My G7 doesn t know how to set up the Internet, please teach me

Install a Hydra surf on the Internet, set up the Internet with one click, no need to worry!

Ensure that you can enter the **dialing state, enter: **, and the mobile phone information settings will be automatically called out after entering. Or click "Advanced Settings - Phone Information" to view.

Click the Toggle DNS Check button in the bottom left corner so that it says "allowed" next to the button.

1. Set up WAP

1.Name: WAP (optional).

CMWAP (Access Point Name).

3.**：4.Port: 80

5.Username: (empty).

6.Password: (empty).

7.Server: (empty).

Empty) 9MMS** :(empty).

10.MMS port: (empty).

11.MMS protocol: WAP

00 (this item is the default, do not modify).

Type: (empty).

Then, press menu to select "Save". It will automatically exit and the settings of an access point will appear, which can be selected, and there is a dot on the right.

2. Set up MMS

1.Name: MMS (optional).

cmwap3.**：

4.Port: 80

5.Username: (empty).

6.Password: (empty).

7.Server: (empty).

9.MMS**:

10.MMS port: 80

11.MMS protocol: WAP

00 (this item is the default, do not modify).

Type: MMS

Then, press menu to select "Save". It will automatically exit and the setup of two access points will appear.

3. Set up net

1.Name: net (optional).

cmnet (access point name).

3.:(empty).

4.Port: (empty).

5.Username: (empty).

6.Password: (empty).

7.Server: (empty).

Empty) 9MMS** :(empty).

10.MMS port: (empty).

11.MMS protocol: WAP

00 (this item is the default, do not modify).

Type: (empty).

Then, press menu to select "Save". It will automatically exit and the settings of an access point will appear, which can be selected, and there is a dot on the right.

Settings - Data connection - Access point -

Manually enter CMWAP or CMNET

Don't fill in any other place: Save and launch.

Surfing the internet will do it.

If you use a mobile card, there is no need, because the mobile 2G network is up to 30K, which is very slow, and it takes a long time to open a web page; If you use Unicom's 3G card, in the place it is covered by the network, the network speed can be close to 1M broadband, which is very good, but the traffic is used up all of a sudden, at least 96 yuan per month**; Well, so long-winded, back to your question, the computer must be handheld, the desktop is not good, the mobile phone comes with a software called "WLAN hotspot", you click on it, the detailed path is "WLAN hotspot--- OK ---portable WLAN hotspot", you can tick the "portable WLAN hotspot" there, for security, you can also re-enter the password in the "password" there, the mobile phone is set up, search for wireless network on the computer, enter the password to connect. If you have any questions, you can ask me, try to answer them for you, and give them to me, thank you.

This is to let the phone act as a wireless router, you make sure that the phone has this function, and the computer needs to be plugged into a wireless signal receiver. If the computer can access the Internet wirelessly, you don't need it, just like a laptop that can access the Internet wirelessly.

You can access the network via WLAN (WiFi) or GPRS in the following ways:

1. WLAN (WiFi): Settings - > Wireless and Network - > WLAN can be selected through the following WLAN settings menu to access the wireless network (you may need to enter the connection password, you need to know the password to access correctly), and then open the QQ browser or weather forecast, it should be ready to use.

2. GPRS: Settings - > Wireless and Network - > Mobile Network This function may allow your mobile phone to connect to the network of the network operator to which the SIM card belongs, and you can access the network. However, this is a traffic fee, and it is recommended that you first apply for a 5 yuan or 10 yuan monthly traffic delivery business before using it.

If it really doesn't work, just restore the factory settings:

Settings - Memory Card & Phone Storage - Factory Reset - OK Hope it helps you, good luck!

The first step is to set up CMNET Internet access.

Create a new APN1Name: cmnet

cmnet type: default

Just fill in the above 3 options, the others are default, no need to fill in.

The second step is to set up MMS.

Create a new APN1Name: CMMMS

cmwap3.**：

4.Port: 80

5.Username: (empty).

6.Password: (empty).

7.Server: (empty).

9.MMS**:

10.MMS port: 80

11.MMS Protocol: WAP is selected here

Default) (some machines default to 00, some default 02, unchanged) type: mms

Save the third step, set up WAP Internet access.

Create a new APN1Name: CMWAP

cmwap3.**。

4.Port: 80

Type: default

Other default saves.

Phone Menu - Settings - Wireless Controls - Wi-Fi Management.

Once inside, just follow the prompts.

menu-settings-wireless-network-wlan tick.

If you need to set a fixed IP, go to Wi-Fi Settings -Menu-Advanced.

Then set up IP and DNS, etc.

Generally, you can go directly on, if it doesn't work, it is recommended to use the following methods to try:

Revert everything you previously set to default. (Main Page - Settings - Wireless & Networks - Mobile Network Settings - Access Point Name - Menu - Reset to Default Settings).

1. Add an access point.

Home page - Settings - Wireless & Networks - Mobile Network Settings - Access Point Name - Menu - New Access Point Name.

2. Create the first access point.

The parameters of the access point are as follows:

1）cmnet

Name: cmnet

Access point name: cmnet

**: Default (not set).

Port: Default (not set).

Username: Default (not set).

Password: Default (not set).

Server: Default (not set).

mmsc: Default (not set).

MMS**: Default (not set).

MMS port: Default (not set).

MMS Protocol: Default (WAP.)

MCC: Default (460).

mnc: default (00).

Authentication Type: (None).

Access point name type: default

After this setting is completed, please press the menu key on your phone to save and then there will be a selection of the origin of the CMNET at the back of the CMNET, and when you finish setting the three, CMNET will generally be automatically selected, and there is no need to choose one of the other two.

2）cmwap

Name: CMWAP

Access point name: CMWAP

Port: 80

Username: Default (not set).

Password: Default (not set).

Server: Default (not set).

mmsc: Default (not set).

MMS**: Default (not set).

MMS port: Default (not set).

MMS Protocol: Default (WAP.)

MCC: Default (460).

mnc: default (00).

Authentication Type: (None).

Access point name type: default

3)cmmms

Name: CMMMS

Access point name: CMWAP

Port: 80

Username: Default (not set).

Password: Default (not set).

Server: Default (not set).

MMS**: MMS port: 80

MMS Protocol: Default (WAP.)

MCC: Default (460).

mnc: default (00).

Authentication Type: (None).

Access Point Name Type: MMS

In this way, even if the setting is complete, remember to press the menu key to save first.

Exit the main page when the save is complete.

Press the dial ** button to dial :* * Automatically appear: mobile phone information, click to pull the page to the bottom, and see: "Toggle DNS Check" Click to switch to: allowed

Just log out, and that's it, and that's it.

Android? Go straight to the next Hydra APN and set it up with one click.

What does it mean to connect to a computer to access the Internet?

1 is to use ** 3G to share the network with the computer.

2 is to use the computer's network wifi to access the Internet.

Both of these require a radio unit to complete.