Wubi typing, some words have an end code

The last one is called the identification code, such as "township", and the five strokes are the identification code.

It is an identification code, such as the word "code", which is encoded as DCG, and G is the identification code.

The last pen identification code is to see the structure of the word, such as the word "reference", the last pen is the apostrophe, because it is "up and down structure", so the identification code should use the second letter of the "apostrophe" area, so it is "r", if the word is left and right structure, the last pen is apostrophe, the identification code only uses "t", if it is a single font, the last pen is apostrophe, the identification code has to use "e".

In the same way, if the last stroke is vertical, the left and right structure of the word, such as "rod", it will be split into s (wood) f (stem) plus the identification code: "h", if the word is up and down structure, such as "Qin", it must be split into s (west) j (early) plus the identification code j (the last stroke is vertical, up and down structure, j is the second letter of the vertical area), the last stroke of the single font is vertical, and the identification code is k

The full name of the five-stroke identification code is the five-stroke last stroke cross identification code.

The purpose of the identification code is to distinguish between Chinese characters that are composed of different roots on the same key, or Chinese characters with the same root but different structures.

How to use the identification code: first consider the last stroke (last stroke) of the Chinese character, so as to determine the area where the identification code to be added is located (horizontal, vertical, apostrophe, 捺, fold), and then consider the structure of the Chinese character (left and right, up and down, heterozygous), so as to determine the position of the area where the identification code is added (the first, the second, the third).

Such as: incense (root code tj). But under normal circumstances, the word "de" comes out. In order to play "incense", you need to add an identification code.

Since the end of the word "incense" is "one" (horizontal), it can be determined that its identification code is found in the horizontal area.

Secondly, since the structure of the word "incense" is "up and down", it can be determined that the identification code should be the second key (f) of the horizontal me.

Therefore, the complete code of the word "incense" is: tjf.

The principle of adding identification codes:

1. Only words less than four roots need to be identified. That is, the root word (first hit the key where it is located, and then hit its first, second and last strokes in writing order), the key name (hit the key it is four times in a row), do not need to add the identification code, or if a Chinese character is separated from more than four roots, such as "I" (丿, 扌, B, ,, 丿), "cold" (宀, two, 刂, one, eight, , , ), there is no longer a need to add the identification code.

2. When a single stroke (一,丨,丿,,b) intersects and connects with other roots, the word should be regarded as a hybrid structure.

For example: "lack", the split root is: 丿, zhi, but because the single stroke "丿" is connected with the word "zhi", it must be regarded as a heterozygous structure, so as to determine the identification code as "i"."

Another example: "Township", the split root is: 纟 (the last mention must be removed), 丿, but because the single stroke "丿" is connected with "纟", it must also be regarded as a hybrid structure, so as to determine its identification code as "e".

Another example: "Jun", the split root is: 彐, 丿, mouth, but because the single stroke "丿" and "彐" intersect, so "Jun" must also be regarded as a hybrid structure, so as to determine its identification code as "d".

However, if a single stroke and the root are neither connected nor intersecting, they must be treated normally.

Such as: "Dan", upper and lower structure, "old", left and right structure.

3. The root of the word is connected to the root of the word, which is the upper and lower structure; The root intersects with the root, and the hybrid structure.

For example: "look, look", the upper and lower structure, and "hit, out, inside" is a hybrid structure.

4. For Chinese characters with fully enclosed and semi-enclosed structures such as "辶, 廴, 囗", the last stroke of their last stroke must take the last stroke of the encircled structure, not the last stroke of these partial strokes. This is to improve the efficiency of identification codes and reduce the repetition rate.

Such as: even (lpk), round (lkmi).

5. The four Chinese characters of "nine, dagger, knife, and force" are uniformly specified as "B" (fold) when participating in the recognition.

The selection of the identification code is determined by the last stroke of the root of the Chinese character and the font of the Chinese character after the Chinese character is split. The order of entering the words that need an identification code is as follows: first type the root code, and then add an "identification code".

There are 5 basic strokes in Wubi, one (horizontal), 丨 (vertical), 丿 (apostrophe), (捺 and point), B (fold), these five strokes. Rules for determining identifiers:

1. The last stroke of each word must be the five strokes mentioned above.

2. Wubi divides the font into three structures: the left and right structures are identified by 1, the upper and lower structures are identified by 2, and the hybrid structures are identified by 3. For example:

The last stroke is "one", (left and right structure, identified by the first letter of the horizontal area, g.) The upper and lower structures are identified by the second letter of the horizontal area. The heterozygous structure is identified by the third letter of the transverse region d) and so on.

3. The horizontal area is GFDSA, the first three are the identification code 1G2F3D, the vertical area is HJKLM, the first three are the identification code 1H2J3K, the TrewQ area is TREWQ, the first three are the identification code 1T2R3E, the area is Yuiop, the first three are the identification code 1Y2U3I, the folding area is NBVCX, and the first three are the identification code 1N2B3V.

The final pen identifier is only available for Chinese characters that are less than 4 yards and is determined by the stroke type and font type of the last stroke of the Chinese character.

How to play general Chinese characters: the first root of the Chinese character + the second root + the third root + the last root (split according to the splitting law, four or more Chinese characters).

The principle of splitting Chinese characters with less than four yards: the first root of the word + the second root + the third root (if there is no third root, do not take) + identification code.

Each Chinese character can only have a maximum of 4 Wubi **, and the rules are , and the rule is , the end. If there are less than 4 roots after the Chinese character is split, enter another identification code after all the roots are entered. The identification code looks at the stroke at the end of the Chinese character, which can be divided into horizontal, vertical, apostrophe, pinch, and fold the end, which correspond to the keyboard.

The first, second, third, fourth, and fifth areas are equipped with three identification codes in each area, and the structure of Chinese characters is divided into left and right structures, upper and lower structures, and other structures, which correspond to the key identification codes in the first to five areas. Such as the word "left", split into da two **, the identification code is: the last stroke is horizontal, so the identification code is in the first area, is the upper and lower structure, so the identification code is the second key in the first area, that is, f is the identification code.

Another example is the word "Chong", which is split into three ** of ukh, and the identification code is: the last stroke is vertical, so the identification code is in the second area, which is the left and right structure, so the identification code is the first key in the second area, that is, h is the identification code. Left daf, rushing ukhh

Wubi Identification Code: The full name is Wubi Last Stroke Cross Identification Code.

The last stroke identifier is determined by the type and font of the last stroke of a Chinese character. It only works with Chinese characters that are less than four yards. The Wubi input method divides the root into five areas, that is, the root with "一" as the first stroke is divided into 1 area (GFDSA); The root of the first stroke with "丨" is divided into 2 zones (hjklm); The root of the first stroke is divided into 3 zones (trewq); The roots of the first strokes are divided into 4 zones (yuiop); The root of the first stroke is divided into 5 zones (nbvcx).

Note that this rule only applies to about 75% of the roots).

The Wubi input method divides the structure of Chinese characters into three categories: the left and right type, including the left, middle and right type, and the code is represented by the number "1"; The upper and lower types, including the upper, middle and lower types, are coded with the number "2"; The parts that cannot be clearly divided into the upper and lower types and the left and right types are divided into heterozygous types, and the code is indicated by the number "3". The last stroke identification code area code is composed of the last stroke code and the structural code of the word.

For example, the word "forbearance", its five-stroke code is vynu. So why is it a "U"? This is because:

The last stroke of "Shinobi" is ", and the "dot" is located in Zone 4; Its structure is up and down, and the font code is 2; "4" and "2" together is the identification code of the word "forbearance" area number 42, that is, the second key of the 4 area, the letter key of the 4 area is yuiop, and the second key is "u", so the identification code of the word "forbearance" is "u".

Another example is the word "moving", its last stroke is "fold", and "fold" is located in Zone 5; Its font structure is left and right, and the code is 1, so the identification code of the word "moving" is 51, and the first key in the 5th area is n, so the identification code of "moving" is "n".

Another example is the word "Hui", its last stroke is "one", located in area 1, the font structure is heterozygous, and the code is 3, so its identification code area number is 13, that is, the third key in area 1, the key in area 1 is GFDSA, and the third key is "D", so the identification code of the word "Hui" is "D". And so on.

The Last Stroke ID can only be applied to Chinese characters that are less than 4 digits, which is determined by the stroke type and font type of the last stroke of the Chinese character.

Typing of general Chinese characters: the first root, the second root, the third root, and the last root of the Chinese character (Chinese characters are divided into four or more codes according to their separation).

The principle of dividing Chinese characters below four codes is: first root + second root + third root (no third root is allowed) identification code.

The confirmation of the last pen identification code should be combined with the font structure.

The five basic strokes of Chinese characters:

Horizontal "one", vertical "丨", apostrophe, "丿", 捺 (point)", ", fold "".

Distribution of the five basic strokes:

Horizontal strokes – G, F, D, S, A, are called Zone 1.

Vertical pencil – H, J, K, L, M, is called Zone 2.

Skimming the pen – T, R, E, W, Q, is called Zone 3.

Pick up the pen – Y, U, I, O, P, and call it Zone 4.

Fold up the pen – N, B, V, C, X, called Zone 5.

Three font structures:

Left and right type - such as, Liu, tree, research ......

Up and down type - card, research, actual, sound ......

Heterozygous - un, end, string, ......

The three font structures are in each area, starting from the first letter key, and are left and right (represented by the number **1), up and down (represented by the number **2), and heterozygous (represented by the number **3).

How to confirm the last pen identification code of Chinese characters:

The location of the last stroke** + font structure**.

Example: Put - RCN

1. The root of the word "扌" - r

2. The root of the word "bar" - c

The last pen of "Ba" is "乚", the key position of the folded pen is the beginning of the 5th area N, and the font structure of "put" is left and right (the number is represented as 1).

The last digit of "put" is 51 (i.e., the first key in the 5th area) - n

Scoop – EVF

1. The root of the word "爫" - e

2. The root of the word "mortar" - v

The last stroke of "mortar" is "一", the key position of the horizontal pen is the beginning of the G in the first area, and the font structure of "scoop" is up and down (the number is represented as 2).

The last stroke identifier of "scoop" is 12 (i.e., the second key in the first area) - f

Fork – CYI

1. The root word "again" - c

2. Root "", "-y

"is the root of the word, and the last stroke is the root of the word. The key position of the dot (捺) is the 4th area, and the font structure of the "cross" is heterozygous (the number is 3).

The last stroke of the "cross" is 43 (i.e., the third key in the 4th area) - i

Wubi Identification Code: The full name is Wubi Last Stroke Cross Identification Code.

According to the last stroke of the Chinese character, if the last stroke is horizontal and left and right structure, then hit g, if the upper and lower structure is f, if it is an enclosing structure, hit d, such as Dan jgf, because the last stroke is horizontal, and because it is an upper and lower structure, so it is f, and then for example, tan fjgg, because the last stroke is also a horizontal left and right structure, so it is necessary to hit g, and then for example, solid ldd, the last stroke is a horizontal surrounding structure, so it is d, if the last stroke is vertical, you have to go to the vertical area to find the left and right to hit h, up and down to hit j, and the same reason as k, and other similarities.

For example, 12345 9In 678 I can not enter you will also know that I entered 123456789

Look at this in more detail.