How to fold a dinosaur, how should a dinosaur be folded

Hello, landlord:

There are many dinosaur origami tutorials that are relatively difficult, which is really challenging for friends who like dinosaurs and want to complete the production in a simple way. This simple handmade origami dinosaur tutorial in this changes that as he makes it very simple based on the creation of a thousand paper cranes. You only need to go through an easy and simple folding to get a handmade origami dinosaur based on a Tyrannosaurus rex, and if you like, pick up the paper you have on hand and try it now.

2.Then according to the creases, it is made into a basic square origami structure, and the specific folding method can be referred to: basic origami square.

3.Then fold the left and right corners of the front and back squares towards the crease in the middle.

4.Then pull the two bottom corners of the front and back of the origami model upwards, respectively.

5.Once flattened, turn the top corner of the front face upwards ...... down

7.Fold the triangular structure on the left side of the origami model as shown in the figure.

8.Then the left corner is folded to the upper right, and this folding is often used to make beautiful petals in the making of origami flowers.

9.Then fold the tip of the horn that has been folded to the top and fold it forward, so that you can already see the head of an origami dinosaur.

11.Then, the two corners of the handmade origami dinosaur folded down are folded out into two creases as shown in the figure, the purpose is to facilitate a special inward folding later, forming the foot of the handmade origami dinosaur.

12.At this time, the feet of this handmade origami dinosaur are pressed inward respectively, so that the feet of the handmade origami dinosaur are made.

13.You can see that the production of this handmade origami dinosaur is still very simple and interesting, and finally after a simple shape, it is the style under the American knife shown in the picture. You can also choose the paper of your favorite color, so that the handmade origami dinosaur may be more beautiful, and you can try everything yourself!

The flying dragon of the dinosaur origami series can be completed with a piece of paper, which is easy to learn and beautiful.

Hand in hand with you to do crafts.

The fold of the dinosaur is as follows:Material preparation: square origami, black pen.

Operation steps: 1. Prepare a square of origami paper, fold it into a rice shape and then split the dough guess, and close it inward along the middle line to form a square.

2. The two sides are folded towards the midline.

3. After opening the folded part, fold it upwards along the crease.

4. Fold backwards to the back, with a cross point at the left and right folds above.

5. Fold in half along the crease, as shown below.

6. Fold the part out of the head.

7. Fold down the feet.

8. Finally, draw the eyes, and a dinosaur is folded.

The above are the operation steps of the dinosaur folding method.

Fold dinosaur technology or Chang application:1. Dinosaur folding technology can be used not only for dinosaur models, but also for other models, such as animal models, plant models, etc. In addition, the dinosaur folding technique can also be used to make toys, decorations, etc., which can make the model more beautiful and portable.

2. Dinosaur folding technology can also be used in education, for example, in schools, students can use dinosaur folding technology to make models, so as to better understand the structure and appearance of dinosaurs, so as to better learn the knowledge of dinosaurs.

There are many ways to fold a dinosaur, such as:

1. Start with a square paper and fold the paper diagonally and in the middle line;

2. Make it into a basic quadrilateral origami structure according to the creases;

3. Then turn one end of the quadrilateral segment with the opening facing downward, and then fold the left and right corners of the two quadrilaterals on the front and back to the crease in the middle respectively;

4. Pull the two bottom corners of the front and back of the origami model upwards respectively;

5. After the flattening is flattened, fold the top corner facing upwards downward;

6. Fold the left and right side angles of the quadrilateral of the previous step together in half;

7. Fold the triangular structure on the left side of the origami model into an oblique crease;

8. Fold the left corner to the upper right, and then fold the tip of the upper corner forward to make the head shape of an origami dinosaur;

9. Fold the front and back corners of the front and back of the folded to the right rear of the origami model downwards respectively;

10. Fold the two corners of the handmade origami dinosaur folded down to create two creases;

11.The feet of the handmade origami dinosaur were pressed inwards separately;

12.Finally, after a simple shape, an origami dinosaur is made.

The steps to fold a dinosaur with paper are as follows:Materials required: A4 paper, scissors.

1. A piece of A4 paper or a rectangular paper cut in the same proportion. Mausoleum Universiade.

2. Fold it in half and open it, and then align and fold both sides towards the middle crease.

<>4. Fold the triangle on top of the origami down.

<>6. Fold the corners of the triangle in half again along the dotted line.

<>8. Turn it to the back and fold along the dotted line.

9. Fold the origami in half along the midline and pull out the dinosaur's 4 legs.

10. Fold the 4 legs of the dinosaur into the inside along the creases.

<>12. Fold out the head and feet of the dinosaur, and finally draw its eyes, and the dinosaur is finished.

Dinosaur folding:

Friends who like origami, today I will bring you a movie protagonist, oh, friends who have seen Jurassic Park must be impressed by the protagonist dinosaur in it, today I will teach you how to make a fierce dinosaur with an ordinary piece of paper.

First of all, find a square piece of paper, here I use ordinary white paper, because this way everyone can see clearly, in fact, colored paper is also a good choice. Fold the paper according to the rice character to make traces, this is very simple, not much to say:

The early stage is very simple, just pay attention to the positive and negative directions.

Operate in the order shown in the following figure, the diagram is clearly identified, as long as you look at it carefully, it is very simple.

Fold in half from the middle.

Dinosaur (English name: dinosaur) refers to the most recent common ancestor of Triceratops, modern birds, and Diplodocus and all their descendants.

To facilitate research, dinosaurs can be divided into avian and non-avian dinosaurs. Among them, non-avian dinosaurs only lived in the Mesozoic Era (Triassic, Jurassic and Cretaceous) and became extinct 65 million years ago. This entry mainly introduces non-bird dinosaurs.

The muscular limbs, long tails, and massive bodies are some of the non-avian dinosaurs. They mainly inhabit woodlands or open areas on lakeshore plains (or coastal plains).

In 1841, when British scientist Richard Owen studied several fossilized lizard bones, he believed that they were left by some prehistoric animal and named them dinosaurs, which means "terrifying lizards".

In March 2022, a vertebrate research team from the School of Life Sciences of Yunnan University discovered Koh's Yuxisaurus, the earliest class A dinosaur ever discovered in Asia.

How should dinosaurs be folded, the method steps are as follows:Method steps.

Prepare a piece of colored paper and fold it in half twice along the diagonal and midline.

Please click Enter a description.

Squeeze inward and fold in a square.

Please click to enter ** hand buried description.

Fold the corners upwards into a triangle and do the same with the back.

Please click Enter a description.

Open one side of the triangle and fold it in half, doing the same with the other side.

Please click Enter a description.

Open a corner and fold it up, then fold it in half.

Please click Enter a description.

Bend the front end a few times, change the corner and do the same work, and then compact.

Please click Enter a description.

Flip up a sock of potatoes to search the horns as the head of the dinosaur, and fold the two sides down as wings to bend a few times at the same time.

Please click Enter a description.

The folding method of folding a dinosaur is as follows:

1. Prepare a piece of colored origami first, cut it into a square, and then fold the origami along one of the squares to the first corner of the hood, and press out the creases.

2. Dinosaur origami has the color celery side up, choose a corner with creases, fold both sides diagonally to the creases, and then fold half outwards to leave creases.

3. The two small horns of the long-necked dragon origami, folded outwards respectively.

4. Repeat the later folding steps in step 2 of folding the long-necked dragon.

The habits of dinosaurs.

1. Foraging: The plants that herbivorous dinosaurs can eat are limited by their height, so some small herbivorous dinosaurs will stand on their hind legs in order to eat the leaves of plants in high places. Carnivorous dinosaurs fed on herbivorous dinosaurs and other animals.

The different foraging patterns of various dinosaurs are also reflected in their teeth.

2. Struggle: Sharp teeth and claws are the first to hunt for carnivorous dinosaurs. Tyrannosaurus dinosaurs often went it alone because they sought out lone herbivorous dinosaurs.

Some dinosaurs would move in groups, swarming after locking on to their prey and slicing open the prey's belly with the claws of their second toe.

3. Herbivorous dinosaurs generally have some special "equipment" to deal with the attacks of carnivorous dinosaurs, and these equipment are sometimes tough leather armor, bone rods or bone nails, and sometimes powerful tails. Such as mallet dragon and so on. Large herbivorous dinosaurs would act in groups, and when threatened, they would collectively hold their ground and fight back.

There are a total of 8 steps to fold a dinosaur. 1. Prepare a square of origami paper, fold it into a rice shape, and fold it inward along the middle line to form a square.

2. The two sides are folded towards the midline.

3. After opening the folded part, fold it upwards along the crease.

4. Fold backwards to the back, with a cross point at the left and right folds above.

5. Fold in half along the crease, as shown below.

6. Fold the part out of the head.

7. Fold down the feet.

8. Finally, draw the eyes, and a dinosaur is folded.

Prepare 15x15cm paper folded in half, the corners of the folds are aligned with the middle line, and the triangles on both sides are folded to the middle line; The posterior edge of the crease is flattened, and a triangle is taken to fold out the head of the dinosaur, and the small triangle below is folded out of the small horn as the claw of the dinosaur; Fold the two triangles down from the dinosaur's legs and attach them to the eyes.

Through origami, children can cultivate their hands-on ability, and "ten fingers to heart", through hands-on, develop the brain, so that the brain can be developed and exercised, so that the brain can be maximized, but also promote the learning of other knowledge.

Origami pays attention to symmetry, which can cultivate children's symmetry awareness; Origami requires patience and can exercise children's patience; Origami needs to have a certain sense of space, so that children's sense of three-dimensionality can be cultivated. Origami can fold many items, you can draw inferences, you can fold airplanes, you can fold spaceships, and you can cultivate children's creative ability.