Is it OK to apply potassium sulfate fertilizer to honeysuckle in the rejuvenation stage?

<>Yes. The growth and flowering of honeysuckle need suitable nutrients, not only to ensure that the nutrients are sufficient, but also to avoid the damage caused by fertilization to the plant, and it is the key to master the taboos of honeysuckle fertilization. The fertilization of honeysuckle should pay attention to stop fertilization in summer and winter, avoid excessive fertilization, avoid rootless fertilization, and only in this way can honeysuckle have a good growth.

Fertilization of honeysuckle is contraindicated.

1. Stop fertilizing in summer and winter.

In the contraindication of honeysuckle fertilization, the growth of the plant will also be affected by the temperature in summer and winter, and the plant will enter the dormant period at this time, and the demand for nutrients will be greatly reduced. In order to avoid fertilizer damage caused by fertilization, fertilization must be stopped in summer and winter.

2. Avoid excessive fertilization.

In the process of fertilizing honeysuckle, it is necessary to master the principle of seeing dry and wet, and choose thin liquid fertilizer for sprinkling, once the fertilizer is too much or the fertilizer concentration is too high, it will cause fertilizer damage and burn the roots of the plant, thus affecting the normal growth of honeysuckle.

3. Avoid rootless fertilization.

In the process of cutting honeysuckle, the plant cannot absorb nutrients at this time, but will cause composting, resulting in the failure of cuttings. In general, after the cuttings are completed, they should be maintained for at least a month, and only after the roots of the plants have fully grown can some thin liquid fertilizer be applied.

4. It must be watered after fertilizer.

The fertilization of honeysuckle needs to be watered once, so that it is conducive to the absorption of nutrients by the plant, so that it can penetrate better and achieve twice the result with half the effort. If not watered in time, it may affect the normal growth of the plant.

5. Avoid applying too much nitrogen fertilizer.

Nitrogen fertilizer is the key element to promote plant growth, in the process of cultivating honeysuckle, only need to apply a small amount of nitrogen fertilizer in spring, and the plant flowering period should be dominated by phosphorus and potassium fertilizer. Excessive nitrogen fertilization is not conducive to the growth of plants, and it is easy to cause plants to grow.

Yes, and after each stubble of flowers, you need to pinch your head and hit the top, fertilize and water.

Honeysuckle can be sprayed with potassium dihydrogen phosphate foliar sprays in April.

There are four major ways of using phosphorus and potassium dihydrogen acid

1. Soak and mix seeds.

Wheat dressing is about to begin. About 200g of potassium dihydrogen phosphate per mu, mixed with an appropriate amount of water, so that the solution is 7 cm higher than the seeds, soaked for 10 to 20 hours, and then sown after drying. The soaked seeds can also be mixed with acidic pesticides.

If you use potassium dihydrogen phosphate to dress seeds, 50kg of seeds should be mixed with water to 3 kg, sprayed evenly on the seeds with a sprayer, and turned in time. After spraying, the seeds are sown after 2 hours and dried. The treated seeds can promote the early emergence of seedlings, increase the number of roots and the number of sins, and make the plants grow robustly.

2. Irrigation and dipping roots.

Irrigation of roots with 1:1500 potassium dihydrogen phosphate solution can be used as a available phosphorus and potassium fertilizer to coordinate the effectiveness of nitrogen fertilizer, increase grain weight and increase yield.

Dipping the roots of crops with potassium dihydrogen phosphate aqueous solution can promote slow seedlings and easy rooting.

3. Foliar spray.

Wheat, rice and other grain crops in the rejuvenation stage, booting stage, early flowering Zheng Qi stage, grain filling stage each spray 1 time, each mu with about 200g of potassium dihydrogen phosphate, mixed with 30 kg of water, evenly sprayed on the stems and leaves of crops.

Peanuts, soybeans, sesame, etc. in the flowering stage, pod-setting stage, and full fruit stage, spray with 50 grams of potassium dihydrogen phosphate each time, mixed with 15 to 20 kg of water;

Fruit trees, vegetables, melons and fruits, etc., in the flowering stage, young fruit stage, and fruit expansion stage, spray with 50 grams of potassium dihydrogen phosphate each time, mixed with 15 to 20 kg of water; It can promote plant metabolism, early maturity, enhance photosynthesis and chlorophyll content, promote grain fullness, improve fruit sweetness, drought resistance and high temperature resistance.

4. Bottom fertilizer. Apply 8 to 12kg of potassium dihydrogen phosphate per mu, with an appropriate amount of nitrogen fertilizer, and no longer apply phosphorus and potassium fertilizer. Potassium dihydrogen phosphate should not be applied before land preparation, but should be applied after land preparation and before sowing.

Honeysuckle has been planted for many years, how to make it bloom more and bigger, in addition to pruning, reasonable and timely fertilization is also a very important link. Here's how I do it:

1. Bury some dry chicken manure (given by a flower friend) or bury a little pig manure next to honeysuckle in winter, which is the bottom fertilizer of the year, pay attention to the fertilizer must be made or treated. In addition, according to our friends who have planted honeysuckle in Huangshi, cake fertilizer and compound fertilizer are also very good choices. When burying, pay attention not to too much, I usually give a small cup (that is, a disposable cup) to a tree, and do not have direct contact with the roots;

2. After each pruning, the last time the liquid fertilizer was relatively thick, I generally used bean dregs and mung beans, red beans, soybeans, peanuts, broad beans, and peas at home to ferment in a bottle and then mix it with water. These beans are said to be better when cooked and then fermented;

3. Spray potassium dihydrogen phosphate once or twice after each flower bud, if you want to pick flowers to drink, you don't need to spray;

4. Use it with some waste at home when watering. For example, after drinking the yogurt, beer, and bean paddles at home, store the water after the container is cleaned, the waste oil connected to the range hood, and the rice washing water for three to five days, and wait until there is a slight sour taste, which can be used to water honeysuckle.

5. Some expired sugars such as brown sugar, cotton sugar, and glucose at home can be used in combination with fertilizer, but only a little at a time.

Note: Proper techniques should be used for watering in the following situations:

1. Try not to fertilize the seedlings of cuttings, only splash water before rooting, transplant as soon as possible after rooting, and fertilize normally after transplanting to restore growth.

2. Newly transplanted and repotted should not be watered.

3. Solid fertilizer should not be too much, except for the heavy fertilizer in winter, it is best to apply liquid fertilizer at other times.

4. Fertilization should not be applied in summer, but the acidic water after storage should be watered every day, especially when it is still flowering in summer, water must not be lacking.

4. Liquid fertilizer should be diluted before application, and water should be replenished in time the next day after fertilization.

In this way, the honeysuckle can grow as long as possible, and the longer it grows, the more beautiful it is.

1. Base fertilizer: The base fertilizer is applied during land preparation, mainly farmhouse fertilizer, compost and green manure, and it should be fully decomposed when using farmhouse fertilizer.

2. Top dressing: It is the key to the growth of honeysuckle, and the application of well-rotted farmhouse fertilizer or fast-acting nitrogen fertilizer in spring and summer can promote the vigorous growth of plants. Fertilization method:

Cover the fine soil and press it tightly after application, and water it once; In winter, reapply wax fertilizer, each plant is applied 5 10 kg of rotting manure or compost, 100 grams of ammonium sulfate, 200 grams of superphosphate, after full mixing, apply in the annular ditch around the mound, after the application of the cover soil compacted and watered to moisten, and finally cultivate soil roots around the mound, in order to facilitate wintering.

1.Honeysuckle spring top dressing, can be used to rot thin fertilizer or water and compound fertilizer liquid, honeysuckle grows rapidly in spring, vigorous growth, need to ensure that nutrients are sufficient, to ensure that good nitrogen, phosphorus and potassium elements are comprehensive and balanced.

2.Before honeysuckle pregnancy buds, potassium dihydrogen jujudate can be sprayed as foliar fertilizer.

3.Note that in order to make the fertilizer effect better absorbed, you can water the next day after applying fertilizer to promote the absorption of fertilizer effect, and also dilute the fertility to avoid fertilizer damage.

Hello in winter, honeysuckle will enter the dormant stage, when the growth of the plant becomes very slow, so the nutrient demand of honeysuckle is greatly reduced. In order to avoid fertilizer damage caused by fertilization, the fertilization of plants should be reduced in winter, and only need to apply phosphorus and potassium fertilizer once before winter.

When fertilizing honeysuckle, an appropriate amount of farmhouse manure or compost can be applied to supplement its growth and growth. When cultivating honeysuckle, it can be planted with sandy soil, humus soil and an appropriate amount of organic fertilizer to make nutrient soil. When honeysuckle begins to climb the vine, it is necessary to give enough light, bridge and water properly to ensure that the potting soil is in a slightly wet state, so that the honeysuckle can grow healthily.

How honeysuckle is fertilized.

When honeysuckle is cultivated, compost or farm manure can be applied, but it should be noted that the fertilizer should be fully decomposed before use. In the spring, nitrogen fertilizer can be applied to make it grow stronger, and water it once after each fertilizer. In winter, compost or rotten manure is applied.

Honeysuckle potting soil requirements.

To raise honeysuckle, we must first choose the right soil, to ensure that the soil is permeable, there are enough nutrients, and we can mix river sand, humus soil, pastoral soil, and an appropriate amount of organic matter to make nutrient soil. Before potting, a layer of small gravel should be laid on the ground of the pot, so that the honeysuckle can grow better.

Honeysuckle light needs.

During the growth of honeysuckle, it should be properly exposed to light and placed in a sunny place for maintenance, so that honeysuckle can receive enough astigmatism to promote its growth and development. Because the light is very strong in summer, it is necessary to take shade measures to avoid direct light for a period of time, which will cause some damage to honeysuckle.

Honeysuckle moisture requirements.

It is necessary to pay attention to reasonable watering during maintenance, to grasp the principle of seeing dry and wet when watering, to water according to the degree of dryness and wetness of the soil, and to ensure that the soil is in a moist state in spring, summer and autumn. In winter, it is necessary to ensure that the potting soil is in a dry and dry state, so that the honeysuckle can survive the winter.