How to open a window on the wall saves effort

Please check whether the load-bearing wall, if the non-load-bearing wall: 1 first open the strip hole on the highest point of the planned window The height is 200mm (depending on the width of the window, the wider the window, the higher the opening) The width of the hole is: the design window width + more than 200mm on both sides.

2.The opening is reinforced (steel structure beams or reinforcement frames can be selected to add concrete, and the top is filled with full, because of the selection of expanded concrete).

3.After reinforcing the strength on the beam, the water turns the hole at the position where the window needs to be opened.

How do you open a window in the wall of the room? How are the holes in the walls? Straight on?

It still takes skill, prepare the windows, lintels (strong enough and 200 mm larger than each side of the window). Draw a window on the wall and start chiseling the upper part of the window according to the size of the lintel. When kicking off the thickness of 1 2, you can temporarily put in the lintel.

Then remove the other half, press the lintel and fix it after it is clear. Start from the middle of the lintel to the sides and lower part and put it into the whole window. Build window sills and wipe windows.

Please check whether the load-bearing wall is: 1 First open the strip hole on the highest point of the planned window The height is 200mm (depending on the width of the window, the wider the window, the higher the opening) The width of the hole is: the design window width + more than 200mm on both sides.

2.The hole is reinforced (optional steel structure beam or reinforcement frame plus concrete, the top is filled with full due to the selection).

3.After reinforcing the strength on the beam, the water turns the hole at the position where the window needs to be opened.

The skill of opening a window on the wall, some people's rooms are without windows, there are advantages and disadvantages of opening windows on the wall, if you don't need to open a window on the wall, then don't open it, the best for your own home! Here are tips for opening a window in the wall.

1. When the concrete wall needs to be opened, the type of wall should be evaluated first. If the wall is load-bearing, then the wall cannot be changed, otherwise it may affect the stability of the whole building.

2. If it is not a load-bearing wall, then the window can be designed to open the window without affecting the safety of the building. The specific fenestration method is as follows:

3. Draw the shape of the window on the wall first.

4. Use a percussion drill to drill a long gap above the window, which should be 20 cm longer than the wide side of the window.

5. Put the cement strip into the gap above.

6. Then use a percussion drill to drill out the drawn shape and untie it.

<> can first draw along the dimensions of the window on the wall, then use a tool to pierce along the painted area, and finally push out the middle part after all the oak holes around it have been pierced. In the decoration process, sometimes you want to open a window in the shed where you need it, then you can first determine the position and size according to the size of the window you want on the wall of the window to be opened, and then use the impact drill to break through the wall little by little around the scope of the drawing, and after ensuring that the surrounding area is completely penetrated, use tools such as a hammer to push out the middle part, so that the prototype of the window is there, and then you can use cement to smooth the surrounding of the window.

In daily life, many people don't know anything about decoration, but saving money is a little common sense that everyone needs to master, if you have a lot of research on design, want to transform your house to look better, want to open windows on the wall is not worried about the trouble? This requires professionals to investigate whether the chain car can open the window.

There will be a little trouble, because some walls are load-bearing walls, if you open the windows at will, it will affect the load-bearing performance of the house and cause safety problems, before opening the window, you should first calculate the wall and determine the position and size of the window, then draw the appropriate size window at the location of the window, and then use a percussion drill to drill a long slit above the window, and then move to the other three sides according to the shape of the window. Finally, the cement profile is placed into the gap and the wall stack is pushed out.

The most important thing in opening windows on the wall is the labor cost, just chisel the wall for half a day, and paint the surrounding area with cement mortar, it can also be said that it takes a day of man-hours, if you want to paste tiles next to it, you also need to calculate it separately; So even if the windows are 200 yuan, you need to buy some materials, and this calculation will cost at least 500.

1.Determine the location and size of the window.

2.Draw an appropriately sized window at the opening location.

3.Use a percussion drill to drill a long slit above the window, which needs to be 20 cm longer than the width of the window, and cut the wall according to the shape of the window.

4.Place the cement profile in the gap between the top and the surroundings, and then push out the wall stack of drilled holes, please note that when opening a window on a concrete wall, if the wall is a load-bearing wall, the opening of the window requires a professional to operate.

To open a window in a wall, first determine whether it is a load-bearing wall.

If it is a load-bearing wall, there must be reinforcement measures (as shown below), and the reinforcement plan must be approved by the builder and the designer before construction.

In the case of non-load-bearing walls, simply insert a cement or steel lintel before the longitudinal opening.

You can use an impact hammer and a cutting machine to open the door first, and then manually knock down the brick wall.

Punch holes in the wall, as many windows as you want, this decoration will be done, what do you care, you just say your requirements.

It depends on what kind of wall it is, and if you want to divide the wall, you can find a master who smashes the wall and tell him what you think.