How long does it take for a mobile phone to become moldy when it gets into water, and how long does

Mobile phone service innovation expert Beebee has you covered:

If the battery is removable, the battery should be removed as soon as possible to reduce the corrosion caused by the liquid electrolysis reaction to the internal components of the mobile phone, and at the same time, it can also avoid the occurrence of the phenomenon of inability to charge due to the short circuit of the circuit and the empty battery. If it is not cleaned, the liquid will leave impurities attached to the components after the electrolysis reaction, and its electrical properties will be affected for a long time, such as leakage, etc., and in serious cases, the components or motherboard wires will be corroded.

Moldy? You don't have a fever. Inside the phone are high-precision electronic chips, not proteins. If the mobile phone gets water, it will oxidize and rust inside, and it will not become moldy! Remember?

Hello, glad to answer for you. 1.As long as you turn on your phone, the phone is connected to the power and falls into the water for ten minutes, and the water will immediately enter the inside.

After being fished out, the motherboard of the phone will definitely burn out. 2.If it is soaked in water, the motherboard will be overgrown with mold after a week, and the capacitor and resistance will be damaged when it becomes moldy.

How to deal with water ingress in mobile phones: 1Pick up your phone quickly and wipe it with a paper towel and an absorbent towel, especially in places where water is easy to get in, such as earpieces, charging ports, and earphone ports.

2.You can try to throw the water out from the direction of the charging port and the speaker, and then turn off the phone as soon as possible, wrap the phone in the meter with a paper towel, and leave it for about 12 to 24 hours. 3.

Alternatively, use a desiccant and put your phone in a sealed bag with the desiccant.

Summary. How long does it take for a mobile phone to break when it gets into water? After the water machine is flooded, if the water inside the water machine is not cleaned up in time, more than 12 hours, it will cause corrosion to the electronic components inside the mobile phone, so if the mobile phone is flooded, go to the mobile phone repair point as soon as possible to clean it, there is still no problem.

Do not use the mobile phone after it is flooded to prevent a short circuit caused by water ingress inside the mobile phone. Generally, as long as it is not more than a day, there is still no problem.

How long does it take for a mobile phone to break when it gets into water?

How long does it take for a mobile phone to break when it gets into water? After the water machine is flooded, if the water inside the water machine is not cleaned up in time, more than 12 hours, it will cause corrosion to the electronic components inside the mobile phone, so if the mobile phone is flooded, go to the mobile phone repair point as soon as possible to clean it, there is still no problem. Do not use the mobile phone after it is flooded to prevent a short circuit caused by water ingress inside the mobile phone.

Generally, as long as it is not more than a day, there is still no problem.

Then if you determine whether the phone is really watered.

1. Automatic power on and off for no reason 2. LCD display is sometimes absent, the contrast display of the display screen is abnormal, and the screen is black. 3. The key is out of order, and the key is wrong. 4. The battery symbol keeps showing that it is charging.

5. The earpiece has a murmur and shuts down. 6. The background light, button light and signal light will always be on. Therefore, if you suspect that a second-hand mobile phone may have entered the water, you may wish to check the above 6 aspects, in addition, if there is very little water, and there is no failure, it generally means that the water has not entered the inside of the mobile phone, so there is no big problem, and finally you can shake the mobile phone more vigorously to see if the mobile phone will be abnormal and so on.

Is it water that appears on the phone with a little blue screen?

Yes, dear. It took a long time for the phone to get into the water before I knew what would happen.

1. Fall into clean water when the power is on; 2. Falling into non-corrosive liquids in the case of power failure; 3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not. The first two cases have a good chance of being saved and there may be no sequelae, while the latter depends on luck. Of course, if you are unlucky, PPC will also be bad if you put it in your pocket.

But everything is fine with the phone.

The phone works fine, but only a little bit of water comes in, and it still comes out of the cup.

It's fine, dear.

Hello dear, this question is answered by me, the mobile phone will generally break down within five hours if it enters the water, and it is dried with a hair dryer, why can it blow the motherboard? After the mobile phone enters the water in a small area,In fact, the water entering will not directly reach the inside of the motherboard,Although the headphone jack is large,But Unicom actually has a certain degree of sealing inside,It will not enter directly,Generally, the charging port is far away from the motherboard,Even if the water is broken, the charging board will be broken first,It will not affect the motherboard。 When we use a hair dryer to dry the phone shell, the water will evaporate into water vapor, and the water vapor will diffuse to the inside of the phone and spread to the motherboard of the mobile phone, so that the area of water entering the mobile phone becomes larger.

The phone got into the water, but everything was still functioning normally. It is not possible to charge it, because some water may not penetrate the motherboard or circuitry, and if you rush to charge it, it will damage the machine or burn the machine. The line burned down.

It is recommended that you get into the water of the machine and its normal also put it in the sun. A ventilated place or a hair dryer to dry for a few days. Wait until the water in the water is completely dry and evaporate, and then recharge it, so that it is safer.

The most effective way to get water into your phone is to turn it off. Water is conductive, water into the motherboard of the power-on operation, it is easy to cause a short circuit of small components to burn out, after the shutdown of the mobile phone stopped running, it should save the phone's life. Disassembling the phone is the only way to clean up the internal moisture, disassembling the phone and then using a hot air blower to purge the motherboard, so that the water in the motherboard can completely evaporate.

You can master the basic disassembly skills of the mobile phone according to the online tutorial, and the mobile phone should be disassembled and cleaned up as soon as possible after entering the water. Why can I blow the motherboard when I dry it with a hair dryer? After the mobile phone enters the water in a small area,In fact, the water entering will not directly reach the inside of the motherboard,Although the headphone jack is large,But Unicom actually has a certain degree of sealing inside,It will not enter directly,Generally, the charging port is far away from the motherboard,Even if the water is broken, the charging board will be broken first,It will not affect the motherboard。

When we use a hair dryer to dry the phone shell, the water will evaporate into water vapor, and the water vapor will diffuse to the inside of the phone and spread to the motherboard of the mobile phone, so that the area of water entering the mobile phone becomes larger.

If there is water, it will not flow out by itself if it is not treated, and it is likely to cause corrosion of parts such as the motherboard and battery within a few days of placement, so it is recommended to go to the repair shop in time after suspecting that water has entered, and disassemble and clean up the water to protect the phone.

First of all, we will turn off the mobile phone to prevent the water in the mobile phone from burning the circuit components. Then we shake the phone vigorously, but be careful not to let the phone fall off.

After the water in the phone is thrown out, the phone is placed under a slight heat source such as a desk lamp, and the phone is baked, and the process of letting the water in the phone evaporate generally takes about six hours. Finally, we turn on the phone and check if the phone can hear the sound.

Mobile phones, which belong to mobile terminals, are mobile ** machines that can be held in the hand. In the early days, it was commonly known as big brother because of its large size, and it has now developed into the 5G era.

In April 1973, the American engineering technician "Martin Cooper" invented the world's first mobile phone for civilian use, and "Martin Cooper" has since been known as the "father of modern mobile phones". Until now, mobile phones have become a very important tool in people's lives, and like a Swiss army knife, they are as versatile as a Swiss army knife and bring people a better life experience.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

Basically not.

If the water quality is muddy, the motherboard can be short-circuited and leakage. The components on the motherboard of the mobile phone are corroded, the functional parts are out of order, and the motherboard is paralyzed.

Do not press any keys after entering the water. If you are worried about the mobile phone card, you can take it out directly.

No, the mobile phone should be treated urgently if it gets into the water, and the motherboard may be short-circuited regardless of it.

Summary. If the phone falls into the water for about three minutes, then he is estimated to have been completely broken, if the phone is picked up the moment it falls into the water, then he can still rectify it, but it has been soaked for three minutes, and it is estimated that it also belongs to the peace of the mobile phone.

If the phone falls into the water for about three minutes, then he is estimated to have completely broken the shed socks, if the phone falls into the water at the moment it is scooped up, then he can still start to rectify it, but it has already soaked in the three-point chain next to the clock, and it is estimated that it also belongs to the peace of this mobile phone.

You look at the next handful.

If you don't have time to stay in time, the mobile phone will definitely be broken, more than 10 seconds or more in the water as soon as possible, the software of the mobile phone will enter the water, and then you can use the bracelet, so that the mobile phone is basically scrapped.

You look at the next handful.

If I go to a repair shop to disassemble and wipe my phone within one hour after it gets into the water, will this affect the subsequent use of the phone?

Will it fail when you use it in the future?

Definitely. After repairing, if it doesn't break within a month, it won't break, right?

Yes, dear. If it is broken, will it be repaired if you go to the after-sales service to replace the parts of the mobile phone?

If it breaks, it will be repaired by replacing the parts.

Will there be any impact if the phone is disassembled three times in a row?

Aging parts.

Can the mobile phone be used normally after being disassembled and wiped by a professional who has entered the water? Or do you need to shut it down for a few days?

Half a day is fine.