Windows Deployment Service realizes Win7 automatic installation, and when the time zone is selected,

You can set it in the answer file.

1. Enter Computer Management - Services and Applications - Services, find Windows Time, double-click it, in the pop-up interface, please select Automatic as the startup type, please make sure that the service status is started, if not, please click Start.

2. Enter the control panel - date and time, enter the Internet time, click to change the settings, check the synchronization with the Internet time server, and select a server, and then update immediately, if the synchronization is successful, it means that the server is available, otherwise, please change the server, and then update immediately until the available server is selected, press OK.

3. If the computer has installed security software, it may be turned off when the system is optimized, here is an example of 360 Security Guard, and this service will be reopened.

Open 360 Security Guard - Optimize Acceleration, click the startup item in the lower left corner, select the key services of the system, find Windows Time (time network proofreading service), please make sure that the current status is enabled, if not, please click Resume to start and turn on this service.

After the above operation, the function of automatic computer network calibration will be turned on.

It's really a toss-up, exactly the same problem, and finally got it done.

Start menu, run, type w32tm register and then run box, type, change windows time to automatic (delayed start) and you're good to go!

I don't know if it's the ghost system or the pot of 360 optimization software.,How can it not be started by booting up.,Delayed start can be turned on automatically.。

Check whether the service is disabled by 360. Click on the time in the bottom right corner, select - Change Time & Date - Internet Time - Change Settings - Tick Update Now - OK. Helpful.

Whether or not you use third-party optimization software.

Press start

Then Control Panel

clock, language , and region.

Then press the language yourself.

Solution 1:

GUI method: Click "Start Run" in turn, enter msconfig and confirm, you can modify the options of the boot menu in the boot tab.

Solution 2:

Run the Command Prompt in Administrator Mode and use the bcdedit command to modify the name of the Windows 7 menu item: bcdedit set description "Windows 7".

The above is about booting always to choose the system to start how not to choose,If you want to turn on the system when you install a dual system,Use one of the systems by default,You should also be able to use this method。

You're installing a dual system.,Reinstall the C drive much cleaner.,Those hooks on it can be removed.,Write information can be replaced with none.,Start it quickly.。 The logo is changed in the BIOS, depending on what motherboard it is.

It's just not installed.,Reinstall it after formatting.,Find a good version.,Put it in the USB disk and install it.,The motherboard logo of the boot can generally be set in the BIOS.,But this won't affect any speed or anything.,The key is that your system is installed on the line.。 Mess up when booting windows and leave him alone.

Even if you change it to 0 seconds, it will be displayed! In addition, the motherboard logo of the boot can be canceled and modified in the BIOS!

Now win7,You can use a USB flash drive.,And it's more thorough.,Reinstall it.。 It's a little suspicious that you don't have two systems installed.

Check it out on the forums, there's a lot about it.

Use the following methods to solve:

1.First make sure that the USB flash drive is formatted with NTFS.

2.When using Ultraiso to create a system disk, do not check the option "Create Boot Partition".

After using the above method to recreate the USB flash drive system disk, install it smoothly.

Installed directly, a driver is a small piece of information that is added to the operating system that contains information about the hardware device. With this information, the computer can communicate with the device. A driver is a configuration file written by a hardware manufacturer based on the operating system, and it can be said that without the driver, the hardware in the computer cannot work.

However, it is possible to install the system without installing it first.

This step of the driver can be skipped and installed with software such as the driver wizard.

Then install the system. After installing it, it will be fully automatically installed with a check of driving life or Master Lu or something.

Because the U disk you use is yes, it's good to use the U disk instead to boot the disk.

Reason: Win7 original installation is not supported.

Because the software selected to install the driver is not made by Microsoft, the tool cannot detect your hardware configuration when it is used, so it is not optional.

No, it doesn't matter, you can use the driver wizard to install it after installation.

Change the time zone, but also look at the time, it may be that your time is incorrect, and sometimes this kind of problem occurs.

Language setting Chinese (China), and then select the time zone.

Are you going to reinstall the system? If yes, go to the BIOS and set it up. Generally, you can press F12 to select the startup item.