-
2: Then copy it to the root directory of the SD card of the mobile phone, if you use a data cable to connect to the computer, you can directly put it into the root directory of the SD card of the mobile phone through the data cable. (Note: It must be the root directory, otherwise it cannot be flashed).
3: When the phone is turned off, press and hold the volume up button + power button (that is, the power button) at the same time, and don't let go, wait for the phone to vibrate and display the nubia icon, release the power button, keep the volume up button, and after a while, the phone enters recovery mode.
4: Then press the volume up and down keys to move to "Apply update from sdcard", if there is no such item in recovery, then select "apply update from external sdcard", press the power button to confirm.
5: Then select 'File' in the list that appears, and press the power on button to confirm, after which you will start flashing.
6: After about 1 2 minutes to complete the upgrade, go back to the main interface of recovery to factory settings, that is, press the volume button to select Wipe Data Factory Rest Press the power button to confirm, then select yes - delete all data, and press the power button to confirm.
7: Finally, select Reboot System Now in the Recovery interface and restart your phone.
-
ZTE does not have a win10 system, but it is not certain that no one will make a third-party win10 flash package in the future,
-
1: Copy the ROM flash package loaded in the remaining trace to the root directory of the SD card of the phone. Here's how:
Turn on the phone, pull down the top, connect to the computer in storage mode, a removable disk will appear in the My Computer Disk directory, and then copy the ROM package in zip format to the removable disk. 2: After copying the file, put the phone vertically into Chinese recovery mode.
How to enter recovery: Press and hold the power button and the volume up button at the same time in the shutdown state, let go of the power button immediately after the phone is turned on and vibrate, and keep the volume up and down until you enter the recovery interface, (if you can't get in, try a few more times).
3: First use the volume button in the interface to select "Empty Data Restore to Factory Settings", the power button is OK, enter the next interface, that is, select the middle is, clear all data, OK.
4: This step officially starts to swipe, select install zip flashing package, then select install zip from the sd card, find the zip package in the sd card of fangzhou zheng, select it to confirm, open the brush.
5: After brushing, there will be a prompt in the phone, the prompt is "Installed from the SD card", then return to the main menu, select the first item, just restart the phone, pay attention to some ROM bags with restart scripts, and it will automatically restart directly after brushing.
ZTE U793 Preparation before flashing:
1. Check whether there is a problem with the SD card of the mobile phone and whether the capacity is sufficient; >>>More
Well, it's okay, it's just too expensive.
It is highly recommended that you go to a mobile phone store to swipe. >>>More
Summary. Hello dear, I am very happy to answer for you. If your Xiaomi phone can't boot normally or can't access the original data after being flashed, you can try to recover it by the following methods: >>>More
How to swipe the bus card with the NFC function of the mobile phone: >>>More