Hengyu mobile phone screen is locked What key to press to flash the phone

Enter the flash mode method.

Method 1: If the phone is powered on, please turn it off first, and in the case of power off, press and hold the power (hang-up button) + small house (home) button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Flashing method steps:

Card swiping: Use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

Press the power key and volume up at the same time to enter recovery

You don't need to flash the machine to double clear.

The steps are as follows:

After that, click Flash Now, and then it's time to wait, wait for the software to prompt that the flashing is complete, and it's OK.

Hello,Install the flash client,Recommend the line brush,If you want to solve the problem of the screen being locked,Flash the corresponding rom。

The hard grid doesn't respond, isn't it something to press restart first, and then an exclamation point appears, and then press those buttons, that step?? View the original post

You can try the double-clear phone, but the data of the phone's personal settings will be cleared. Enter recovery mode (recovery mode). Generally, after the Android phone is turned off, press and hold the volume "-" plus power button, and press and hold it for 3 seconds at the same time to enter recovery mode, and after entering recovery mode, execute "wipe data factory reset" and "wipe cache partiton" to clear some previous system configurations and caches.

In this interface, the volume button is used to move up and down, and the power button is confirmed. Select "Reboot System Now" to reboot your phone.

1.Turn off your phone, 2After a complete shutdown, press and hold the power button and volume at the same time - (some are volume +) to enter the double clear mode, 3Select [Clear Phone Data] (some display words such as English clear), (when entering this mode, the touch screen operation is invalid, Volume + is up, Volume - is down, Home button is OK), 4Select up and down OK to delete all data, it will enter the automatic clearing mode, wait a few minutes, the phone will automatically restart after the phone is cleared, some phones will not restart automatically, just restart by themselves, and then you can enter the phone normally.

Mobile phones are an indispensable part of our lives, in many aspects of life also need to use mobile phones, payment, ordering, work and study, etc., now mobile phones pay more and more attention to privacy and security, so they will set up passwords, so that only enter the password before use, greatly improve security, but some careless friends may forget the password, so in the case of not knowing the password, how to flash the Android phone? Here's a brief introduction.

The first method is relatively fast, but it can't keep the data in the phone, so some important files should be backed up in advance. The first step is to turn off the mobile phone, some mobile phones need to turn off the password, you can first consume the power to automatically shut down and charge before operating. Then press and hold the volume + button and the power button together, and after about ten seconds of long pressing, the phone will enter recovery mode.

After entering the recovery mode, choose to erase all phone data, this option is equivalent to a factory reset. After the phone is cleared, you can use it directly by turning it on. Since Android is developed by Google, most Android phones are still displayed in English in recovery mode, so finding the right option is crucial.

The user needs to find the wipe data factory reset option.

So what exactly are the recovery mode and fastboot mode just mentioned on Android phones? In fact, both of these modes belong to the flash mode, and the parameters of the phone can be changed. Many people think that flashing is a very difficult thing, but it is actually very easy!

When there is a problem with our mobile phone system, or we want to replace a third-party system, we can solve it by ourselves, we don't need to go to a mobile phone repair shop, spend money and spend time, and we have a sense of accomplishment by doing it ourselves.

The fastboot mode is a mode that connects the computer with a data cable and operates the flashing mode on the computer, which is a more rigorous flashing mode than recovery. And compared to card swiping, it is safer and more convenient. If we say that the mobile phone system is damaged due to improper operation during use and cannot be turned on, then don't worry, as long as you can enter fastboot mode at the end, you can still save the phone.

But if you can't access fastboot, then the average person may not be able to do anything but send it to the phone store for repair. The method of line brushing is simpler. Now there are a lot of flashing software, such as flashing elves, etc., there are flashing packages of various models of mobile phones, as long as the mobile phones are not particularly unpopular, they can be found, and then the mobile phone is turned off to enter this mode, connected to the computer, and the above steps can be operated according to the flashing elf.

The above is about how to flash Android phones? Introduction to the method of flashing the phone without knowing the password, if you have friends who forget the password and are ready to flash it, you can try it, I hope it will help you.

Don't worry if you forget the phone screen lock, teach you how to flash your phone at home and how to clean up your data.

What should I do if I forget my phone password?

Android phone lock screen password forgot to deal with: when setting the lock screen password graphic, the system will ask to set a backup password or password problem, such as forgetting the password can be unlocked through the previously set password problem or backup password, if it still cannot be unlocked, it can be solved in the following ways: 1. Contact the terminal manufacturer or customer service to assist in unlocking processing; 2. If you have previous experience in flashing, you can also try to clear the original lock screen password through third-party flashing software (flashing wizard, etc.).

However, there is a risk in flashing, so it is recommended to contact the manufacturer's customer service to avoid unnecessary losses.

It's good to go into recovery and double wipe down. C8655 generally enters recovery by holding down the volume plus and power button for ten seconds, and it is best to turn off the fast start.

Of course, after double WIPE, the software under your SMS ** is gone.

Turn off the phone, press and hold the volume up and on buttons until you enter a triangle + exclamation point interface, then enter the official recovery.

1. First, use the volume button to select the third item, wipe data factory reset has two options: no and yes - delete all user, select yes

2. Press the shutdown button to enter the third item, select yes with the volume button, confirm the shutdown button, and then wait for the system to be formatted.

3. Then select the first item, Reboot System Now, restart the phone to unlock it, and you don't need to download the ROM package.

There are a lot of specific information on the Internet to find it.

I suggest that you rule out the system software first, if it is electromechanical separation, you can take off the battery and start it from the safety to see if it is useful. Restore, restore, and see if this phenomenon still exists. If also.

1.Shuangqing data can solve such problems; Press and hold the power button and volume down (some press plus)2Reinstating the appearance settings can solve this problem;

3.Flashing the machine should solve the problem completely;

4.If none of the above works, then you can send it in for repair.

The old does not go, the new does not come ... Let's change it.

Hello! It is recommended that you take a look at the forum, which will have the flashing tutorial you want.

Shut down, then press off to build, and reduce the sound.