There are two bars of WiFi signal, and the phone is still connected? Just can t connect?

If you are using a Huawei phone and can connect to Wi-Fi but cannot access the Internet, you can use the following methods to troubleshoot the problem:

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2. If you are using a public network:

1.Try using it in a place with a small amount and confirm that the hotspot is working properly.

2.Please check if you need to log in through a browser** to register before you can access the Internet.

3. If individual applications are not available online:

Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.

If the problem persists, we recommend that you back up your data (third-party communication apps need to be backed up separately) and go to the Huawei Customer Service Center with your purchase voucher for testing.

That means that your wifi signal is virtual in two grids, because of various physical barriers and signal interference, it is normal for the two-grid wifi signal to not be able to access the Internet, so as close as possible to the wifi source, or change to a more powerful router or use a sub-router to solve the problem.

The "two-bar signal" in the question only represents the WiFi signal strength connected to the mobile phone, and does not mean that you can access the Internet. This situation should be a problem with the wifi network itself.

The wifi is not plugged in, and the mobile phone will have a signal display when connected to the wifi, but it will definitely not be able to access the Internet.

There is a problem with the IP, or the signal is simply not good.

Why does the mobile phone connect to the wifi and have two signals, but the network can't be connected?

Maybe the strength of the signal is still not enough.

1. The mobile phone WIFI signal is full, but the Internet speed is high.

There may be two reasons for this slowness: wireless co-channel interference and wireless routers.

Issue. 2. Wireless co-channel interference.

There are 13 channels in the G band that can be used, and each channel can only have one device to communicate, if many devices communicate, then it is necessary to wait for the channel to be idle, resulting in increased latency, packet loss, etc., you may have such a feeling, in the evening and other peak Internet access periods, although the WiFi signal is full, but the network speed is very slow; The mobile phone can use a celluar-zapp to check the wireless interference around the home.

5. Wireless routers, like mobile phones, are also composed of processors, memory, and flash memory, and their performance determines the ability of the best data, the number of machines, if the performance is not good, it is difficult to match the current home bandwidth of more than 100m.

6. Wireless routers with poor performance, in high-speed data, are easy to cause packet loss, crash and other conditions, and the apparent response is that although it is a full signal, there is no network or the network speed is very slow.

7. If you encounter the situation in the subject problem, check the wireless signal interference around the home, and try to use the 5G frequency band of the dual-band wireless router; The home bandwidth has been upgraded to 100M and above, so it is best to choose a full gigabit wireless router with good performance.

Hello, wifi signal regardless of whether there is a network mobile phone and other equipment can be connected, the user can not use the network after connecting to wifi, first confirm whether your broadband line is smooth, you can check whether the indicator light of the broadband cat has LOS red light flashing, if there is a broadband failure, so the router's wifi can not use the network, at this time, the user can call the operator's customer service to report the fault processing, after the fault report, there will be staff to come to the door to troubleshoot.

If the broadband modem can be connected to the network normally, then it is a problem with the router, and you can check whether the network cable is connected correctly. If the network cable between the broadband modem and the router is normal, you can restore the router to its factory value, and then reset the router parameters to see if it can be restored to normal

2. Then open the browser and enter the management address and login password of the router.

3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

<>6. After the wireless setting is completed, click Save, and then restart the router to use it normally.