How to reserve the distance between the toilet wall and what is the appropriate size of the toilet f

When you choose the toilet, you have to measure the size first, or it will be more troublesome to choose the installation at that time, you must know that you must measure its wall distance, these distances are determined when doing water and electricity.

When you choose a drain toilet, you must know the wall distance of your bathroom toilet, which is relatively simple, that is, the distance from the center of the toilet outlet on the ground to the wall. If you still don't know how to measure, generally speaking, like a new house is a better amount, most of the toilets in the old house are installed with toilets, and it is not so convenient to measure, at this time you can measure the drain on the roof of your house, and measure a rough data. Generally speaking, most of the wall spacing of drainage toilets is 305mm, 330mm, 400mm, 420mm, and more are 305mm and 400mm.

Here are some tips to tell you, when you buy the toilet wall distance is less than the actual wall distance of the bathroom, if your home measured out the wall distance is 415mm, then you only need to choose the wall distance is 400mm toilet when you choose, you have not deducted the thickness of the wall tiles when you measure, so that the size of the selected installation will be more beautiful, like the back of the toilet and the wall will not have some gaps, and it will not affect the aesthetics, let alone our use. If you choose a size larger than the actual size, then it will be more troublesome, and there will be a possibility that the installation will not be possible. But if you buy the actual wall distance between the toilet wall and the large bathroom, learn more about it and log in to Qijia.com (www So when you measure the size of this side, you must calculate the amount of tiling when calculating the wall distance, we all know that the toilet you choose now is using drainage, and you must pay attention to the details when choosing.

If you do not deduct the thickness of the tile, it will be difficult to install the toilet when you choose to come back, if you leave too much, the effect of the installation is not good.

This issue is addressed to.

The water tank of the split toilet is installed on the toilet, and the flush spout is aligned with the connecting screw hole. The gap between the water tank and the wall should be even, not more than 20mm.

Siamese toilets do not need to consider specifications such as the installation height of the water tank. Because the cistern and toilet seat of the one-piece toilet are one, you only need to choose the location where the toilet will be installed. Generally, with a water tank and a one-piece toilet, the back of the water tank should not be more than 20mm away from the wall.

The water-saving performance of the wall-mounted toilet is superior, and the concealed water tank is divided into two types: side press type and top press type due to the different position of the flush button. Taking the thickness of the decorative layer as xcm as an example, the height from the top of the side press water tank bracket to the bottom of the foot is 100cm+xcm, while the top of the bracket of the top press type water tank is 82cm+xcm from the bottom of the foot.

We all know that the location of the toilet in the bathroom needs to be against the wall, which requires a careful measurement of the distance between the front and back before the installation, many people have not paid attention to it before the installation, so it leads to the installation of the post, the distance between the wall is too large, and it is also very inconvenient, so I will give you a detailed introduction to the distance between the toilet and the wall left and right?

What is the distance between the toilet and the wall?

Toilet pit distance refers to the distance between the center of the toilet sewer pipe and the wall, generally 300mm, 350mm, 400mm, 450mm, 500mm, etc. Choosing the right toilet starts with choosing the right pit spacing.

1. The installation master said that there are many sizes of toilets off the wall, including 20 cm, 30 cm, 40 cm, etc., but the size of the toilet off the wall is mostly 30 cm and 40 cm, so when choosing a toilet, you need to pay attention to the size of your own toilet sewer pipe off the wall, so as to prevent it from being installed after buying it.

2. In addition, the toilet drain drainage method is divided into two types: lower row type and rear row type, the lower drainage mode refers to the distance size from the center of the ground sewer hole to the wall, there are two kinds of centimeters and 40 cm, and the rear row method refers to the size distance from the center of the drainage hole to the ground, generally 20 cm, the drainage method is different, and the size of the toilet sewer pipe off the wall is not the same.

3. After understanding the distance between the toilet sewer pipe and the wall, the installer also added: you need to pay attention to the size and material of the toilet sewer pipe. Now the home decoration toilet sewer pipe material is mainly divided into PVC and cast iron, the diameter of the toilet sewer pipe is 11 cm, of course, in order to drain smoothly, the diameter of the toilet drain pipe needs to be consistent with the sewer pipe, so that the toilet installation can not go wrong.

How to buy a toilet?

1. We must measure the diameter of the toilet outlet and the distance from the wall, so that we know in our hearts, and when buying a toilet, we must choose the one that is suitable for the size of the bathroom at home.

2. To the sanitary ware market, we must carefully observe the glaze water on the surface of the toilet, the quality of the glaze water directly affects the experience of using the toilet, the glaze water should be smooth and smooth, and the toilet bowl with good water is not easy to scale, and it is more worry-free in use.

3. There are two kinds of toilets, straight flush type and siphon type, each with different advantages and disadvantages, direct charging is more water-saving, but the sound is also loud when flushing, sometimes it is not easy to flush clean, and the siphon flush is clean and silent, but it is more water-consuming. You can choose according to your needs.

4. In addition to observing the appearance of the toilet, the internal hardware materials are also very important, especially the flushing facilities.

After reading the above details, I believe that everyone has a good understanding of what is the distance between the toilet and the wall? How to buy a toilet? I already have a detailed understanding, when the toilet is installed, if you don't grasp the gap before and after, you can find a professional installer to install, and at the same time, when purchasing, you can find a big brand toilet brand store, so that any problems that arise in the later stage can be solved, plus the toilet of the big brand store, the quality can also be ***.

Kiss, the distance between the toilet and the wall is 30 cm or 40 cm, but in the actual construction, the distance of 2 cm wall tiles must be left, so the distance between the center line of the sewer and the wall needs to be maintained 32 cm or 42 cm, and the specific should be decided according to the size of the toilet.

1. What is toilet pit distance?

Pit distance refers to the distance between the center of the toilet drain pipe and the wall, generally 300mm mm mm mm, etc. Choosing the right toilet starts with choosing the right pit spacing.

Second, what does the toilet pit distance mean.

According to the type of toilet room and personal preference, the toilet pit distance is the positioning size of the toilet drain (toilet drain). It is normal to choose a toilet with a pit distance of 300mm or 400mm. In actual operation, 20mm is reserved, and 20mm is the distance of the reserved wall tiles.

Then the actual distance from the center line of the toilet drain (diameter 110) to the wall is 320mm or 420mm 。The actual error is 10mm normal, and the premise is that it can be installed normally.

Third, the pit distance of 300 or 400 is better.

The toilet pit distance is the distance from the center point of the toilet sewer reserved on the ground to the wall, and this distance can be measured to determine how much hole spacing (that is, the pit spacing you said) to install the toilet. The pit spacing is 400mm, you install the pit spacing toilet, and there is a 100mm gap between the toilet tank and the wall. On the contrary, if you install a 400mm pit spacing toilet, the toilet drain hole does not match the sewer and cannot be installed.

Therefore, the pit distance of the toilet does not say which is better, only the bathroom should be measured in advance.

The hole spacing of the ground, and then decide how big the pit spacing toilet to buy.

According to the national "Residential Toilet Function and Size Series" specification requirements, the total width of the toilet space shall not be less than 85 cm. This is the minimum space requirement, and the width of the toilet bowl itself, although similar, is also different.

Subtracting the width of the toilet itself from 85 cm is the sum of the minimum distances between the two sides of the toilet. Of course, if you can only use the toilet with the smallest space, the use feeling is very uncomfortable and will make people feel very cramped.

The minimum space on both sides of the toilet is 20 cm on each side, which is the smallest space to use, and the more comfortable size is between 24-28 cm.

The center of the toilet is generally about 70 cm long to both sides, depending on how big the water distance is and how much distance there is in front of the toilet to determine the width of the bathroom cabinet.

As a rule (if the water distance is enough to hold the toilet against the wall), the length of the toilet bowl is 70 cm, plus 40 cm of walking space, and the rest is the width of the bathroom cabinet. At your size, you won't fit a bathroom cabinet on the opposite side of the toilet.

It is too laborious to assemble and connect the inlet hose, and if the hose or inlet float is damaged and replaced, the toilet may have to be removed before it can be operated. The toilet is too close to the wall, when it is convenient, the human body has to touch the cold wall, it is okay in summer, and when you sit in winter, you can feel the ambient temperature of your body and run away all of a sudden....Just ask if you are trembling! Therefore, when designing the toilet drain pipe, let the sewage outlet be 50 cm away from the wall; When installing the toilet, depending on the part of the sewage outlet, plug one leak, and use the other to make the toilet hole spacing relative and the distance from the wall more appropriate.

After the assembly, there was a gap from the wall, and then we removed it again, and only after measuring it did we find that the distance between the side plate of the water storage tank and the center of the drainage hole was 290mm! Their installation instructions confirm that it is 310mm!

The hole diameter is 90mm! There is also a 10-5mm spacing between the bottom of the hole and the base plan! 305 or 310 is highly recommended spacing, and the national standard has no error limit on this matter!

Considering that the vertical error of the wall is directly affected by the error of masonry wall, batch putty, wall tile adhesive processing technology and the verticality deviation of floor tile parquet, the top of the sewer pipe shall not be less than 20mm from the finished surface of the floor tile after the end of the floor tile, the center of the sewer pipe from the finished surface of the wall tile is proposed to be 300mm, and the distance between the reverse side of the water storage tank and the wall is less than 15mm.

In fact, the hole of the toilet is the size of the toilet, which refers to the distance between the core of the sewage outlet and the wall, and the actual size of the wall with the wall tiles. The size of the toilet without tiles can not be applied in practice, and the thickness of the tiles should be reduced before it can be used as the basis for purchasing the seat side. The key specifications of toilet hole spacing are 300mm, 350mm, 400mm, and 450mm, which can be suitable for a variety of toilet applications with a variety of total areas, and you can purchase them according to the actual situation.

Specifications for the upper hole position and matters that must be paid attention to when assembling.

If you are worried about the water storage tank shaking, you can use a small piece of wood or other items to top it between the surface of the water storage tank and the wall tile, and fix the small wood with structural adhesive. This involves an appearance problem of interior decoration design, the pipe of the toilet has a greater direct impact on the beauty and generosity of the room, because it is all houses at present, the roof of the road can not be moved, so there are very few dark water pipes, generally go to the open pipe, the toilet flush valve should be stable behind 2-4 water pipes, and the space behind it will endanger the beautiful and generous interior space behind, so it is generally selected to stick to the wall.

The minimum total width of the toilet must not be less than 850 mm, and the width of the toilet itself minus the width of the toilet itself is the minimum distance between the two sides. Depending on the size of the toilet, the user can flexibly calculate the required distance. If it is a smaller bathroom, the distance between the side of the toilet and the wall should be at least 15cm, so that it will not be too oppressive and the space will be too narrow, and the lighting can also be reasonably illuminated.

It is normal to choose a toilet with a pit distance of 300mm or 400mm.

It is appropriate to reserve about 15 sizes for the distance from the toilet to the wall, and about 10 sizes for the distance between the toilets.

When decorating, the toilet is generally 32 to 42 cm away from the wall, and the toilet pit should be slightly farther away from the wall. This will be convenient when using it.

Hello, normally 20 cm to 50 cm away from the wall will be more appropriate, affected by the drainage method and the toilet pit distance is different, "There is no fixed size for the distance between the toilet and the wall, and it is better to keep a distance of 40 cm between the side of the toilet and the wall, so that it will not be too crowded on the toilet." If the bathroom space is relatively small, the distance from the wall can be reduced, but try not to be less than 15cm. If it is a smart toilet, the toilet should be kept 35cm away from the wall. ”

Hello, the general distance from the wall needs to be determined according to different toilet models and installation methods. Here are some common toilet reservations from the wall:1

Ordinary toilet: Generally, it is necessary to reserve a distance of 15-20 cm for the installation of the water tank and connecting pipe. 2.

3.Floor toilet bowl: This type of toilet usually requires less space, generally 10-15 cm space.

It should be noted that the distance reserved for the toilet should not be too small or too large, too small will affect the installation and use of the model, too large will waste space. It is advisable to carefully measure the reserved space before purchasing a toilet to ensure a smooth installation.