Can you use egg liquid as fertilizer for growing soybeans?

Of course, this is possible, and it is also a better fertilizer, which is very good.

You can use this as a fertilizer, but you're going to be a bit too wasteful, so it's worth the cost.

If you want to use egg liquid to make soybean fertilizer, you can also use egg liquid to make soybean fertilizer, if you want to use egg liquid to make soybean fertilizer, it is best to rot it first, so that the finishing effect will be better.

There is no problem with this egg mixture to make this fertilizer, and if you try it out, it will grow very well.

Hello, you can use that egg wash to make it, soybean fertilizer, and then you can add something else.

Eggs can be used as fertilizer for soybeans, and they are very effective. Very nutritious.

It should be possible, but it doesn't need to cost so much.

How do you use egg liquid to grow soybean fertilizer? You use egg liquid to grow soybeans to make anti-theft fertilizer, which can be diluted best.

Can you use egg liquid to make fertilizer for soybeans? Yes, this one, you should find a Yang Hua to consult him, and he will tell you if it can be used as fertilizer? You can also go to the Internet to search for online plays, can you make soap?

There should be the right answer, just ask.

This must be the side that can be used as fertilizer, and it is normal for this list to be sent to him.

This can be used as a fertilizer for soybeans with egg liquid, because the egg liquid itself is very nutritious and can promote the growth of soybeans.

Egg liquid can be used as a fertilizer for soybeans, and egg liquid is a good fertilizer after fermentation.

Using egg liquid as fertilizer for growing soybeans has no effect, and it is easy to produce bacteria.

Soybeans can be used as organic fertilizer for fruit trees, generally there are soybean cake fertilizer made of soybeans on the market, which is a kind of high-efficiency organic fertilizer, soybean cake is the fruit of crops, which is rich in nitrogen, phosphorus, potassium and other trace elements, and has little impact on the pH of the soil after fertilization, which can improve soil properties and facilitate plant growth.

Fermentation method. Soybean cake fertilizer, when applied, first put the soybean cake in the fermentation tank, ferment for 7 days, make it fully rotten, and then add 30 40 times of water to filter out the residue.

How to use: The ditch is poured between the rows, and after the fertilizer water is immersed, the soil is restored, and the amount of cake fertilizer applied is 3 4kg m.

Fertilization attention. 1. Weeding and loosening the soil before fertilization. As the tree grows, many weeds grow at the same time, competing with it for nutrients.

The surface of the soil will also be compacted. Therefore, before fertilization, the weeds should be removed first, and then the soil should be loosened, which is not only conducive to the penetration of fertilizer and water into the soil, which is conducive to the reproduction of microorganisms, but also promotes the accelerated decomposition of organic matter fertilizer in the soil, providing a variety of elements to the plant, so that the plant grows well.

2. Water after fertilization. The tree should be watered more after fertilization, otherwise, the fertilizer will be more fertilizer and less water, and the fertilizer will produce high temperature after fermentation, and the root system will be burned. Therefore, after the tree is fertilized, it must be drenched with water the next morning, commonly known as "backwater", which is not only conducive to the absorption of fertilizer, but also can avoid fertilizer damage.

3. Fertilization should also master the weather. Fertilization should not be applied around noon on rainy days and high temperatures in summer. Because fertilization is easy to lose in rainy days, it is best to fertilize on cloudy days or in the evening, after the soil is dry, the effect is better.

Soybeans generally like to take empty nitrogen, phosphorus and potassium fertilizers, but also need an appropriate amount of molybdenum and other trace elements, if molybdenum fertilizer is applied well, it can enhance the activity of soybean rhizobia, improve the utilization rate of nitrogen fertilizer, and ensure the self-sufficiency of nitrogen fertilizer. Usually ammonium molybdate can be used as seed fertilizer or foliar fertilizer, take ammonium molybdate as seed fertilizer as an example, first dissolve ammonium molybdate with hot water, and then mix soybean seeds when the liquid is cooled.

1. What fertilizer do soybeans like?

1. What kind of fertilizer do you like?

Soybeans generally like nitrogen, phosphorus and potassium fertilizers, and it also needs boron, molybdenum and other trace elements, among which molybdenum fertilizer is very important for soybeans, because the rhizobia of soybeans has the effect of nitrogen fixation, and the appropriate amount of molybdenum fertilizer can enhance the activity of rhizobia and improve the utilization rate of nitrogen fertilizer.

2. How to fertilize.

1) Base fertilizer. Generally, 1 ton of farm fertilizer, 2-3kg of urea, 20-25kg of superphosphate and 10kg of potassium fertilizer can be applied per mu. Blindness.

2) Seed fertilizer. Generally, 8-10g of ammonium molybdate can be used for seed dressing per 5kg of seeds, first fully dissolve ammonium molybdate with 250g of hot water in the pot, and then mix seeds after the liquid cooling, which can usually promote root growth, increase the number of rhizobia, and improve nitrogen fixation ability.

3) Top dressing. 1. The plot of the existing base fertilizer can be reasonably applied according to the seedling situation, if the bean seedling is weak and the color is yellow, it can generally be supplemented with some nitrogen fertilizer in an appropriate amount to prevent defertilization.

2. The flowering and poding period is the period with the most fertilizer, and it is generally necessary to reapply a top dressing, which can usually be combined with cultivating to apply tons of human and animal manure, 2-5kg of urea, and 7-8kg of potassium chloride or potassium sulfate.

4) Foliar fertilizer.

1. In addition to ammonium molybdate can be used as seed fertilizer, ammonium molybdate can also be sprayed on leaves from seedling stage to before flowering.

2. Generally, borax solution is sprayed before flowering, which can improve the seed setting rate of soybeans.

2. Can soybeans be used as fertilizer?

1. Can soybeans be used as fertilizer?

Soybeans can usually be used as fertilizer, but they need to be fermented before they can be used, and the right amount of soybean fertilizer water can not only improve the compaction of the soil, but also make the plants grow better.

2. Fermentation method.

1) Soak the soybean seeds in warm water for about 3 hours until the skin of the soybeans is wrinkled, then you can put it in a pot of non-oily water and boil it over high heat.

2) Then simmer on low heat for a quarter of an hour, until you can crush the soybeans by hand, then stop simmering, then let them cool and crush them with a spoon.

3) Then pour the soybeans into the container with the lid with water, it is advisable to fill 8-9 into the full, after the container lid is screwed well, the fermentation container can be placed in a place with a relatively high temperature to ferment, it should be noted that the bottle cap can not be screwed too tightly.

Come on, can soybeans be used as fertilizer? Soybeans can be used as fertilizer, burying soybeans in the ground, so after a long time, the beans ferment, so it is fertilizer.

Put the soybeans in water to clean and brighten them, and remove dirt and mildew from them. After cleaning, it is soaked in water for a few days, so that its original hard and wrinkled skin is filled with water, so that each soybean becomes chubby and can be crushed with a gentle pinch of the hand. The soaked soybeans cannot achieve the effect of direct fertilization of the plant, because the fertility in it has not been fully dissipated, and it needs to go through the process of fermentation.

It takes about a week for the fertilizer to be made. Each time you apply fertilizer, use a shovel to open a gap in the top of the soil, and then use a spoon to add some fermented soybeans to the soil. Finally, cover it tightly with soil.

The purpose of this is to make this fertilizer fully integrated with the soil of Hongchai plants, and also to prevent soybean fertilizer from sticking to the soil surface and forming oxidation with the air, which is easy to deteriorate. It can also become moldy and even attract some harmful insects.

Summary. In fact, soybeans have a high nitrogen content and are high-nitrogen fertilizers, which are very good for the use of foliage plants raised at home.

In fact, soybeans have a high nitrogen content and are high-nitrogen fertilizers, which are very good for the use of foliage plants raised at home.

1. We can fry soybeans or dry them into powder, which is very good for our plants to use as fertilizer. Because after grinding it into a lack of powder, its particles are very fine, we only need to stick to the wall of the pot around a ditch, and then evenly sprinkle some ground soybean flour, and then cover him with one to two centimeters of soil, so that when watering, it will be thoroughly moistened, and it can ferment in the pot, and the fermented nutrients will flow into the soil with the water flow, and be directly absorbed by the plants, so that it can grow quickly. Under normal circumstances, once a month, you go to him and bury him in a pot, and the plants you raise will definitely grow vigorously.

2, nutrient solution we often go to buy cherry blossoms to dismantle some nutrient solution watering flowers, in fact, soybean ridge letter jujube water is a very good material for making nutrient solution, we can directly make soybeans into powder, or use a block hammer to smash into a piece of small pieces, put it into a large oil drum, plus water sealed up and put it under the sun to expose to the sun, summer exposure for a month, other seasons exposure for two to three months, after the liquid is completely blackened, we throw some orange peel and lemon peel inside, It can effectively remove the taste, and then take out this liquid, we can water the flowers with water.

The ratio of water is liquid and water according to the concentration of 1:10 Wu Pi directly poured into the pot, generally every 15 days or so to replenish the base, your plants will grow rapidly. The key is that this nutrient solution does not burn the roots, and it can be absorbed directly when poured directly, and the effect is very obvious, and the growth is very fast.