How do I attach a tile baseboard? Find out how to do it

The quickest way to paste the tile baseboard, the operation is very simple, and the paste is durable and does not fall off.

Tile baseboard construction process.

1. Construction preparation.

1) Before construction, the wall should be carefully cleaned and watered one day in advance.

2) According to the required quantity, one end of the skirting board at the yang corner is cut into 45 degrees with a toothless saw, and the skirting board is washed with water, and dried in the shade for later use.

3) When the inlay is installed, try to paste it from the sunny corner to both sides, check whether it is straight, whether the gap is tight, whether there are defects such as missing edges and corners, and can be pasted only after passing the test.

4) no matter what method is taken, first at both ends of the wall first inlaid a baseboard, its upper edge height should be on the same horizontal line, out of the wall thickness to be consistent, and then on the two baseboards along the pull through line, block by block in order to install.

2. Construction methods.

1) Paste method. According to the wall reinforcement and the standard horizontal line, with 1:2 cement mortar plaster, and scrape the scratch, after the bottom mortar is dry and hard, the tile skirting board that has been moistened and dried is smeared with 2 3mm plain cement slurry for pasting, and the rubber hammer is smoothed, and pay attention to the level, the ruler board is leveled and straightened at any time.

The next day, the joints are rubbed with cement paste of the same color as the floor panel.

2) Grouting method. It is to temporarily fix the baseboard in the installation position, use plaster to stabilize the two adjacent baseboards and the baseboard with the ground and wall, and then grout with 1:2 cement mortar (volume ratio) with a consistency of 10 15cm.

And wipe the spilled mortar clean at any time. After the cement mortar to be poured into the final setting, then the gypsum is shoveled off and wiped clean, and the joints are wiped with the cement slurry of the same color as the board surface.

As the name suggests, tile baseboards are new products installed in some corners, especially in the corners of the wall, on the one hand, they are often made of materials with the texture of ceramic, and on the other hand, they are relatively more prominent than the thickness of the wall, which can play a protective effect. In order to prevent us from sometimes leaving marks on the walls and tiles due to negligence, in addition, the specific installation and construction methods of the wall baseboard can be selected to understand a lot, you can refer to the above to learn.

First, what glue is used for tile baseboards

If you don't want to paste with cement mortar, you can also use a special tile adhesive, or use AB dry hanging glue. However, marble glue and glass glue are limited by the material, have poor durability and are easy to fall off.

Second, how to paste the tile baseboard

1. Drilling. Use special tools to drill holes in the wall, and observe whether there are water and electricity lines in the wall before drilling to prevent mistakes. The common length of the baseboard is 2m, in order to fix the baseboard more firmly, the interval of the drilled holes should be about 40cm, and the interval at the interface should be smaller.

After drilling the hole, nail the small wooden strip into the hole. The nails that hold the baseboard are nailed to this wooden strip, and the reason why they are not directly nailed to the wall is mainly to prevent the nails from loosening. Since the pipe of the hydropower project is buried in the wall, the position of the pipe is directly below the switch socket, and the position should be calculated when punching the hole to avoid damage.

2. Fixed. Before fixing the baseboard, the wall should be cleaned and cleaned, otherwise after the baseboard is installed, it will not be completely attached to the wall, and it will leave unsightly gaps. Look for the position of the drilled hole and secure the nail to the baseboard.

When fixing, pay attention to whether the baseboard is close to the wall, and the nail should be completely driven into the hole to avoid affecting the effect.

3. Corner treatment.

At the corners of the wall, where the baseboards intersect, the edges of the baseboards should be cut at a 45-degree angle, so that the interface will not leave unsightly marks. The baseboard in the corner of the wall must be cut at a 45-degree angle before it can be spliced and installed, otherwise it will affect the appearance.

4. Installation points.

The nails that fix the baseboard should be specially threaded nails, which have a better fixing effect and are not easy to loosen. In order to make the ground more aesthetically pleasing, the edges where the baseboards intersect should be scraped with a planer. And make sure that the baseboard is completely close to the wall, leaving no gaps, especially in the corners.

The flatness of the wall should be tested before installation.

If you want to achieve the effect of both aesthetics and protection in the later stage, there are many places that need to be paid attention to, including the selection of suitable and reliable materials and some glue tool products, etc., and include the manuscript to learn the appropriate installation and treatment methods, such as entrusting a professional organization to deal with it, these are more critical, then the above is about whether to use glue in the installation process of ceramic tile baseboard and the specific paste methods and skills are popularized.

You can get it for free

Similar color matching method. The color of the baseboard is the same or close to the color of the floor tiles, and the light-colored baseboard is selected for the light-colored floor tiles. The effect of matching with the similar method is more unique, concise, of course, it does not obtrusion the color of the baseboard, and it will not show its own floor tile color too much, which is suitable for the vast majority of customers.

Color matching gap method. The gap method is to choose the color that is completely opposite to the color of the wood floor, use the contrast in the middle of the tone to produce the gap effect, and match the gap color, if the color is selected properly, it can generally produce unexpected effects, but this method must have a very good understanding of the color and its residential decoration style, in order to match the appropriate gap color, otherwise it will cause violations.

Some home renovation colors are planned to be planned. There can be no more than three colors in the interior space, and the best color matching for home furniture is: shallow walls, destinations, and deep furniture.

Golden yellow and silvery white can be combined with all kinds of colors, golden yellow does not contain pale yellow, and silver white does not contain gray white. Fourth, if the area is not enclosed, the same color must be matched; Different types of confined spaces can be matched with different types of colors. If you want to create a light and modern home furniture atmosphere, you must not choose these printed items, and try to choose a solid color design scheme.

Dark green wood flooring should be used carefully. Restaurant kitchens should not be made of warm colors, other than warm colors.

How to stick the baseline? Paste method: according to the wall reinforcement and standard straight line, use 1:

2. Mix the mortar to plaster the bottom plaster, and smooth the scratches, after the lower cement mortar is dry, the baseboard of the floor tiles that has been damp and dried is coated with 2 3mm plastering mortar to carry out pasting, and use a rubber hammer to level and straighten the ground anytime and anywhere. The next day, the concrete paint slurry of the same color as the ground control panel was replaced.

Grouting method: It is to temporarily fix the baseboard in the installation method, use plaster to stabilize the adjacent two baseboards and their baseboards with the ground and walls, and use a 1:2 mixed mortar (volume ratio) with a mortar consistency of 10 15cm to grout.

And clean the outflow of cement mortar in time. After the mixed mortar to be poured into the final setting, then the plaster is shoveled off and wiped clean, and the joints are wiped with cement mortar of the same color as the surface.

When the tile baseboard is pasted, the wall is treated first, and then the cement mortar is used for plastering, and then the plain cement can be pasted after the mortar is dry; I think that when matching the color of the tile base, try to choose one color or choose other colors of the same color.

If you want to put tile baseboards in your home, you must make some preparations a day in advance, such as moistening the walls with water. Then we need to rinse the baseboard in water and then dry it in a cool place. Then the second step is to start drilling, which must be found in advance, for example, we need to determine the location of the hole according to the location of the water and electricity pipes.

Then we need to make a horizontal line on the wall, and we need to work according to this horizontal line when applying the tile baseboard.

Tile baseboard color matching method:

1. Choose the color of the baseboard according to the color of the door sleeve line. The main feature of this method is that it allows the whole room to have a consistent color tone. The color of the door cover line is the same or close to the color of the door, and the color of the door is the main color of a room.

I highly recommend this method. You can also consult with the designer, but generally they think about the overall style. It is worth mentioning that the width of the baseboard is also particular, and the baseboard should be selected according to the height of the entire room.

2. According to the color of the floor or floor tile, the color of the baseboard should be close to the color of the floor and slightly darker than the color of the floor. In this way, the effect displayed is more beautiful and generous. This method is suitable for most users.

There are also a selection of colors that are completely different from the flooring, and sometimes there are unexpected effects.

The tile baseboard should be installed according to the tile alignment, the color of the tile baseboard should be consistent with the overall floor, and attention should be paid to a reasonable match.