Enquire Can you bathe with water from underfloor heating? What are the disadvantages or benefits? 1

I recommend or not to use it for bathing and drinking, why? Because no matter how clean your water source is, the water pipe will produce scale after long-term operation, once the scale is more, it will affect the heating effect, so the pipe must be cleaned, and the pipe is used to clean things such as chemicals, which must be harmful to the human body. So still do not use it for bathing and drinking.

First, this water is circulating water, which stays in the pipeline for a long time, and at the same time absorbs various free heavy metal molecules and harmful substances in the pipeline, which is not domestic water in itself.

Second, this water is enclosed in the pipe, and it is estimated that only water is added for a year and a half, and it is rare to see the replacement of water, so it is estimated that it is also dirty, and there will be more or less rust inside.

It is not recommended to use this water for domestic water, wash your face and feet, and secondly, if you wash clothes, dark clothes will become dirty, and light-colored clothes will also absorb a large amount of heavy metals and fade and be rough because of the excessive heavy metal content in the moisture. In particular, cotton fabrics are more likely to retain heavy metal components, which is harmful to health.

It is not recommended to use it, and the normal domestic water is quickly replaced, and the retention time in the pipeline is very short, so it is more environmentally friendly.

It is best not to take a bath in floor heating water because it is very alkaline and often take a bath in floor heating water ** It will be very dry But wash the sheets The work clothes are very good and the mud is washed quickly.

It is better not to use it, if it is a multi-directional circulation, the water of the floor heating pipe is not very clean, and there is no benefit. If you have any other questions, please feel free to consult with us.

It's better not to use it, in some places, something will be added to the water, you can install a heat exchanger, even if the solar tube is frozen, you can also have hot water for bathing, and it doesn't cost electricity.

My home is also plumbing, maybe I am a bit of a cleanliness fetish, I always feel that the water that has been circulated by floor heating has dirt, and it is not clean with direct tap water, and I never use ground heating water.

What do you smell??? In some places, there are many things added to the heating water, which are damaged by **.

The water used for floor heating is tap water and can be used to wash hands and feet. zhi

Floor heating is to use the whole ground as a heat dissipator, evenly heat the whole ground through the heat medium in the radiant layer of the floor, and heat the room through the heat transfer mode of radiation and convection through the ground to achieve the purpose of comfortable heating. According to different heat transfer media, it is divided into two categories: water floor heating and electric floor heating, and according to different pavement structures, it is mainly divided into dry floor heating and wet floor heating.

No! I put a few basins of water in my hands, soaked my hands for a while, and I washed my hands with hot water, and it felt corrosive.

Hello, the water in the plumbing can be used, because they are all tap water. If the water in the plumbing is recycled for a long time, then you should not wash your hands and feet, and the water quality will change essentially. Thank you.

It's tap water, or some people have water purification equipment, and if it's treated separately at home, that water.

Generally not available, because the floor heating is a closed cycle, so that every few years to replenish the water, can be reduced, the floor heating pipe scaling, and there is no need to use, now the general boiler is a dual-purpose furnace, can be used for floor heating, can be used for domestic hot water, two in the boiler is independent of two systems.

The water used in the heating system is generally industrial soft water, and it is also used to remove oxygen

Running water. Essential.

version is non-toxic. However, in some areas, heating users often secretly release hot water, and the heating company has to add some chemicals to the heating water in order to ensure that the pressure is normal, and there are all kinds of things, which are generally slightly toxic.

If not used, the water can be discharged privately and used for other purposes.

The pipes are flushed and ready to use, and they are all tap water.

You can wash your hands and feet, and you don't have to take a bath!

Underfloor heating water and domestic water are separated, in two different circuits.

If BAI uses the wall-hung boiler installed by itself as a heat source to boil DU water, the water used is tap water, and DAO is basically non-toxic.

This kind of wall-hung boiler is generally used for domestic water supply and heating water supply, and there is a special road for domestic water supply, so there is no need to take floor heating water for other purposes.

If it is a wall-hung boiler with single heating, the hot water in it can be used for other purposes.

If the hot water is provided by the heating company, the hot water will pass through the public pipes before entering every house, and if the pipes are not cleaned for a long time, there will be a lot of impurities, and the water will be very dirty, and it is best not to use these hot water for other places for safety reasons.

The water in the underfloor heating can be used sooner or later. The reason is to ensure the safety of boilers and heating systems.

Operation, the heating department adds anti-corrosion and anti-scale softening water treatment agents to the system water to remove the rust in the boiler and prevent the boiler and heating system from clogging and bursting. This type of agent is highly corrosive due to the alkaline substances contained in its composition. Once the human body comes into contact with the code finch, it will also produce strong corrosion, which will damage the human body and be harmful to health.

Water in underfloor heating cannot be used. The reason is that in order to ensure the safe operation of the boiler and heating system, the heating department adds anti-corrosion and anti-scale softening water treatment agents to the system water to remove the rust in the boiler and prevent the boiler and heating system from clogging and bursting. This type of agent is highly corrosive due to the alkaline substances contained in its composition.

Once the human body is in contact, it will also produce strong corrosion, which will damage the human body and be harmful to health. Payson.

Water underfloor heating is not harmful to the human body, this is a rumor.

Since floor heating does not pose any threat to the human body, why do some people feel unwell after installing floor heating, and the indoor formaldehyde is seriously exceeded? Actually, this is the reason for the floor.

The geothermal flooring in many homes is wood, and in order to be waterproof and mothproof, the wood floor needs to be reworked, and adhesives are used in this process.

The adhesive contains a large amount of formaldehyde, which is the main culprit of indoor pollution.

Introduce. To create a healthy and environmentally friendly indoor space, we must be cautious in the selection of furniture and flooring, and try to choose some high-quality and low-toxic substances.

Also, when it comes to heating, don't go too far for high temperatures. The temperature is too high, and the difference between it and the outdoors is too high, which can easily cause colds. It is recommended to form the habit of opening the windows regularly for ventilation during the heating period, within 20-30 minutes each time.

The water for underfloor heating has nothing to do with household water, the water for underfloor heating is industrial water, not tap water, and the water in the water heating boiler and heating is both.

It is demineralized water that has been chemically treated by Huai Sullen Bureau over the cover rock.

This softened water must not be used for drinking or bathing, and in order to prevent scale and rust, a large number of chemicals are added to the water in the heating department, and the water is in a closed cycle for a long time, breeding a large number of harmful germs.

Floor heating water and domestic water are two systems that are completely separated, each with its own inlet and return water pipelines, so there is no need to worry about the water in the floor heating pipe not being emptied for a long time will affect the quality of domestic water. In the actual use process, according to the different water quality in various places, the floor heating pipe will generally be cleaned once in about two heating seasons, so as to ensure the normal operation of the floor heating system and maintain the heating effect, and the process of cleaning the floor heating pipe is a good time for floor heating to change water.

If it is electric underfloor heating, it may have some effect. If it is water, the floor heating has no effect on the pipe, and it may have some impact on the insulation board. But it will take a long, long, long time for this effect to be felt.

The floor heating pipeline itself is not afraid of water, and large-scale water immersion mainly affects the wooden floor and wall water absorption, which may lead to damage or even scrapping of the floor, and the wall water absorption will lead to grassroots putty.

Bulging and falling off.

What to do if the floor heating is blistered?

1. Determine the amount of soaking water first, if the amount of soaking water is not large, open floor heating and open windows for ventilation. Allow to dry naturally;

2. If it is electric geothermal, please cut off the power supply first, disassemble the floor from the long side, and put the removed floor in a tic-tac-toe shape, and the moisture content of the ground and wooden floor.

It can be reinstalled before it reaches the level of soaking in water;

3. If it is water floor heating, the water temperature is now lowered, and the water temperature is adjusted to 55 degrees Celsius after the floor is disassembled.

Left and right, dry the ground, if the ground can't be dried, you can lay a film on the floor heating, the water will think of water droplets on the film, and then take the mulch film away, and then spread it back to the floor.

The floor heating floor is soaked in water. There will be no impact on the use of underfloor heating.