Why is there no sound on the iPhonexs when the sound is so loud?

The reason why there is no sound from the Apple XS external amplifier may be because the external speaker is broken First check whether the volume button is turned to mute If the cause cannot be simply ruled out, it is recommended to send it for repair. iPhone XS playback no sound to solve the problem:

Try to fully charge your phone before restoring it to factory settings.

If there is no sound if you restore the factory settings, you can only change the external speaker. The main reasons why the phone suddenly has no sound are as follows: 1. The most common is that the volume is not turned on and the phone is set to vibrate.

Many people often forget to modify it after setting it to vibrate, and when the phone is placed on the pillow, the sound is very small when it vibrates, resulting in no hearing. 2. If the speaker of the mobile phone is broken, you need to take the Apple repair center in this case; Do not repair in a small shop to prevent the other party from replacing parts. 3. The phone has a software failure and the audio driver is damaged.

In a similar situation, you can try yourself from the official **** driver of the phone in question. Of course, if it can't be solved, then you need to go to the Apple repair center If you still can't reach the expected state of the phone after troubleshooting through the above situations, in order to avoid affecting your daily use, please contact Apple customer service center. The solutions are as follows:

1. Click to open Settings - General - Accessibility - Use of incoming calls in physical activities. 2. Use the headphones of the iPhone to access the interface, turn on the iPod to listen**, then press pause, press the home button to return, turn off the iPhone, pull out the headphones, and then turn on the phone, it can be solved. 3. Don't unplug the earphones too quickly, but gently rotate them.

Unplug it too quickly, the program of the phone does not respond, and it keeps the headphone mode all the time. 4. When the headset is turned off, pull out the earphone, find a needle, and gently poke it twice into the earphone hole. After poking, wrap the toilet paper with a needle and wipe the inner wall of the headphone jack to wipe off the dust covering it.

Summary. Good evening, dear, I'll help you with that. The specific steps are as follows:

1. Check whether your phone has turned on silent mode, turn off this mode and try again.

2. Turn your own volume button plus to the maximum and check if there is any sound from the speaker.

3. Restart your phone and check whether the speaker is working properly.

4. If the system is caused by a problem, it is enough to update the new system.

5. None of the above methods work, that is, there is a problem with the hardware, and you need to go to the after-sales service for inspection and maintenance.

The Apple XS phone has a sound on it and no sound on the bottom.

Hello Hu Yuzheng, dear I am a teacher of Xiao Zhang, a total of 4200 customers, providing comprehensive mobile device purchase and emotional services and other consultations, I have seen your question, and I am sorting out your reply, please wait patiently for 5 minutes. You can pretend not to speak first to save the number of questions and answers

Good luck in the evening, honey, I'll help you solve this problem. The specific operation steps are as follows:1、Check whether your phone is turned on silent mode,Turn off this mode and try again2、Turn your own volume key plus sign to the maximum,Check whether the speaker has sound3、Restart your mobile phone,Check whether the speaker is in normal use4、Caused by the cavity hunger problem of the system,Update the new system 5、The above potato method is not good,That is, there is a problem with the hardware,Need to go to the after-sales service for inspection and maintenance。

Kiss the normal one speaker has sound and one has no sound, it is because the hardware is damaged or loose, and the mobile phone speaker is broken, and in this case, you need to take it to a mobile phone repair shop for repair. Generally speaking, it is best to return to the factory for maintenance, and do not repair it in a small shop to prevent the other party from replacing parts.

I hope that I can help kiss you, do you still have questions? If you have a clan branch, you can ask me again Finally, kiss you, peace and joy, everything is successful, <>

Summary. 1. There is no sound outside, there is sound when the earphones are plugged in 1, and the mute mode is turned on. 2. The switching is abnormal when using the earphones.

3. There is a foreign object in the headphone jack or abnormal contact with shrapnel, resulting in automatic immersion in the headphone mode. 4. Settings-General-Accessibility-Audio call mode is selected incorrectly. 5. A small amount of water has been put into the bottom of the mobile phone.

2. There is no sound when the headphones are plugged in and 1, and the volume is turned to the lowest. 2. The mobile phone has been dropped and soaked in a lot of water. 3. There is an abnormality in the tail plug cable.

What is the reason why there is no sound on the iPhone XS Max?

1. There is no sound outside, there is sound when the earphones are plugged in 1, and the mute mode is turned on. 2. The switching is abnormal when using the earphones. 3. There is a foreign object in the headphone jack or abnormal contact with shrapnel, resulting in automatic immersion in the headphone mode.

4. Set the sock with the mold - general - auxiliary function - audio branch refers to the wrong way of speaking. 5. A small amount of water has been put into the bottom of the mobile phone. 2. There is no sound when the headphones are plugged in and 1, and the volume is turned to the lowest.

2. The mobile phone has been dropped and soaked in a lot of water. 3. There is an abnormality in the tail slow plug line. <>

Useless. That's a problem with your cable, and it is recommended that you repair it.

So what is the reason why the front camera is black?

Dear, has your phone been dropped?

1. It may be that the screen of the mobile phone is malfunctioning, and the screen cable is loose or short-circuited, which makes the camera screen of the mobile phone appear black, flashing, and blurry. In this case, try to ask professional maintenance personnel to deal with it, and let professional maintenance personnel repair or replace the corresponding electronic components. 2. It may be that the function of the mobile phone system blocking liquid is disordered, resulting in the display error of the mobile phone screen, and the black screen of the mobile phone is slow.

This kind of problem can be dealt with by restarting the phone to get the phone back to normal. 3. It may be that the application program of the mobile phone is conflicting, which causes the camera of the mobile phone to appear black screen or freeze. If this problem occurs, you can try to uninstall some software first, save important data first, and then restore the factory settings.

If your mobile phone memory is not large, and you are running a lot of application software at the same time, it is easy to have program conflicts, and the incompatibility of application software and mobile phone system will also lead to the occurrence of black screen on the mobile phone, you can check whether there is a problem with the camera program.

Maybe the horn is broken.,This is a hardware problem and can only be sent for repair.,If you have strong hands-on ability, you can also install a new one yourself.。

If the sound is too low, that's a problem with the settings. You can turn up the volume a bit in the settings.

1. You can check whether the volume is up, you can press the volume + tone key on the screen to try.

2. You can check whether the phone is on silent mode, if there is no sound when the call comes in silent mode.

3. If the speaker problem is a hardware failure, then you need to find a local Apple after-sales inspection machine.