 3 times the length of the car from the last pile. The general requirements are:

Drill 5 rods, S-shaped, spacing, white lines on both sides.

There are more than 1m points, and the crimping, hitting the bar, and extinguishing the ignition will fail, and the drill will be drilled back around the circle.

Pile test evaluation: 1. Those who do not follow the prescribed route and sequence will be unqualified;

2. If the pile rod is rubbed, it is unqualified; Hail calls.

3. If the body is out of the line and the two-wheeled motorcycle wheel is out of the line, it is unqualified;

4. If the warehouse is reversed or transferred, it is unqualified;

5. If the stop or running time exceeds the specified time, it is not qualified.

The above content reference: Encyclopedia - People's Republic of China Motor Vehicle Driver's License.

The distance between the pile and the pile is about two times the length of the motorcycle body, and the distance between the pile and the pile is one meter wide. Ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, mopeds quasi-driving type: size:

1) The distance between the pile and the edge line is the width of the car plus 30 cm; 2. Pile spacing: ordinary and moped two-wheeled motorcycles add 50 cm to the vehicle length; For three-wheeled motorcycles, add 40 cm to the length of the vehicle; The length of the side three-wheeled motorcycle is 80 cm. 3. The termination line is 3 times the length of the last pile.

In addition to the traffic rules, the motorcycle test also has a pile test and a road test, but it is much simpler than a car

Generally speaking, it is in a large venue, first pass the pile, the pile is passed, the road test is to slip around, do an uphill stop, stop, start, this is not important, even if the engine is turned off, it is okay After all, the car is in the examination room, not familiar with it, the examiner will not say anything? The key is to rao the pile, the rule is that the middle of several piles is about 2-3 meters apart, into an S shape to rao the past, in the Rao back, and then Rao a circle, there are any other obstacles or anything in the middle of the way, it is not a problem, when Rao the pile, the foot must not touch the ground, touch the ground and it will be over, next time in the test

Generally, there are not many people who pass at one time, but you can definitely master it well Rao pile speed must be slow Fast can not be spared slow car is not easy to grasp easy to fall down or feet on the ground So you have to control the speed can not be fast can not be slow to the point that you can not master the balance I passed the exam at one time I basically 80% of the people in that exam can not pass It is recommended that you use a gear to pinch the clutch loose to the position where you can drive slowly, and then intermittently add a small throttle Cyclists should know this aspect If it's fast, don't refuel, if it's slow, add a little If it's slow, it's no problem to control it yourself, but the speed must not be fast It's my personal experience I hope it can help you Hehe, word by word, haha, good luck You can do it

The pile spacing of the motorcycle pile test is different according to the different types of motorcycles examined, and the spacing is not the same. Taking a two-wheeled motorcycle as an example, the pile spacing of the two-wheeled motorcycle pile test is 3 meters, and the distance between the pile and the side edge is 1 meter. During the test, you have to drive a motorcycle in an S shape and ride around a stake.

The pile test will be judged according to the following regulations:

1. Those who do not follow the prescribed route and sequence are not qualified;

2. If the pile rod is rubbed, it is unqualified;

3. If the body is out of the line and the two-wheeled motorcycle wheel is out of the line, it is unqualified;

4. If the warehouse is reversed or transferred, it is unqualified;

5. If the stop or running time exceeds the specified time, it is not qualified.

The distance between the pile and the pile is about twice the length of the motorcycle body, and we here are meters between the pile and the pile, and the left and right sides of the pile are one meter wide.

Theoretically: the pile spacing is the length of the car plus 50 cm, and the pile and the edge line are each side of the car width plus 30 cm.

But when I took the test in the DMV, these distances were fixed according to the displacement of the car. It's like 70-90 is a standard, 100 is a standard, and 125 or more is a standard.

So the smaller your car is in the same displacement, the better it is. When I took the exam, I borrowed a Chongqing 80, which was as small as a jade river, and I passed it once.