What s the matter with the DJI drone turning on a red light?

It should be analyzed on a case-by-case basis.

Here's DJI.

Description of the drone status indicator:

Normal state. Red, green and yellow flashes continuously for system self-test.

Yellow and green lights flashing alternately to warm up.

Green light flashes slowly for safe flight (P mode, using GPS positioning.

Green light double flashing for safe flight (P mode, positioning using visual positioning system) Yellow light. Slow flashing can be semi-safe flight (A mode, no GPS, no visual positioning) 2Warnings & Exceptions.

Yellow light flashes quickly The signal of the remote control is interrupted.

The red light flashes slowly and the battery is low.

The red light flashes quickly and the battery is seriously low.

The lamp flickers at intervals, is unevenly placed or the sensor error is too large.

Solid red light Critical error.

The red and yellow lights alternately flash the compass.

Data error, calibration required.

Remote control indicator information.

The red light is solid and the power on tone The remote controller is not connected to the aircraft.

The green light is always on, the boot sound is normal, and the remote controller is connected normally.

The red light flashes slowly and the remote control is wrong.

Red-green, red-yellow flashing alternately None The video transmission signal is interfered with.

3.The home return light prompts the status of the aircraft.

Solid white light Start tone Press and hold to turn on the automatic return home function.

Flashing white light Request to return home.

The white light flashes that the RTH is in effect or the aircraft is automatically descending.

DJI Phantom Aircraft Status Indicator Description.

Normal state. Red, green and yellow flashes continuously for system self-test.

Yellow and green lights flashing alternately to warm up.

Green light flashes slowly Safe to fly (P mode, using GPS positioning) Green light double flashing Safe to fly (P mode, positioning using visual positioning system) Yellow light flashes slowly Semi-safe flight (A mode, no GPS no visual positioning) Warning and abnormality.

Yellow light flashes quickly The signal of the remote control is interrupted.

The red light flashes slowly and the battery is low.

The red light flashes quickly and the battery is seriously low.

The lamp flickers at intervals, is unevenly placed or the sensor error is too large.

Solid red light Critical error.

Red and yellow lights flashing alternately Compass data is incorrect, calibration is required.

Remote control indicator information.

The red light is solid and the power on tone The remote controller is not connected to the aircraft.

The green light is always on, the boot sound is normal, and the remote controller is connected normally.

The red light flashes slowly d-d-d....The remote control is wrong. /

Red-green, red-yellow flashing alternately None The video transmission signal is interfered with.

The home return light prompts the status of the aircraft.

Solid white light Start tone Press and hold to turn on the automatic return home function.

The white light flashes dRequest a return home.

White light flashing dd ...The RTH is in effect or the aircraft is automatically descending.

Causes

1. If the temperature of the battery itself is too high and the temperature is too high, the alarm will be eliminated by replacing the battery or unplugging one side;

2. Overcurrent or overvoltage may be caused by external access current and voltage, which is generally the same on both sides, and the elimination method and logic of over-temperature are different;

3. In addition, the charger motherboard is faulty and needs to be sent back for maintenance and testing.

Policies and regulations

Measures for the Management of Air Traffic of Civil Unmanned Aerial Vehicles

In order to strengthen the management of civil unmanned aerial vehicle flight activities, standardize the methods of air traffic management, and ensure the safety of civil aviation activities, the relevant issues related to the air traffic management of civil unmanned aerial vehicles are hereby stipulated as follows:

1. Civil unmanned aerial vehicles shall be engaged in operational flights in industry, agriculture, forestry, fishery, mining, and construction, as well as flight activities in areas such as medical and health care, emergency rescue and disaster relief, meteorological exploration, marine detection, scientific experiments, remote sensing surveying and mapping, education and training, culture and sports, and tourism.

2. Civil drone activities and their air traffic management shall comply with relevant laws and regulations, including the Civil Aviation Law of the People's Republic of China, the Basic Flight Rules of the People's Republic of China, the General Aviation Flight Control Regulations, and the rules of the Civil Aviation Administration.

Take the Phantom 3 ADV indicator meaning as an example, normal state.

Red, yellow, and green flashes continuously--- system self-test.

Yellow and green lights flashing alternately to warm up.

Green light slow flashing --- P mode, using GPS positioning green light double flashing --- P mode, using visual positioning system to locate yellow light slow flashing --- A mode, no GPS no visual positioning warning and abnormality.

Yellow light flashes quickly--- the remote control signal is interrupted, red light flashes slowly--- low battery alarm, red light flashes quickly--- serious low battery alarm, red light flashes at intervals, --- uneven placement or sensor error is too large, red light always on--- serious error, red and yellow light flashes alternately--- compass data error, calibration is required.

DJI Phantom Aircraft Status Indicator Description.

Normal state. Red, green and yellow flashes continuously for system self-test.

Yellow and green lights flashing alternately to warm up.

Green light flashes slowly for safe flight (P mode, using GPS positioning)Green light double flashes for safe flight (P mode, positioning using visual positioning system).

Yellow light flashes slowly Semi-safe flight (A mode, no GPS, no visual positioning).

Warnings & Exceptions.

Yellow light flashes quickly, the remote control signal is interrupted, red light flashes slowly, low battery alarm.

Red light flashes quickly, Severe low battery, alarm light flashes at intervals, uneven placement or sensor error is too large, red light is always on, Serious error.

The red and yellow lights flash alternately The compass data is incorrect, and the remote control indicator information needs to be calibrated.

The red light is solid and the power on tone The remote controller is not connected to the aircraft.

The green light is always on, the boot sound is normal, and the remote controller is connected normally.

The red light flashes slowly d-d-d....The remote control is wrong. Red-green, red-yellow flashing alternately None The video transmission signal is interfered with.

The home return light prompts the status of the aircraft.

Solid white light Start tone Press and hold to turn on the automatic return home function.

The white light flashes dRequest a return home.

White light flashing dd ...The RTH is in effect or the aircraft is automatically descending.

A red light on one side is a serious mistake, and the aircraft may be able to fly, but only in one direction.

There are many situations, such as low voltage, GPS is not normal, etc., you make the situation clear.

Possible reasons are:

1. If the temperature of the battery itself is too high and the temperature is too high, the alarm will be eliminated by replacing the battery or unplugging one side;

2. Overcurrent or overvoltage may be caused by external access current and voltage, which is generally the same on both sides, and the elimination method and logic of over-temperature are different;

3. In addition, the charger motherboard is faulty and needs to be sent back for maintenance and testing.

Honors received by DJI drones:

On December 15, 2019, DJI was awarded the Top 10 Cutting-edge Brands of the Year at the 2019 China Brand Power Burning Shirt Sales Ceremony.

In June 2020, DJI.

Selected into the "2020 Forbes China's Most Innovative Enterprises List".

On July 22, 2020, it was ranked No. 1 in the "2020 Top 5 List of China's New Economy Unicorn Hardware Equipment" released by iiMedia Ranking.

On August 8, 2020, DJI drones were valued at 100 million yuan.

Ranked 107th in the list of the top 500 of the 2020 China Brand Festival Annual Conference.

October 2020, Hurun.

In the "2020 Hurun China Top 10 Consumer Electronics Companies", DJI ranked 5th with 100 billion yuan.

Drone. The red light of the remote control is always on, because there is no successful alignment, so this situation will occur, the remote control and the aircraft will display green after the frequency elimination of Wang into the sedan chair, you can turn off the aircraft and the remote control, restart the aircraft first, restart the remote control, try to link again, if the alignment is still unsuccessful, you can contact the manufacturer who purchased the drone Closed Bridge Brigade, if necessary, you can return to the factory for maintenance, I hope it will help you.

If the remote control keeps beeping and the indicator light flashes red, please follow the instructions below

1.Confirm whether the power of the remote control is insufficient, and the remote control battery indicator will alarm when there is only one bar left to flash (the battery level is below 10%), please charge the remote control in time;

3.If the aircraft is not connected, the remote control will alarm after turning on the remote controller for 5 minutes, which can be eliminated by dialing the joystick at will.

4.If the aircraft triggers obstacle recognition (premise: aircraft model with obstacle avoidance perception function), please combine the prompts on the APP interface to move the aircraft away from the obstacle, and the alarm will eliminate the seepage;

According to the aircraft status indicator, the yellow light flashes slowly, indicating that the aircraft has no GPS and no visual positioning. This state is not flight-free.

1. The battery grinding stove is out of power, and the lights of the aircraft and remote control are generally out of power.

2. According to the manual, see if you have set what mode.

3. The parts of the drone are damaged.

Workflow. 1) Start interface: quickly realize the planning of the task, enter the task monitoring interface, realize the rapid and automatic archiving of the aerial photography task, and divide the functions to realize the singleness and stability of the software operation.

2) Pre-flight inspection: In order to ensure the safety of the mission, it is automatically detected before take-off in combination with the flight control software to ensure that the GPS, compass, airspeed tube and pitch roll of the aircraft are in good condition, so as to avoid the occurrence of dangerous situations in aerial photography.

3) Flight mission planning: Flight mission planning is carried out in three modes: regional aerial illumination, navigation and hybrid.

4) Flight monitoring: real-time grasp of the aircraft's attitude, azimuth, airspeed, position, battery voltage, real-time wind speed and direction, mission time and other important states, so that the operator can judge the executability of the task in real time and further ensure the safety of the mission.

5) Image stitching: After the aerial photography task is completed, the navigation aerial images are used for image stitching in the study area.

Is it a short press + long press method to shut down?

If you look at it according to the aircraft status indicator.

The yellow light flashes slowly, indicating that the aircraft has no GPS and no visual positioning. This state is not flight-free.

After plugging in the battery, the yellow light flashes slowly, the indicator light on the center plate does not light up, and the remote control cannot be connected.

The DJI 6 mobile phone gimbal flashes red and green, and the first gear may be one of the following reasons:1The battery is low and needs to be recharged.

2.The gimbal is stuck in several celery and needs to be recalibrated. 3.

You can try to fix the problem by following these steps:1Check if the battery is sufficient, if it is low, it needs to be charged.

2.Recalibrate the gimbal and follow the steps on the instructions. 3.