Stupid and unclear, how to distinguish between solid wood furniture and solid wood veneer furniture?

Solid wood furniture and solid wood veneer furniture can be distinguished by the following points: observe the wood grain inside and outside the furniture and the position of the splicing joints, observe the natural degree of texture connection of the furniture section, and explore the weight of the furniture. <>

The value of solid wood furniture and solid wood veneer furniture is very different. Solid wood furniture refers to all the parts used in the production process of the furniture are made of solid wood, while solid wood veneer furniture refers to the use of other non-solid wood raw materials as the base material, and then covered with solid wood sheets on its surface. From the point of view of value, the value of solid wood furniture is far greater than the value of solid wood veneer furniture.

Because solid wood veneer furniture sometimes uses very inferior base materials in order to save costs, it also leads to solid wood veneer furniture is relatively less durable. <>

Solid wood furniture and solid wood veneer furniture can be distinguished by surveying the appearance. When buying furniture, pay special attention to the interior of the furniture, the plates and the patterns at the joints. If the texture of the furniture from the outside to the inside can not be corresponded, then this furniture is solid wood veneer furniture.

If the interior of the furniture, such as the inner and upper walls of the drawers, and the top of the inner wall of the table, does not match the color and texture of the wood, then it can also be concluded that it is solid wood veneer. You can also use the method of observing the solid wood grain, if the wood grain, there are improper fracture marks in the middle, then you can judge the furniture is solid wood veneer furniture. <>

Feeling the weight directly on small pieces of furniture is also an intuitive way to detect them. In general, the weight of solid wood furniture is usually higher than that of solid wood veneered furniture. Because of solid wood veneer furniture, in order to save costs in the production process, the base material with slightly worse quality will be basically used.

These materials are less dense and lighter than solid wood, so if you perceive that the furniture is too lightweight, it is likely that it is made of cheap board veneer. If you want to avoid buying solid wood veneer furniture, you should pay attention to going to a formal furniture center, and don't be greedy for a small bargain.

Solid wood furniture and solid wood veneer, the biggest difference is that one is the whole, the other is the wood grain, solid wood furniture is generally a wood-based panel, on the surface of a layer of solid wood veneer.

Solid wood has a natural texture, which is not very regular and neat, and has a special natural wood fragrance. The surface of the veneered furniture is very smooth, the grain is very regular, and there is no smell of wood.

The whole whole of solid wood furniture is made of solid wood, but the surface of solid wood veneer furniture is made of a layer of sticky stickers, laminated.

Solid wood furniture is higher than veneer furniture, solid wood furniture is made of real wood, and veneer furniture is made of a layer of veneer and compressed wooden version, the weight of solid wood furniture is higher, and solid wood furniture is more beautiful than veneer furniture.

Many people think that wooden furniture is very simple, and putting a few wooden tables and chairs in the living room can improve the grade of the whole space, especially pure solid wood furniture. However, due to the lack of understanding of solid wood furniture, it is impossible to buy real solid wood furniture, and may use sticky solid wood furniture to camouflage. Look at the chromatic aberration.

Nowadays solid wood furniture rarely has a complete material, it is joined together, so the color of solid wood furniture may also be different. If the color is the same, it may be mottled or fake.

Both inside and out. The color inside the real board will not be too different from the color outside, you have to look at the inside of the drawer like a cabinet, the color is about the same as the outside, and vice versa. This is evident when you look at the bottom seam on the ground.

The external pattern is very neat and there is no breakage, so it is necessary to paste the leather solid wood furniture, because pure solid wood furniture will not have a very complete pattern, if the solid wood business is pressed on a layer of solid wood veneer, this is also to fool you, so don't believe it. Because unless it is waste wood, that is, solid wood, the effect will be much worse. Generally speaking, good solid wood furniture will use mortise and mortise craftsmanship rather than drilling holes like this, so you can further confirm that it is not real solid wood furniture.

Real wood, the gloss is different from different angles. Sticky solid wood furniture is definitely incomparable to pure solid wood, and it is lower, so be sure to keep your eyes open when buying. Generally speaking, the texture of the front and back of the panel is the same, the texture and the frame surface are frontal, usually belonging to pure solid wood furniture, on the other hand, it is veneer furniture, and the feel of solid wood furniture is rougher, the feel is more textured, the feel is smoother A lot of veneer furniture, and the color is better than pure solid wood furniture, and the veneer color of the furniture is also the same.

The durability of solid wood furniture is relatively high, it is not easy to get wet, and the texture is relatively clear, and the veneer furniture is easy to peel off and rough to the touch; It can be determined by whether there is a scar, good solid wood furniture has a certain scar, while veneer furniture does not.

It can be judged by the symptoms, judged by the color, and the best way is to determine the sound of the wood by tapping.

Solid wood furniture is very heavy, the pattern is not neat, the veneer furniture pattern is neat and uniform, and the weight is lighter; Compare the pattern and color, whether there is a big difference.

Nowadays, there are many types of solid wood furniture on the market, and you should choose carefully when buying. How to distinguish between solid wood furniture and solid wood veneer furniture? PChouse will take you to find out.

There are still the following differences between solid wood furniture and solid wood veneer furniture: wood veneer - wood grain, wood rays are clear. There are natural blemishes.

Because the veneer has a certain thickness (, when making furniture, when encountering two adjacent interfaces, they usually do not turn, but stick one piece each, so the wood grain at the two interfaces should not be connected. Solid wood – wood grain, wood rays (if any, usually "needles") are clearly visible, and there should be some natural imperfections (knots, spots, etc., black lines, etc.). For the same piece of solid wood, whether it is a plank or a strip, the wood grain at the interface between the two sides should be able to clearly see the natural connection between the longitudinal section and the cross-section (solid wood furniture, the natural connection of the wood grain at the junction).

There is a natural color difference on the surface of all solid wood furniture, and there will be certain differences in its color and texture. If the texture, color, and material of the solid wood itself are very good, and the material selection is excellent, veneer is generally not needed. Veneers often mean "facelift", which also means that products with good color and material, and no skin stickers, are usually more valuable.

All solid wood furniture, no splicing of the whole wood) In addition, there are stickers on the market, imported wood grain stickers look no big difference from wood veneer, wood grain, wood rays are clearly visible, if it is imported high-grade paper, even wood flaws can be imitated, but there is still a difference with natural wood veneer, it seems more fake. Sticker furniture is prone to revealing flaws in the corners. In addition, due to the small thickness of the wood grain paper, it will be directly wrapped at the junction of the two planes, resulting in the wood grain at the two interfaces being connected.

To determine whether the furniture is solid wood or veneer, you can observe the wood grain, distinguish the taste, observe the internal material, observe the process, etc.

1. Observe the wood grain. At present, solid wood raw materials are expensive and less and less, and many areas are restricted from cutting down, so generally speaking, many solid wood materials used in solid wood furniture are solid wood processing boards, and the wood grain is not continuous. Therefore, if the wood grain of a large area of components is beautiful and symmetrical, it must be non-solid wood furniture.

Especially be careful with the furniture that comes in a set.

2. Distinguish the taste. The smell of solid wood furniture is generally not too strong, not pungent, and has the smell of natural wood. The third is to observe the natural defects of wood.

Look at the location of one side with scars and knots, and then look for the corresponding pattern on the other side. If it is asymmetrical, it must be non-solid wood furniture.

3. Observe the inner material. Some furniture will be equipped with hinges, hooks, handles and other parts, which can be removed and observed whether they are solid wood through the joint between these parts and the substrate.

Fourth, observe the process. Generally speaking, in order to express the real texture of wood, manufacturers will generally only coat the surface with varnish or matte paint. Wood-based panel furniture is generally a box structure connected by hardware, when buying furniture, observe the connection between the furniture board and the board, if you see a three-in-one eccentric connector, etc., it is likely to be wood-based panel furniture, need to pay attention.

Furniture is an indispensable part of home decoration, and the thing to do after the house is renovated is to choose furniture. Solid wood furniture is deeply loved by consumers because of its beauty and practicality. However, the solid wood furniture sold on the market is not all solid wood, and in order to make greater profits, merchants often sell veneer furniture as solid wood furniture.

As consumers, how should we distinguish between veneer furniture and solid wood furniture when choosing furniture?

How to distinguish between veneer furniture and solid wood furniture

1. The difference between the two

There are many modern panel furniture finishing materials, among which veneer and stickers are very commonly used, but the grade is completely different. Veneer furniture is rich in natural texture, beautiful and durable, but relatively high, while sticker furniture is easy to wear, afraid of water, and unbearable to collide, but it is cheap and belongs to popular products. Some furniture varieties with little wear and tear and not close to water sources are currently dominated by stickers, such as shoe cabinets, bookcases, etc.

2. The stickers are different

When customers visit the furniture store, they will see instructions such as "walnut base cabinet", "cherry wood coffee table", "beech dining chair" and so on. At this time, it is very important to figure out whether it is solid wood, veneer or sticker. Solid wood and veneer can be called "cherry wood furniture", but stickers can only be called "cherry wood grain furniture", otherwise it is a mixed move.

3. Solid wood, wood grain, and wood rays are clearly visible

More or less there should be some natural blemishes (knots, spots, etc., black lines, etc.). For the same piece of solid wood, whether it is a plank or a strip, the natural connection between the longitudinal section and the cross-section should be clearly visible in the wood grain at the interface between the two intersections. Because the veneer has a certain thickness (left and right), when making furniture, when encountering two adjacent interfaces, they usually do not turn, but stick one piece each, so the wood grain at the two interfaces should not be connected.

4. Stickers, wood grains, and wood rays are clearly visible

Even imported high-grade paper can be imitated even if it has wood defects, but it is still different from natural veneer and looks fake. Sticker furniture is prone to revealing flaws in the corners. In addition, the thickness of the wood grain paper is very small (, it will be directly wrapped at the junction of the two planes, resulting in the wood grain of the two interfaces being connected (usually longitudinal sections).

The above is the introduction of the identification method of veneer furniture and solid wood furniture brought to you by the small class, I hope that through the introduction, you can identify by yourself whether the furniture you want to buy is really solid wood or veneer. Veneer furniture is often pasted on the surface of a layer of wood, if this layer of veneer does not fall off, it will seriously affect the aesthetics, and because the veneer furniture is not made of solid wood, its quality is often not so good, you may be troubled by quality problems in the later stage.

You can get it for free