LED display P2 97 and P3 which effect is good?

The effect is almost the same, mainly used in the rental market 500*1000mm cabinet, P3 is a conventional screen.

First of all, the value after p is the distance between two pixels or lights (in mm), so the dot spacing is respectively. For example, there are 16W pixels on 1 square meter area, P3 has about 11W pixels, and P4 has only 6W points.

To put it simply, there are these points: 1. The clarity of P2 is not the same, the definition is greater than that of P32, the point density is different, the P3 density is 11W square, the density of P2 is 25W square, and the **different P2 is about three times that of P3**, and more than Henan Huana Electronics Large LED Display Engineer will answer for you.

There is no exact answer to this, it mainly depends on the use scenario and the owner's requirements. The resolution is higher, but it is expensive.

P3 is an LED display with a dot pitch of 3 millimeters (mm), and it is an LED display with a dot pitch of millimeters. The same length, width and area of the LED display, the resolution is higher than that of P3, so the picture is clearer and more suitable for close distance. If you look at it from this point of view, it is obviously better, after all, the resolution is higher and you can see it more clearly.

But the LED screen is not suitable for all people, mainly because this type of LED screen is more expensive, and not all families can afford it. Under the premise of the same lamp beads, the same packaging method and packaging materials, and the same manufacturer's production, the ** of P2LED display is higher than that of P3, so it is best to choose the most suitable one.

1. Screen area.

The size of the screen is also related to the purchase of our LED display. Under normal circumstances, if the indoor LED display does not exceed 20 square meters, we generally recommend using the bracket form, if it is exceeded, it is recommended to use a simple box. And if the area of the screen is larger, it is usually possible to compensate for the defect of our closest ** distance through the area of the screen.

2. Installation environment.

LED display working environment temperature range -20 t 50, working environment humidity range 10 to 90 rh; Avoid use in bad environments, such as: high temperature, high humidity, high acid and alkali salts and other harsh environments; Keep away from flammable materials, gases, and dust, and pay attention to safety in use; Ensure the preservation of transportation and prevent damage caused by bumps during the transportation of return letters.

Compared with other outdoor displays, the outdoor full-color LED display has a higher resolution and more realistic color reproduction, which makes this model of display able to bring a clearer and more realistic image effect and provide a better visual experience.

<>In addition, the K&P outdoor full-color LED display also has the following performance and advantages of the stove: 1High brightness:

The LED display can still present the picture clearly under strong outdoor light, and the brightness is higher than that of traditional TV screens and projectors. 2.Waterproof and dustproof:

The outdoor full-color LED display adopts professional waterproof technology to prevent the deterioration of the display effect caused by harsh weather or external factors such as water and dust. 3.High Stability:

The LED display has a long service life, supports 7*24 hours of operation, and has stable and reliable performance. In short, the effect of outdoor full-color LED display is very good, which is suitable for open-air customization of various scenes such as advertising, entertainment, live hall and outdoor performances.

Summary. What is the difference between indoor LED electronic display and P3 Hello, the point spacing of the LED display beads is millimeters, which is smaller than that of P3, so the number of LED lamp beads distributed in its single module is more, when spliced together, it has more pixels, and the clearer the natural picture, at the same ** distance, the image displayed by the LED display screen we see is clearer than the picture shown by P3, and the visual experience is better, which is also a direct difference between them.

What is the difference between indoor LED electronic display and P3 Hello, the point spacing of the LED display is millimeters, which is smaller than that of P3, so the number of LED lamp beads distributed in its single module is more, when spliced together, it has more pixels, and the clearer the natural picture, at the same ** distance, the image displayed by the LED display screen we see is clearer than the first surface of the painting fiber shown by Takano P3, and the visual experience is better, This is also a direct difference between them.

Second, the LED display screen of the product category difference is basically a full-color screen, that is, three-color, because it is mainly used in indoor conference lecture halls or press conferences and other fields, and these occasions mainly display ** or imitation data, so it will not use monochrome. The P3 LED display is full-color, as well as single-color, such as some information advertising screens or LCD splicing screens commonly used on the top of the strip screen, used to display some welcome words and other purposes, basically used monochrome, such as single red or single green. Second, the difference between the LED display in general and P3 is a module, rarely used in the box, and in the whole industry the smaller the point spacing** is more expensive, of course, it is also in the case of the same objective factors, but the difference is not particularly obvious, one square is a difference of several hundred yuan.

If you look at the difference in effect comparison, and P3The LED display is mainly the difference in the point spacing to show the different clarity of the screen twilight, which is a more intuitive difference, but it also depends on the specific application, such as the distance of the distance, if the distance is relatively close, then the difference is still more obvious, and if it is some large-scale scenes, the distance is more than ten meters away, then the difference they show is not obvious, almost invisible. Therefore, the difference between LED display and IP3 is basically the resolution caused by the size of the point spacing, so that there is a little difference in clarity, if the distance is close, the contrast of the display effect will be more obvious, if the distance is relatively far, the display area of the entire LED display is relatively large, then the big key is almost impossible to see the difference.

In a nutshell, there are a few points:

1. The clarity is not the same. The sharpness is greater than P3

2. The point density is different. The density of P3 is 11W square and the density is 16W square.

3. **Different. Quite a bit more expensive than P3.

Henan Huana Electronics large LED display engineering company will answer for you.