I accidentally got 502 glue on the back of my phone, how can I remove it?

There's no way, it's all about getting a 502, or go and change the shell.

With banana water. Or a dilution drama.

Summary. Dear, I'm glad to answer for you. [Bixin] [Bixin].

The method of removing 502 glue on the mobile phone screen is: [Bixin] [Bixin].

1. You can use a wet hot towel to stick 502 there. After ten minutes, the cured 502 will become soft and can be removed. In addition, you can put a drop of 502 on the place where there is 502, and the cured 502 will also become soft, so it can be removed with a towel.

2. Add 502 to the original place to melt the original 502, and then quickly wash it off with water.

3. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly.

4. Acetone solution can be washed.

Glue is an instant glue that can be used with a dissolved organic solvent, such as acetone. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle.

6. Stick 502 glue on a small area, as long as you soak it in hot water, if a large area is stained with 502 glue, coated with acetone, it can be removed by waiting for about 5 10 minutes. [Compare hearts].

How to remove 502 glue on the mobile phone screen.

Dear, I'm glad to answer for you. The method of removing the 502 glue on the mobile phone screen is: [comparing the heart] [comparing the heart] [comparing the heart] 1. You can use a wet hot towel to stick the 502 there.

After ten minutes, the cured 502 will become soft and can be removed. In addition, you can put a drop of 502 on the place where there is 502, and the cured 502 will also become soft, so it can be removed with a towel. 2. Add 502 to the original place to melt the original 502, and then quickly wash it off with water.

3. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly. 4. Acetone solution washable glue is an instant glue, as long as a dissolved organic solvent is used, such as acetone.

However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. 6. Stick 502 glue on a small area, as long as you soak it in hot water, if a large area is stained with 502 glue, coated with acetone, it can be removed by waiting for about 5 10 minutes. [Compare hearts].

I hope I can help you

[Bixin] [Bixin].

Here's how to do it: 1. Put the phone flat first, because when the liquid is dropped, it won't flow anywhere. Then drip with China Resources high-efficiency adhesive remover, which needs to be completely covered with 502 glue.

2. The soft glue glue takes about 20 seconds, and then you can touch it with your hands to feel whether the glue has changed. You can feel it's sticky.

3. Use a paper towel to wipe off the glue on the surface. At this time, it can be found that the glue is still left behind, and then it needs to be dripped again, because the glue at the bottom has not softened off.

4. Then use a paper towel to wipe off the glue, at this time, you can find that the glue is all removed and dismantled, and it does not hurt the screen, and the effect is obvious.

Note: 502 glue adheres quickly, preventing ** and clothing from being adhered during operation, this product has weak tear gas, be careful to prevent splashing into the eyes, and pay attention to ventilation when using.

Answer: Find some alcohol, wipe it down, and squeeze the absolute ethanol (in the laboratory) through the gap in the stent, and squeeze it as you warp it, because most of the glue is soluble in ethanol, so it is perfectly removed.

Drinking wine can also be drunk visually, but the best liquor, of course, is absolute ethanol (industrial ethanol is also acceptable), and it can also be wiped with nail remover.