The iPad screen is blurred and cannot display the content

1. According to the general rules of electrical appliances, first rest the ipad for an hour to let it get relief.

2. For the first time, the iPad needs to be turned off.

3. Don't throw it directly from a high altitude, as it will hit flowers and trees.

4. Use the glass surface as a force point, slap on soft objects such as sofas and pillows, use strong force, and pat to make the loose opening tight. Note that it's something soft, if it's hard, it may directly crack the screen, and you won't be able to save it at that time.

5. Remember not to shoot sideways. Do not shoot the back side of the pillow that is not a glass side, as this can cause serious consequences and may cause system disorder. It's not like they have a back injury, they have to be slapped in the face.

6. Sometimes, this is not a success, it takes a few more experiments, sometimes it takes hundreds of times, you have to exert force, let it feel your strength, and they will be together.

7. If you accidentally knock it, you can pat it a few times on the other side of the knock, in the opposite direction, and the glass side is facing inward.

8. When you have taken a few shots, you turn on the ipad again, if you find that the screen of the ipad is almost good, there is only a little imperfection, just gently pat it on the glass surface a few times, and fine-tune its face. If its small face succeeds in becoming beautiful, it can basically be determined that the interface inside is loose, and the technical term is "poor contact". In this way, I really became a computer repairman, and I took no less than 10 photos for others, which is very efficient.

Tablet screen black screen and blurred screen is a relatively common display failure, and most of the tablet screen failures are caused by software conflicts or display drivers. Judging from the experience of customers contacted by computers, software problems can be solved by flashing the machine, that is, reinstalling the firmware once.

If it can't be solved, it is estimated that it is not caused by software, or the display is faulty, there are 7 percent of the possible display line arrangement, 3 percent of the motherboard problem.

No matter which one it is, it is a hardware failure, and it is recommended to find a professional to send it to a regular maintenance station to solve it.

You can buy one on the second-hand market, which is cheap and can help you.

If the screen is blurred, it is likely to be a screen problem, but software and other hardware problems are not ruled out, and it is recommended that you take a look at it after sale, so it is safer.

Get it to the repair shop, warranty, and let the maintenance personnel change the screen.

Most of the time the screen is broken, you can go to a different screen to take a look.

Force restart to take a look, if it doesn't work, you have to fix it.

That could be a broken screen. Let's change the screen!

Please turn it off and back on.

It may be a smell caused by a blockage.

Recently, a friend reported that his iPad suddenly had a blank screen, what is going on? What should I do if the Apple iPad has a splash screen? Don't worry, the next hall will bring you the solution to the sudden blurred screen of the iPad, I hope it will help you.

1. The first thing to consider is whether it is a system problem, restart the iPad first. Press and hold the power button for ten seconds, and then press and hold the home button to force the power on;

2. After turning on the computer, observe the screen to see the reflection of the screen, and then we can see whether it is a problem with the screen itself, such as the ipad in the picture below, you can see that the screen is fine, it is other problems. If the screen is broken, then you can only replace it with a new one;

3. If the screen is fine, then you can first consider whether the cable or connector is loose or broken, you can refer to some gods' methods, the glass side down to touch it, shoot towards the quilt, the strength must be moderate, so that there is a great chance that the interface can be tightened. We can take a look at the internal wiring diagram of the pad, as shown below;

4. If there is no problem with startup, then it is a problem with the system, and you can upgrade the system of your iPad;

5. If neither method works, then it must be a serious problem in the machine, and it is recommended to send it for after-sales maintenance.

Well, the above is all about what to do with the Apple iPad screen blurred, for the iPad suddenly screen solution to the problem, have you learned it?

There are many solutions to the iPad flower screen stripe, it may be that the device screen is damaged, and it can be repaired after the Spring Festival; It may be caused by a system bug, you can try to upgrade the system to solve it; It may be**There is a blurred screen fragment itself, and you can switch** detection.

iPad skills: 1. iPad has a screen recording function, you can record the device's game operation screen, turn on the device, then open the device's control center page, click the screen recording button, click "Start recording", and wait for three seconds to start screen recording.

2. iPad can't connect to wifi, you can try to restore the network settings to solve it, open the device, click the home settings button, click general, click restore to carry out the network restoration operation, after restoring, you need to re-enter the password to connect to wifi.

3. iPad can't be ** software, it may be caused by the device being disconnected, you can find wifi in the control center, restart wifi networking, it may be that the network is unstable and you can switch the network again.

There are many solutions to the iPad flower screen stripe, it may be that the device screen is damaged, you can contact the after-sales maintenance; It may be caused by a system bug, you can try to upgrade the system to solve it; It may be**There is a blurred screen fragment itself, and you can switch** detection.

iPad use skills: 1. iPad has a screen recording function, you can record the game operation screen of the device, turn on the device, then open the control center page of the device, click the screen recording button, click "Start recording", and wait for three seconds to start screen recording.

2. iPad can not be connected to wifi, you can try to restore the network settings to solve, open the device, such as click the home page settings button, click general, click restore to carry out network restoration operation, after restoring, you need to re-enter the password to connect wifi.

3. iPad can not be ** software, it may be caused by the device being disconnected, you can find wifi in the control center, restart wifi networking, it may be caused by unstable network, you can switch the network again**.

There are many reasons for the iPadmini blurred screen, such as hardware problems, line failures, system bugs, etc., which may make the screen blurry, first encounter the blurred screen, you can first turn off the ipad, let the ipad rest for a while, lower the temperature, and then turn on the view, and the software is incompatible will also cause the ipad to appear blurred screen, at this time, you can also use the shutdown method, stop the operation of the software, and then boot to uninstall the incompatible software, if you still can't solve the problem, You can factory reset your iPad through your computer, and if it doesn't solve the problem, you can rule out the system bug.

If it is a fault of the banquet friend's line, you can turn off the ipad first, and then try to use soft things such as pillows and pillows, and pat the back of the ipad, if you are afraid of breaking the picture, don't use this method, after all, this method is very risky, and if the screen is broken, it may bring you greater losses. Although this method can solve the blurred screen caused by line faults, it needs to be operated with caution.

If the ipad is within the warranty period, as long as it is not the reason for the people, it is free to provide maintenance services, so the ipad is within the warranty period, don't repair it yourself, you can send it directly to the after-sales service, they will help you troubleshoot and solve the problem.