Lenovo computer keeps pressing F11 when it is turned on, will it delete everything?

No, generally pressing F1-F12 when booting will enter the built-in interface of the system, such as: BIOS, safe mode, etc., which will not affect the system files, let alone delete things.

Under normal circumstances, the Lenovo machine is turned on: F2 enters the BIOS, quickly starts F12, F8 safe mode, and F4 restores with one click.

It is recommended that you back up the entire important data, if it is a thinkp machine, there is a pre-installed system, and the boot F11 is a one-click recovery system.

Lenovo Community.

Can't I enter the BIOS by pressing F1 when I boot up? If it is not the original system, it cannot be recovered! If it's the original system, just press the blue button directly when you boot it.,No need for +fn.。

Lenovo computers have a dedicated recovery hotkey, "LVT" is not F11.

It's a kind of hotkey for restore software, and if you use too much, it will restore the system.

I want to ask when I first bought it, did he install this restoration for you? The general restoration is only to restore the things of the C disk, and the other disks will not move.

1. The battery on the motherboard is dead.

Solution: Replace the coin cell battery on the motherboard.

2. The floppy drive is set to start, but there is a problem with your floppy drive.

Solution: Press del to enter the BIOS at boot, boot the boot order, and turn off the floppy drive to boot.

Turn off the power-on floppy drive detection function: Start the computer, and then press the [DEL] button to enter the main interface of BIOS settings;

Select the "Advanced BIOS Features" setting item and press the Enter key to enter; Set "Boot Up Floppy Seek" to "disabled" to turn off boot software detection.

3. There is a problem with the hard disk.

Solution: Detect the bad sectors of the hard disk, shield the bad sectors, or replace the hard disk directly.

A computer is a machine that uses electronic principles to process data according to a series of instructions. A computer can be divided into two parts: a software system and a hardware system.

The first computer was the ENIAC general-purpose electronic computer born at the University of Pennsylvania in the United States on February 15, 1946.

People refer to computers without any software installed as bare metal. With the development of science and technology, some new types of computers have emerged: biological computers, photonic computers, quantum computers, etc. On May 24, 1954, the transistor electronic computer was born.

The first generation of computers had a very limited variety of input and output devices. The usual input device is a card reader that punches cards, which is used to import instructions and data into memory; The output device used to store the results is typically tape. With the advancement of science and technology, the abundance of input and output devices has been improved.

Take a personal computer, for example: the keyboard and mouse are the main tools for users to input information directly into the computer, while monitors, printers, amplifiers, and headphones return processing results. In addition, there are many input devices that can accept other different kinds of information, such as digital cameras that can input images.

Among the I/O devices, there are two categories that are worth noting: the first is secondary storage devices such as hard disks, optical discs, or other devices that are slow but have a high capacity. The second is computer network access devices, through which the direct data transfer between computers greatly enhances the value of computers.

Today, the Internet has enabled tens of millions of computers to transmit various types of data to each other.

Press F2 to enter the settings screen, and in the first basic settings, change Floopy Drive to Disabled or Diskedde A: to None or Disabled. Then the f10 store is withdrawn.

It should be fine.

There are three ways to turn off the F1-F12 function keys:

Close directly via a notebook keyboard shortcut.

On Lenovo laptops, press the "FN+ESC" key at the same time to turn off the F1-F12 function keys.

Use the "Move Center" setting the function key to turn off the multi-key key.

1. Right-click in the start menu and find "Move Center" in the drop-down menu.

2. After entering the mobile center, set the function key to "multi** key".

Set the off function key by going into the motherboard BIOS options.

1. Restart the Lenovo notebook and press the "Delete" key to enter the BIOS.

2. Find the "Configuration" menu in the selection column above the BIOS, select the "HotKey Mode" option below, set it to "Disabled", save and restart the computer, and then you can turn off the function key.

What does the landlord want to do? Pressing F10 should be saved in CMOS! Do you want to reinstall the system? If you want to reinstall the system, you don't need to press F10! It is recommended to use a USB flash drive to complete the reinstallation of the system.