What does it mean to have zigzag lines on both sides of a solid line?

A zigzag line next to a solid high-speed line means that this lane cannot be changed. The zigzag line on the highway is a set of longitudinal deceleration markings parallel to the roadway dividing line, which is generally more common in the turning position, and the upper and lower bridge positions are also set. As the driver crosses the zigzag line, the lane slowly narrows in a subjective visual effect, which allows the driver to take the initiative to slow down.

Before driving, it is important to know the road information in advance. If the TV and radio are not timely enough, you can call the high-speed ** to inquire.

Especially in the foggy season, you should ask for directions in advance to grasp the accurate situation and avoid unnecessary trouble for yourself after the road is diverted. Highway closures are easy to accelerate, long-term energy concentration, fixed driving posture, monotonous operation, and can easily cause psychological and physical fatigue.

In addition, when the weather is bad, traffic accidents are more likely to occur. Therefore, when driving on the highway, it is generally necessary to take a break for about 2 hours of continuous driving to relieve fatigue and maintain a good mental state.

It is a variable lane.

It looks very different from other lanes, and it is basically the same, that is, there are many more diagonal lines on the inside of the lane, which are like zigzags, and this lane can be changed according to the traffic flow at the time, you can go straight, you can turn left, you can turn right.

It mainly means that the lane can change the direction according to the traffic flow, but there is a time limit, and the direction of traffic can not be chosen at any time.

When driving on the highway, you will encounter a solid line with oblique jagged teeth on both sides, which is a bit like a fish bone, and the road surface will become smaller when you drive through. Many car owners will panic at this time and don't know how to go, especially some novice drivers. Let's take a look, what does this kind of marking mean?

There are many marking signs on the expressway, and each type of marking sign represents a different meaning, which is used in different places to bring different instructions to remind passing drivers. The above two sides of the toothed like a fishbone line marking, is a longitudinal deceleration line, can also be called a visual deceleration line, the main role is to remind the owner of the need to slow down in front of the car, otherwise there will be rear-end collision or other accidents. It may be installed in places such as tunnels, sharp turns, and ramp entrances and exits to prevent traffic accidents.

This kind of marking will visually give the driver driving on the road, feel that the road surface is getting narrower and narrower, according to the normal driver's thinking consciousness, the driver will slow down at this time, and observe the signs or signs on the side of the road. Therefore, this kind of marking can effectively remind the driver that the front is about to drive to a special and dangerous road section, and it is necessary to slow down the vehicle first, and then pay attention to the road situation.

But in any case, when encountering this type of marking, it is not allowed to change lanes, otherwise you will be deducted points and fines. If you are on a normal road, you will be deducted 3 points and fined 200 yuan, because there are not only such markings on highways, but also on other roads. If you change lanes on the highway, you will be deducted 6 points and fined 200 yuan.

And you also need to see if there are other illegal behaviors such as speeding.

Then the corresponding penalties will be imposed.

The solid jagged white line is the variable guide lane marking.

Variable guided lane markings mean that the direction of the lane after entering the lane must be determined according to the indication of the corresponding lane signal. Variable guided lanes are flexible, unlike ordinary lane markings, which are marked on the ground to indicate the direction of the road.

The variable guided lane line is generally located in the road section with more complex traffic conditions, which is mainly for the concentration of traffic during some peak hours, but the lane is less; Or a section of the road where there is a significant difference in traffic flow between morning and evening rush hours.

When driving in a variable guide lane, you only need to follow the instructions of the signal lights. If the traffic light is green, then the traffic direction is the direction of your own driving, and if it is a red light, you cannot enter.

Therefore, when encountering this kind of road, remember to observe the traffic light, do not drive according to your memory, it may be the same direction when you last drive, but this time it is the opposite.

Generally, a variable guide lane indication sign is set up outside the starting point of the entrance road to remind and induce the vehicle to implement the variable guide lane control intersection in front of the vehicle.

This solid white toothed line is the variable guide lane line.

A variable guided lane means that there is more than one lane after entering the lane, and if there is an intersection that allows right turn and straight (i.e., right turn and straight go are combined into one lane), or U-turn and left turn are combined into one lane (generally used for the left lane).

Variable guided lanes are flexible, unlike ordinary lane markers, which go straight as long as they enter the lane and go straight, and turn left is a left turn. Generally, such lanes are located in sections of the road where the traffic is more complicated.

When the variable guide lane changes, a buffer period of a few seconds will be set, during this buffer period, the behavior of "not driving according to the lane" caused by the change of traffic direction will not be punished, but you must pay attention to the oncoming traffic in other directions to ensure traffic safety;

However, if there is an act of "not following the traffic signal" (i.e. "running a red light") in a variable lane, the penalty is strictly enforced.

The solid white toothed line is the variable guide lane marking.

The variable guide lane line is mainly for some peak hours traffic flow concentration, but the lane is less, or there is a significant difference in the traffic flow between morning and evening peak hours. There is a time limit, not at any time you can choose the direction of traffic at will, and the variable lane is the lane between the zigzag white solid lines.

Zigzag lines on either side of a solid line refer to variable lanes.

Zigzag road markings generally appear near intersections, and the main difference between this type of marking and the solid white line is that it has a jagged appearance, which is very easy to identify. Generally speaking, this type of lane will only be found in traffic jams, because it was originally designed to alleviate road congestion during rush hour. According to the flow direction of vehicles in different time periods, the flow direction of vehicles is regulated to solve the road congestion during peak hours.

Although this marking can alleviate road congestion during rush hour, it is also more demanding, so when entering this lane, be sure to follow the direction of the indicator light, even if it is not the route you want to take, and do not violate the rules. Secondly, after entering the variable guide lane, do not press the line, otherwise you will face a penalty of demerit points once you violate the rules.

Other road markings

1. Yellow dotted solid line.

When encountering the yellow marking, the dotted line can be pressed, the solid line can not be pressed, and the other side of the solid line is forbidden to cross the line. Therefore, if you encounter this kind of marking on the road, you must remember the yellow dotted solid line in the center, and it is forbidden to turn left and overtake across the line on the side of the solid line; On the dotted side, the bend is noisy, and vehicles are allowed to cross the line to overtake and turn left when it is safe to do so.

2. Prohibit the network cable.

This kind of road markings are generally set up at some special intersections or entrances and exits, if you want to park, see this kind of network cable, remember not to park the car in the network cable grid, once parked in the network cable grid, even if it is illegal parking.

3. Diversion line.

The diversion line is generally set up at the intersection, ramp or U-turn area, and it is forbidden to stop for the diversion line.

What does it mean to have zigzag lines on either side of a dotted line? There are zigzag lines on both sides of the dotted line is the longitudinal deceleration marking line on the highway, which can be divided into transverse deceleration marking line and longitudinal deceleration marking, which is set up in the toll station square, exit ramp or other white dashed lines that require vehicle deceleration sections, and its form has single dashed line, double dashed line and three dashed lines, which are set perpendicular to the direction of driving. The longitudinal deceleration marking line of the roadway is a set of diamond-shaped block dotted lines parallel to the roadway demarcation line, which is usually located at the upper and lower bridge positions and turning positions, and the main function is to form a sense of oppression through the visual narrowing of the roadway, so that the driver can automatically slow down at the bend, ramp and other positions that need to be decelerated.

Whether you can change lanes under the deceleration marking, you also need to look at the state of the marking next to the deceleration marking, if the sales travel Hongguo is a solid line, you can't change lanes, if it's a dotted line, you can change lanes. @2019

The function of the sawtooth line is to remind the owner to slow down, because the sawtooth line is generally set up behind the frequent evils of the filial piety bureau, as well as the entrance of some tunnels. For the sake of safety, the owner needs to reduce the speed of the vehicle to ensure the safety of the vehicle.

The zigzag line on both sides of the dotted line on the highway is a longitudinal deceleration marking, which is a bit like a fishbone line, when driving through, it will make the driver have an illusion that the road surface is getting narrower and narrower, and then the owner will take the initiative to reduce the speed of the car.

It should be noted that if the line next to the deceleration marker is a dashed line, the owner can change the lane at this time, but when the deceleration marker is next to the solid line, it is not allowed to change the lane. If the owner changes lanes at will, there will be corresponding penalties, so when driving, the owner must see the line on the road clearly and do not violate the rules.

Precautions for high-speed driving:

1. The traffic that merges into the highway from the ramp must be polite to others, and the turn signal, honk, and Qiaozu observation confirm that it does not affect other vehicles before entering the highway lane.

2. Reasonable vehicle distance is a prerequisite for ensuring the safety of both vehicles.

3. Overtaking is a very routine action, but you must pay attention to the distance between vehicles when overtaking on the highway, and you must lift your spirits in rainy days and oversized cars.