Set up dial up Internet access, username and password before the computer can access the Internet

Second, the method of establishing a broadband connection, different operating system settings are different, mainly including:

System. If a broadband connection cannot be established directly, please log in through other Internet access methods.

System. Start - Programs - Accessories - Communication - New Connection Wizard - Click"Next"-"Connect to the Internet"-"Set up my link manually"-"Connect with a broadband connection that requires a username and password"-"ISP name"Enter any - fill in the broadband password -"Create a shortcut to this link on my desktop"Pre-checked-"Done"。

System. 1) Start - Network Control Panel - Network and Sharing Center - Set up a link or network -"Connect to the Internet"-"Broadband PPPOE"- Enter the password, connection name - connection.

System. 1) Control Panel - Network & Internet - Network & Sharing Center -"Add a new connection or network"-"Connect to the Internet"-"Broadband PPPOE"- Enter broadband and password, connect.

2) Create a shortcut method: Control Panel - Network & Internet - Network & Sharing Center - Change adapter settings - Find the broadband connection and drag it to the desktop.

If you just want to use only one computer at a time to surf the Internet:

Pull the network cable and create a new "network connection".

How to establish a network connection:

1.On the desktop, right-click - "Neighbors" and select "Properties" in the menu

2.In the right rail of the network connection window, "Single key" - "Create a new connection".

3.In the New Connection Wizard, select Next

Select "Connect to the Internet" - "Next".

Select "Manually set up my connection" - "Next".

Select "Connect with a broadband connection that requires a username and password" - "Next".

Fill in the "ISP Name" (the ISP name is the name of the connection, any name is acceptable) - "Next".

Fill in the password of the broadband account and then "Next" to complete.

Can I talk to the boss about it for a week? Change one.

If you have a router, you don't need to enter the user name and password, and you can automatically connect to the Internet without a router, but you need to set the connection function to start automatically, and the specific setting steps are:

1. Right-click "Online Neighbors" - Properties;

2. In the "Network Connection" window that appears, right-click on ADSL (depending on what you name it, it is the one that is not "Local Connection"), right-click, and click "Properties";

3. In the properties dialog box that appears, click "Options".

4. Remove the check mark in front of the "prompt name, password and certificate, etc.", and click "OK" to exit;

5. Drag the adsl icon on the desktop to the back of the "Startup" in the start menu, and then delete the icon on the desktop, and you're done.

The next time you start the computer, Windows will automatically start the dialer program for you, so you can go directly to the Internet without dialing up again.

Yes, you can set the computer dial-up connection to remember the username and password, and don't prompt you to enter and display the connection progress, etc.

The router is used to directly access the Internet when the computer is turned on, and the dial-up connection is required to enter the password.

Control Panel - User Accounts Delete the account.

1.If you use the router to turn on the Internet, you can access the Internet.

2.If you use a cat to surf the Internet, you need to enter a password, or choose anyone who uses this computer.

Your configuration is correct, the operation is wrong. Because the router has already broadcast the number, the computer is plug-and-play when connected to the router, and there is no need to click on the broadband connection. Broadband connections can be removed.

When using the router, set your Internet account and password in the WAN part of the router's network connection.

The WAN setting of your router may be wrong, reset it again, the general type is dynamic IP, if it is an ADSL line, it needs to be set to PPPoE, and the LAN setting generally does not need to be changed.

First of all, you must understand the way of thinking, otherwise, it is blind work!

You need to set the dial-up parameters in the router and let the router dial instead of your computer.

You're using the router, and you still order a broadband connection, and the router automatically dials up.

Check two places:

First, there is no mistake in filling in the broadband and password.

Second, whether the wireless is enabled.

【 】Hello】【

How to set up dial-up Internet access on your computer:

Make sure that the NIC driver is installed correctly.

Open the network settings and create a new connection network

3.Choose how you want to surf the Internet, 4Enter your username and password to create a network connection.

5.Right-click on the created network connection "Connection" to connect to the Internet.

1. Create a new connection.

1) Click "Start All Programs Attachments Communication New Connection Wizard", pay attention to the careful step by step;

3) In the type of connection that comes out, click Next to continue, the default here is "Connect to Internet (C)";

4) In the next How to Connect panel, select the second "Manual Settings", click the "Next" button to continue;

5) In the following connection method, also select the second "Broadband connection with a username and password";

6) In the next connection name, enter a name, e.g. "broadband connection", which is just a name.

7) In the following username and password, enter the account number and password obtained when handling business at Telecom or Tietong, enter the password twice, and then click "Next" to continue;

8) In the next completion panel, check "Add a shortcut to my desktop", and click the button to finish.

9) Then there is an express shortcut on the desktop, double click and click the "Connect" button to connect to the network;

Click on the broadband connection and enter the account number and password.

The computer can't dial up the Internet but can access the Internet through the router Reason: I have already dialed on the router and can no longer dial on the computer.

Workaround: Connect directly to the router.

Set Router Dialing Method:

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoE Dialing] (some are ADSL dialing), enter the username and password (provided by the network service provider) according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Any computer that can access the Internet through a router will definitely be able to dial up the Internet. Generally, the dial-up Internet access method you established is wrong, re-establish a dial-up Internet connection!

I have encountered on my computer, you have a network connection in the control panel, first rebuild a network connection, set the IP and gateway, get the username and password, and send the network connection to the desktop. Then restart your computer and use the internet connection on your desktop.

Delete the broadband connection that comes with XP, and then create one again, be sure to make sure that your username and password are filled in correctly. If you don't owe internet bills, there's nothing wrong with Cats, it's your username and password.

Make sure your username and password are correct?

See how the properties of the dial-up connection differ from someone else's.