What should I do if the iPhone falls into the water and there is no sound from the earpiece

Try the following methods to solve the problem: Restart your phone and see if there is any sound. Take a clean cotton swab and wipe it and try it out on the phone jack.

Use the headset access interface, turn on the **** device to listen**, then press pause, return to the home page, turn off, pull out the headphones, and then turn on, it can be solved, if you don't succeed in trying a few more times, it still doesn't work, long press the power home for a hard restart, and then when the white apple appears, pull out the headphones. If it still can't be solved, it is recommended to go to the after-sales outlets of the Apple mobile phone for testing, repair or replacement of accessories.

After the mobile phone accidentally enters the water, it is recommended to operate according to the following methods: 1. First of all, the mobile phone should be salvaged as soon as possible, and if the battery can be removed, the battery should be removed immediately to prevent short circuit; At the same time, it is better to remove the SIM card so as not to lose the contact information. The longer it stays in liquids, the more damage your phone will suffer for life.

2. If the phone falls into salt water, not fresh water. Salt water forms a "salt crust" in the phone's internals. If your phone has fallen into seawater or other salty water, you need to rinse it gently with fresh water – after removing the battery and SIM card, and before the drying process begins.

4. Wipe every part of the phone with a cloth or paper towel, and don't move or shake the phone too much to avoid water swimming everywhere inside the phone. 5. Try wrapping your phone in a cloth or paper towel for a few minutes to absorb excess moisture. Turn on the cool air setting of the hair dryer and blow at the hole of the mobile phone about 30cm away from the mobile phone for at least one hour.

6. Finally, wrap the phone in a paper towel and put it in a jar or bag full of rice for at least 24 hours, during which time it cannot be turned on. Rice absorbs water very well and can save a damp phone. 7. The above is only a salvage measure, if there is still a failure, please go to the after-sales maintenance.

If the mobile phone earpiece is flooded and there is no sound, you can use a hair dryer to see if it works, and if it doesn't work, you can only disassemble and repair it.

There is no sound after the mobile phone earpiece enters the water, there may be a short circuit failure, it is recommended to go to the mobile phone repair shop to find a repair master to test the specific situation of the mobile phone, I hope to help you, I wish you a happy life!

Turn off your phone first, then use a hair dryer to dry it. Or put your phone in the rice, the rice has a certain absorbency, and the phone will be ready to use after a day.

If you can't use it to repair it in a repair shop to see if it can be used, it has a certain relationship with the amount of water ingress.

1. Wipe your phone dry.

Remove your phone from the water, quickly dry the water on the surface of your phone, and remember not to try to turn it on.

2. Shake the water out.

Shake off the water in your phone, and don't try to turn it on. As long as the phone is flooded, you should wait at least 24 hours if you want to turn it on. Here what we have to do is to deal with the water stains that remain in the phone.

These water stains are usually left inside the phone, and if you try to turn it on, there is still a risk of burning the motherboard.

3. Use a hair dryer to blow your phone.

When blowing the mobile phone, you must pay attention to the distance between the hair dryer outlet and the mobile phone, so that the wind temperature blowing on the mobile phone is close to the normal temperature. Remember not to blow the air vent of the hair dryer directly on the phone, too high a temperature is absolutely not good for the phone.

After the mobile phone enters the water, it is also necessary to see if it is serious or not, if there is no impact, it can be placed to dry, if there is a problem, you need to find a repair point to deal with it, and the general individual is not good at repairing, because the mobile phone needs to be disassembled.

What should I do if my iPhone earpiece gets into water? No hands-free, use it to drain with one click!

1.Do not try to turn on the device immediately if there is water ingress. Because the iPhone has a built-in battery that cannot be removed, the motherboard will be short-circuited if it gets into the water, and if it is turned on, the motherboard will be burned, causing irreparable consequences.

2.You can first use toilet paper to dry the water outside the mobile phone, and then place the mobile phone screen horizontally to prevent water from flowing to the motherboard, and then use a blow dryer to dry the water, and turn on the temperature at medium or small temperatures.

3.Wipe down the circuit board with anhydrous alcohol and try to turn it on. Because alcohol volatilizes quickly, the moisture on the circuit board can be volatilized clean.

4.Send it to a repair center for repair as soon as possible. If the motherboard is severely corroded over time, it will cause irreparable consequences.

It should be that the earpiece or the parts of the tube earpiece are short-circuited and burned, and it is best to go to the mobile phone store for testing and repair.

Use a hair dryer to blow the earpiece at intervals between cold and hot, and it will be normal when the temperature is cold.

Don't try the following wrong methods after your phone gets into water.

1.Don't shake your phone too hard. Because under the constant shaking, the liquid will swim inside the machine, and the moisture may enter deeper and burn the internal chip of the machine.

2.Don't use the hot air of a hair dryer to dry your phone for a long time. iPhones are now all metal bodies, and metal conducts heat easily, which will blow off the solder joints of the motherboard inside the machine, causing the motherboard to malfunction.

3.Do not attempt to charge a phone that has been flooded. An iPhone that gets into the water may have water stains inside, which can burn out the motherboard when it is powered on and cause a more serious failure.

It is recommended to send the mobile phone to a regular repair center for testing to avoid unnecessary damage to the mobile phone.

1. Brush the metal mesh on the earpiece with a clean fine-bristled toothbrush, and after brushing it a few times, it is basically normal.

2. If the beam is not dry, wrap it around with a small vacuum cleaner or hair dryer, or roll it over to suck it and dry it.

3. Serious water ingress into the mobile phone is not only the failure of the earpiece, but also causes the components in the mobile phone to short circuit when exposed to water, if it is a corrosive liquid such as acid and alkali, it will corrode the components of the motherboard, or have a chemical reaction with the motherboard, affecting the normal use. It is recommended that you send your phone to Apple's official repair point for professional testing and repair in time!