What does it mean to have zigzag lines on both sides of a solid line

A zigzag line next to a solid high-speed line means that this lane cannot be changed. The zigzag line on the highway is a set of longitudinal deceleration markings parallel to the roadway dividing line, which is generally more common in the turning position, and the upper and lower bridge positions are also set. As the driver crosses the zigzag line, the lane slowly narrows in a subjective visual effect, which allows the driver to take the initiative to slow down.

Before driving, it is important to know the road information in advance. If the TV and radio are not timely enough, you can call the high-speed ** to inquire.

Especially in the foggy season, you should ask for directions in advance to grasp the accurate situation and avoid unnecessary trouble for yourself after the road is diverted. Highway closures are easy to accelerate, long-term energy concentration, fixed driving posture, monotonous operation, and can easily cause psychological and physical fatigue.

In addition, when the weather is bad, traffic accidents are more likely to occur. Therefore, when driving on the highway, it is generally necessary to take a break for about 2 hours of continuous driving to relieve fatigue and maintain a good mental state.

When driving on the highway, you will encounter a solid line with oblique jagged teeth on both sides, which is a bit like a fish bone, and the road surface will become smaller when you drive through. Many car owners will panic at this time and don't know how to go, especially some novice drivers. Let's take a look, what does this kind of marking mean?

There are many marking signs on the expressway, and each type of marking sign represents a different meaning, which is used in different places to bring different instructions to remind passing drivers. The above two sides of the toothed like a fishbone line marking, is a longitudinal deceleration line, can also be called a visual deceleration line, the main role is to remind the owner of the need to slow down in front of the car, otherwise there will be rear-end collision or other accidents. It may be installed in places such as tunnels, sharp turns, and ramp entrances and exits to prevent traffic accidents.

This kind of marking will visually give the driver driving on the road, feel that the road surface is getting narrower and narrower, according to the normal driver's thinking consciousness, the driver will slow down at this time, and observe the signs or signs on the side of the road. Therefore, this kind of marking can effectively remind the driver that the front is about to drive to a special and dangerous road section, and it is necessary to slow down the vehicle first, and then pay attention to the road situation.

But in any case, when encountering this type of marking, it is not allowed to change lanes, otherwise you will be deducted points and fines. If you are on a normal road, you will be deducted 3 points and fined 200 yuan, because there are not only such markings on highways, but also on other roads. If you change lanes on the highway, you will be deducted 6 points and fined 200 yuan.

And you also need to see if there are other illegal behaviors such as speeding.

Then the corresponding penalties will be imposed.

It is a variable lane.

It looks very different from other lanes, and it is basically the same, that is, there are many more diagonal lines on the inside of the lane, which are like zigzags, and this lane can be changed according to the traffic flow at the time, you can go straight, you can turn left, you can turn right.

It mainly means that the lane can change the direction according to the traffic flow, but there is a time limit, and the direction of traffic can not be chosen at any time.

Zigzag lines on either side of a solid line refer to variable lanes.

Zigzag road markings generally appear near intersections, and the main difference between this type of marking and the solid white line is that it has a jagged appearance, which is very easy to identify. Generally speaking, this type of lane will only be found in traffic jams, because it was originally designed to alleviate road congestion during rush hour. According to the flow direction of vehicles in different time periods, the flow direction of vehicles is regulated to solve the road congestion during peak hours.

Although this marking can alleviate road congestion during rush hour, it is also more demanding, so when entering this lane, be sure to follow the direction of the indicator light, even if it is not the route you want to take, and do not violate the rules. Secondly, after entering the variable guide lane, do not press the line, otherwise you will face a penalty of demerit points once you violate the rules.

Other road markings

1. Yellow dotted solid line.

When encountering the yellow marking, the dotted line can be pressed, the solid line can not be pressed, and the other side of the solid line is forbidden to cross the line. Therefore, if you encounter this kind of marking on the road, you must remember the yellow dotted solid line in the center, and it is forbidden to turn left and overtake across the line on the side of the solid line; On the dotted side, the bend is noisy, and vehicles are allowed to cross the line to overtake and turn left when it is safe to do so.

2. Prohibit the network cable.

This kind of road markings are generally set up at some special intersections or entrances and exits, if you want to park, see this kind of network cable, remember not to park the car in the network cable grid, once parked in the network cable grid, even if it is illegal parking.

3. Diversion line.

The diversion line is generally set up at the intersection, ramp or U-turn area, and it is forbidden to stop for the diversion line.

What does it mean to have zigzag lines on both sides of the dotted line?There are zigzag lines on both sides of the dotted line is the longitudinal deceleration marking line on the highway, which can be divided into transverse deceleration marking line and longitudinal deceleration marking, which is set up in the toll station square, exit ramp or other white dashed lines that require vehicle deceleration sections, and its form has single dashed line, double dashed line and three dashed lines, which are set perpendicular to the direction of driving. The longitudinal deceleration marking of the roadway is a set of diamond-shaped block dotted lines parallel to the dividing line of the roadway, which is usually located at the upper and lower bridge positions and turning positions, and the main function is to form a sense of oppression through the visual narrowing of the roadway, so that the driver can automatically slow down at the curve, ramp and other positions that need to be decelerated.

Whether you can change lanes under the deceleration markings also depends on the stool to see the state of the markings next to the deceleration markings, such as the sales travel Hongguo is a solid line, you can't change lanes, if it's a dotted line, you can change lanes. @2019

The function of the sawtooth line is to remind the owner to reduce the speed, because the sawtooth line is generally set up behind the frequent occurrence of filial piety, as well as the entrance of some tunnels. For the sake of safety, the owner needs to reduce the speed of the vehicle to ensure the safety of the vehicle.

The zigzag line on both sides of the dotted line on the highway is a longitudinal deceleration marking, which is a bit like a fishbone line, when driving through, it will make the driver have an illusion that the road surface is getting narrower and narrower, and then the owner will take the initiative to reduce the speed of the car.

It should be noted that if the line next to the deceleration marker is a dotted line, the owner can change the lane at this time, but when the deceleration marker is next to the solid line, it is not allowed to change the lane. If the owner changes lanes at will, there will be corresponding penalties, so when driving, the owner must see the line on the road clearly and do not violate the rules.

Precautions for high-speed driving:

1. The traffic from the ramp into the highway must be polite to others, turn signals, honk, and Qiaozu observation to confirm that it does not affect other vehicles before entering the highway lane.

2. Reasonable distance between vehicles is a prerequisite for ensuring the safety of both vehicles.

3. Overtaking is a very routine action, but you must pay attention to the distance between vehicles when overtaking on the highway, and you must lift your spirits in rainy days and oversized cars.