CPU rattling sound, why? 30

It seems that the fan is a bit of a problem, but, as long as it is playing a larger game or program, it is obvious that it will sound continuously, and the computer will not work when it is on, because the motherboard of your computer supports the fan automatic adjustment function, and the fan will change with the power consumption of the cup.

This is also the case with my computer, because the motherboard supports the fan auto-adjustment feature.

On the same floor, it should be a hard drive. This is because when the hard disk reads a relatively large amount of data, there will be a sound. If it is a two-hard disk system, you will hear this sound visibly when you call up the data of the second disk in the system of the first disk.

It is definitely a hard disk that the CPU cannot make a sound, so it is recommended that you check whether the hard disk is damaged, and clean up the chassis may solve the problem.

Oh, it's impossible, the CPU doesn't have a fan and it's inactive, so it's impossible to make a sound, it works to mean it's normal, if it's burned, then you can't light up the monitor at all, so, the CPU is fine, hehe, you're looking for it,

It's the sound of the hard disk reading the WestJet's hard drive is very loud, but the performance is also good.

It's too much ash It's highly recommended to pull it out and take the leather crutch to blow it!

It is generally impossible for the CPU to make sound, so it is recommended to check other parts.

Agree with the first floor, is the sound of the hard disk.

Agree with the first floor of hard drive sound.

Here's why:

The hard drive is broken and needs to be replaced.

Hard disk is the most important storage medium for users to save data, it can be said that the most unacceptable for users is the damage of the hard disk, because the damage of other hardware of the computer can also be repaired by replacing parts, etc., but once the hard disk is damaged, the consequences are unimaginable, and many important data of the user will be lost, so it is very necessary to analyze some small faults of the computer hard disk, so as to prevent problems before they occur.

1. After powering on, the hard disk does not have any response and is the same as before the power connection, most of this situation is due to the problem of the circuit, and the hard disk motor will basically not break.

2. After connecting the power supply, the hard disk runs very normally, it can be detected in the BIOS, it is hung as a slave disk, in the disk management, this hard disk can be found, and the screen shows "disk not allocated". This situation is basically a mess of the partition table, making the partition unrecognized.

3. After powering on, if you hear a clattering sound or other abnormal sounds from the hard disk, the power should be cut off immediately. Don't try again, if you try a few more times, the magnetic head may cross out the disk, the precious information will be completely lost, and the intelligent will be sent to the repair shop, and the data will be opened, but the cost will be very expensive.

4. After entering the system, you can see the data but you can't access it, or you can't copy it. The vast majority of this is due to bad sectors on the hard drive; There may also be a problem with the hard disk firmware, and some special characters will appear with a bad sector repair tool; The disk media of the hard disk itself is of a quality problem.

5. The hard disk is working normally, but it is not detectable in the BIOS, which is basically a firmware problem. It can also be due to loss of hard drive initialization information, in which case the data is basically unsalvageable.

6. The hard disk is misidentified, most of which is caused by the offset of the magnetic head. There is a problem with the firmware of a very small brand of hard drive, and there will be a phenomenon of misidentification.

The CPU pins of the motherboard may be damaged, the load increases, and the current increases when the electric spark is sparked.

Your configuration to play games, drawing, etc. should be smooth, the sound you say may be from the fan, when you run a large game, the CPU temperature will increase, and then the speed of the fan will also increase accordingly and produce noise, when there is such a sound, you touch the fan with your hand to see if the sound disappears, if so, it must be from the fan.

The fan got stuck on something. Usually, the noise of the computer comes from the fans. and hard drives. The memory module is also plugged in. ,

It should be the CPU overloaded.

The reasons are manifold:

1. Dust. Once the fan is used, there will be a lot of dust sticking to the fan blades (nonsense Open the case and clean up the dust on the CPU fan and power supply fan...)

2. Loosening. The other is to pay attention to the loading and unloading method of the fan before cleaning, so as not to loosen the equipment caused by non-standard installation after cleaning. Generally, the loosening phenomenon mainly occurs on CPU fans and cup radiators, which is the case in my house, and the sound is also very loud when it is turned on, but it is good to press the fan tighter.

Your phenomenon is very similar to mine, make a suggestion, I hope it can help...

It is recommended that you clean up the CPU fan, because the internal oil is exhausted due to too much dust, and when you run or run a certain software that makes the CPU run faster and heats up, the CPU fan must speed up the heat dissipation and cause friction to make a sound. Add some oil or change the fan.