Which highway is G5011 National Highway G505 from where to where

Updated on society 2024-04-16
8 answers
  1. Anonymous users2024-02-07

    Wuhu-Hefei Expressway, also known as Hechao Wu Expressway, referred to as Wuhe Expressway, China's national highway network number G5011, is one of the contact lines of G50 National Highway, the whole line is located in Anhui, has been opened to traffic.

    Hechaowu Expressway is a key transportation infrastructure construction project in Anhui Province during the "Eighth Five-Year Plan" period, an important trunk highway leading to the economically developed coastal areas in Anhui Province, and a section of the Hefei-Hangzhou comprehensive transportation network in the "Yangtze River Delta Comprehensive Transportation Network" plan sponsored by the State Planning Commission. The project starts from the Feidong Longxi interchange and ends in Yongzhen, Hexian County, with a total length of 100 kilometers, which is a two-way 4-lane highway with full enclosure, full interchange and controlled access, with a design speed of 100 kilometers per hour. Construction started in December 1992, the first two phases of the project were completed in December 1995, and the third phase of the Wuhu Yangtze River Bridge North Bank Highway Link was opened to traffic in September 2000.

    The roadbed is wide meters, and the design load of the whole road section is super 20 for cars and 120 for trailers. There are 1 extra-large bridge and 2 tunnels on the whole line, and there are 5 toll stations in Yongzhen, Shenxiang, Guanzhen, Bantang and Zhegao. Hechaowu Expressway began to be reconstructed on April 1, 2004, and the whole line was asphalt concrete pavement after the reconstruction, and the entire reconstruction project was completed on December 28, 2004.

    In May 2009, it was renamed G5011 Wuhe Expressway.

  2. Anonymous users2024-02-06

    Wuhu Hefei Expressway, referred to as Wuhe Expressway, China's national highway network number G5011, is one of the G50 national highway contact lines, the whole line is located in Anhui, has been opened to traffic. Before the state formulated a unified highway road name and number, this expressway was often referred to as Hechaowu Expressway or Hewu Expressway.

  3. Anonymous users2024-02-05

    Summary. The starting point of the project is located in Shimenzi Bridge (Mengliao boundary) in Kulun Town, Kulun Banner, and is connected to the Liaoning section of the planned National Highway 505, with the starting point of K0+000, the route goes north to the south of Anjiayao Village after about 11 kilometers of Kuzhang Line, and reaches the south of Pailou Gacha after fully utilizing the existing provincial highway 305 kilometers, and the line is built with a single horn, and the route continues to connect with G505 to the west, passing through Aqima Gacha and Kundi Gacha and then bypassing the north of Baiyinhua Town, and continuing to the southwest. In the north of Baiyinhua Town, it connects with the existing G505, the route continues to the west through Chahar Gacha, Haili Stegacha North, Tulitu Village and then arrives at Gelin Gacha, the route uses part of the cement road through the village to continue westward through the north of Daotian Village, Dawobao Village, and then connects with the existing G505, the route follows the existing G505 line to the west through the PNG Railway and arrives at Kouhezi Town, the route uses the street on the north side of Kouhezi Town, and then the route reaches the boundary between Kulun Banner and Naiman Banner.

    Hello dear Rough roll, your question has been received, it takes time for Yan Shuyu to inquire about the status of filial piety and typing, it will take about 3-5 minutes Please wait patiently

    The starting point of the project is located in Shimenzi Bridge (Mengliao boundary), Kulun Town, Kulun Banner, along with the Liaoning section of the planned National Highway 505, the starting point is K0+000, the route to the north uses the Kuzhang Line for about 11 kilometers and then beats the orange to reach Anjiayao Village to the southwest, and fully utilizes the existing provincial highway 305 kilometers to reach the south of Pailou Gacha, the line construction of a single horn interchange, the route continues to the west and connects with G505, passing through Aqima Gacha and Kundi Gacha and then bypassing the north of Baiyinhua Town, and continuing to the southwest. In the north of Baiyinhua Town, it connects with the existing G505, the route continues to the west through Chahar Gacha, Haili Stegacha North, and reaches Gelin Gacha after Tuliti Village, the route uses part of the cement road through the village to continue westward through the north of Daotian Village, Dawobao Village, and then connects with the existing hidden G505, the route goes west along the existing G505 line and crosses the PNG Railway to reach Kouhezi Town, the route uses the street on the north side of Kouhezi Town, and then the route arrives at the Honghe Hall on the border between Kulun Banner and Naiman Banner.

  4. Anonymous users2024-02-04

    The G5515 Expressway is the Zhangnan Expressway.

    Zhangnan Expressway is Zhangjiajie-Nanchong Expressway, the high-speed number is G5515, starting from Zhangjiajie Yongding Expressway Zhangjiajie Yongding Interchange, ending at Nanchong City, Gaoping District, Nanchong City, Hurong Expressway Nanchong East Slag Hub, with a total length of about 590 kilometers.

    In November 2014, the construction of the Zhangjiajie-Sangzhi section of Zhangnan Expressway (Zhangjiajie-Sangzhi Expressway, referred to as "Zhangsang Expressway") began. On December 26 of the same year, the northern section of the Enshi-Qianjiang Expressway was completed and opened to traffic, and its Xianfeng interchange hub to Shimenkan Hubei and Chongqing boundary section belonged to the Zhangnan Expressway.

    On December 10, 2015, the section from Quxian to Dazhu (except for the Huayingshan Tunnel is still under construction) was opened to traffic. On the 30th, the Chongqing section of the Enshi-Qianjiang Expressway was completed and opened to traffic, and on the 31st, the Longshan-Ganbizhai section of the Zhangnan Expressway in Hunan Province (the section of the Longshan-Yongshun Expressway) was opened to traffic.

    Road design

    Zhangnan Expressway spans Hunan Province, Hubei Province, Chongqing Municipality and Sichuan Province, starting from Zhangjiajie City, Hunan Province in the east, connecting the end point of Changsha-Zhangjiajie Expressway (National Expressway G5513) and reaching Nanchong City, Sichuan Province in the west.

    It is planned to be composed of Zhangjiajie-Sangzhi Expressway, Sangzhi-Longshan Expressway (as of October 2021, under construction), Laifeng-Xianfeng Expressway, Enshi-Qianjiang Expressway Xianfeng-Qianjiang Section, Shizhu-Qianjiang Expressway, Liangping-Zhongxian Expressway, Nanchong-Dazhu-Liangping Expressway and other road sections, and use Ankang-Laifeng Expressway (National Expressway G6911) Hunan Longshan to Hubei Laifeng Section, Shanghai-Chongqing Expressway (National Expressway G50) Chongqing Section Shizhu Sandian Hub to Zhongxian Ancient City Walled Section.

  5. Anonymous users2024-02-03

    Beijing Kunming Expressway.

    Beijing Kunming Expressway, also known as Beijing-Kunming Expressway, referred to as Beijing-Kunming Expressway, China's national highway network number: G5.

    Beijing-Kunming Expressway is a highway connecting Beijing and Kunming, with a total length of 2,865 kilometers, passing through Baoding, Shijiazhuang, Taiyuan, Linfen, Xi'an, Ankang, Hanzhong, Guangyuan, Mianyang, Deyang, Guanghan, Chengdu, Ya'an, Xichang, Panzhihua, Yongren, Yuanmou, Wuding, and finally Kunming, the capital of Yunnan Province.

  6. Anonymous users2024-02-02

    You Min Xing good pro G5 Expressway (Panxi section) 2410 kilometers 100 meters (Panzhihua to Xichang direction) Beijing-Kunming Expressway (also known as Beijing-Kunming Expressway or Beijing-Kunming Expressway), is a highway connecting Beijing and Kunming, China's national highway network number for December 22, Beijing-Kunming Expressway Shijiazhuang to Taiyuan section was completed and opened to traffic. So far, the last break point of the Beijing-Kunming Expressway, which is a national highway network project, has been opened up, and the whole line has been connected. Among them, the Ya'an-Xichang section in Sichuan Province is the most difficult.

    The total length of the Jingkun Gaoqiao is 2,865 kilometers and the design speed is 120 kilometers per hour. I hope mine can help you, if you are satisfied with my return to the bridge, please give a thumbs up and thank you.

  7. Anonymous users2024-02-01

    <>G515 refers to: National Highway 515. G515 National Highway starts from Dingzhou, Baoding City, Hebei Province, and ends at Jun County, Hebi City, Henan Province, with a total length of 350 kilometers, which is a national trunk highway.

    The national highway is an important traffic artery connecting different provinces and cities. The general national highway number is: letter G + 3 digits Arabic numerals, divided into four types:

    1. Capital radiation: It represents a radial national highway centered on the capital Beijing, and the specific number is: G101-G112.

    2. North-south longitudinal line: the national highway that represents the north-south direction, the specific number is: G201-G248.

    3. East-west horizontal line: indicates the national highway in the east-west direction, and the specific number is: G301-G361.

    4. Liaison line debate: the liaison highway between national highways, the specific number is: G501-G581.

  8. Anonymous users2024-01-31

    G5513 is Changsha-Zhangjiajie Expressway, referred to as Changzhang Expressway, also known as Changzhang Expressway. The national highway network number of Changzhang Expressway is G5513, which is one of the connecting lines of Erenhot-Guangzhou Expressway (G55), with a total length of 310 kilometers, and the whole process is divided into two ridge oak sections, one is Changsha to Changde, and the second section is Changde to Zhangjiajie. <

    G5513 is Changsha-Zhangjiajie Gaopants Tansu Highway, referred to as Changzhang Expressway, also known as Changzhang Expressway. Changzhang Expressway's national Yingchunbian Expressway network number G5513 is one of the connecting lines of Erenhot-Guangzhou Expressway (G55), with a total length of 310 kilometers, and the whole journey is divided into two sections, one is from Changsha to Changde, and the second is from Changde to Zhangjiajie.

Related questions
10 answers2024-04-16

Gui G is a car from Laibin City, Liuzhou City, Guangxi Zhuang Autonomous RegionLaibin City includes Xingbin District, Heshan City, Xiangzhou County, Wuxuan County, Xincheng County, and Jinxiu Yao Autonomous County. The license plate of Liuzhou City is Gui B, and the administrative power of Laibin City belongs to Liuzhou. >>>More

9 answers2024-04-16

Personally, I think G510 is good, because G510 has the following advantages: >>>More

9 answers2024-04-16

I haven't seen the direct comparison between G11 and G20,I've seen the comparison of G11 and G10 pictures,G11 is much better than G10,It seems that G20 is an upgraded version of G10 instead of an upgrade of G11,Just listed** Equal to G11,I always feel that there are a lot more flashy things,I think TV picture quality is the first; There should be a higher-model G series to replace the G11

8 answers2024-04-16

This refers to the connection method with the computer, which is generally divided into wired and Bluetooth transmission. and two refer to the speed of the on-board downlink frequency. That is related to the browsing speed of the PC and the Internet rumors to transmit the quality of transmission faster, more stable, of course, the cost is also higher, the future wireless mouse is the mainstream. >>>More

9 answers2024-04-16

G00 is a fast point positioning, the tool does not process the workpiece, that is, it is positioned to the position of the workpiece to start processing; G01 is a straight line interpolation, the tool has begun to process, can be used to process the outer circle, inner hole and other straight parts; G02 is arc interpolation, and G03 is the same arc interpolation, the difference is that G02 is clockwise arc interpolation, and G03 is counterclockwise arc interpolation, that is, the arc direction is different, the selection instructions are also different, are used to process the part of the workpiece with arcs!