High finger point with straight table tennis racket, table tennis straight racket master ask table t

Lots of opinions....On the contrary, it is a little confusing, in fact, it is mainly to pull the ball, and it is most suitable for 5-layer pure wood bottom board. I don't know if the landlord is shooting straight or horizontally (look at the masters of the violent arc circle are biased towards soft 5 wood: such as oc, ye eat the ball deep, the arc is positive, the deformation is good, and the second jump rushes....However, the soft 5 wood needs to take the initiative to attack the baseboard, which is more difficult to get started)....Horizontal shooting can be considered:

OC-CR (priority, arc circle has nothing to say), EG, Butterfly Kerber, Li Ju, Hurricane King (solid feel, strong backhand assault, but overqualified)....They are all well-known arc ring plates. No matter which one you choose, the general arc circle will hit 5 planks....Rubber configuration forehand: (organic sticky sleeve) 39-40 mad 3, (inorganic) 729-08, Haifu Blue Whale, (coat) German Yula war drum (imported sponge + domestic adhesive rubber) ......Backhand:

Astringent national set) 729 Focus 3, Sky Wing, Shoot Leo CJ8000, (coat) Donic F1, Butterfly Sriver-el

Base plate: Butterfly.

Rubber: Hurricane 3 is super good.

At this price, the bottom plate recommends the Wu Shangyin series of butterflies to you, the board of this series is relatively light, and the feel is softer in the pure wood bottom board, which is very easy to use; Forehand, I don't recommend you to use Hurricane, because I personally think that Hurricane is not easy to use, I recommend you to use Haifu's Blue Whale, I just changed it, I think it's relatively easy to use; As for the backhand, if you are a more professional player, you can use the butterfly's fx or donic's f1, and if you think ** is more expensive, you can also use the bomb, if you are not professional, then use the Tianyi series of block 729.

My personal opinion is: the bottom plate is hurricane. The offense is good, and the feel is a little hard. It is best to match the forehand with Tianji 2, and the backhand with Tiangang. The most stable and delicate configuration. **Less than $600.

Modern table tennis is fast, accurate, changing, spinning, etc. The size or strength of these factors, although mainly depends on the level of skill, is also closely related to the instrument. The history of the development of table tennis proves that the improvement of rackets directly promotes the change and development of technology.

To put it simply, a racket is composed of the following three parts: 1Wooden Shoot:

Depending on the type of wood, the quality of the wood will vary in hardness and softness. The harder wooden ones are suitable for fast-break golfers, and the softer ones are suitable for curling balls and chippers. 2.

Rubber: There are two kinds of positive stickers and reverse stickers (long glue is a kind of positive sticker). 3.

Sponge: There are thick and thin, soft and hard. Thick sponges will be faster than thin sponges.

Due to the different feel of each person, when choosing the hardness of the sponge, it depends on the individual's feelings. Generally speaking, there are fewer users of sponges that are too hard, while younger golfers are more suitable for softer sponges as they can improve the feel of the hand when hitting the ball. batnball (10038 bytes) When choosing a table tennis racket, each person needs to decide which racket is suitable for them according to their own playing characteristics, especially the choice of rubber, the following is a brief introduction to the characteristics of three different performance rubber:

1.Sponge glue: Golfers who focus on speed will use this type of racket more often, especially the Chinese-style straight board attack is the most representative.

This type of racket will have a slight downspin when it is hit, but it is not as strong as the reverse rubber in terms of pulling the ball and creating spin. 2.Reverse sponge glue:

Because the reverse adhesive itself has a large viscosity and strong friction, it is easy to create rotation, so there are many users of arc circle players; However, there are also some use of the reverse sticker fast attack, mainly to enhance the spin quality in serving and rubbing. 3.Long glue:

In general, this kind of rubber is not easy to actively create spin, mainly relying on the different spins of the incoming ball to produce opposite spins, and the users are mainly golfers with variable playing styles. They usually convert rubber with different properties to hit the ball to increase the variation in spin, speed. 4.

Practice shooting questions I have explained in your other knowledge If you still have questions, you are welcome to ask questions at any time. There are two kinds of table tennis rackets First: horizontal racket (commonly known as knife board), which is generally round in shape, with rubber on both sides, and the rubber is red on one side and black on the other, representing the player

Zhuang Zhiyuan, Wang Liqin, Pol. Second: a straight racket (commonly known as a pencil racket), a racket similar to a rectangle.

There are two ways to play straight shots, the first one has only one side of the rubber, the rubber is usually red, and the forehand and backhand are hit on this side, representing the players: Jiang Penglong, Ma Lin; The second is a straight racket horizontal play, there is rubber on both sides of the racket, usually one black and one red, the grip is a straight racket grip method, the playing style is similar to the horizontal racket, on behalf of the player: Wang Hao.

Table tennis rackets are available at sporting goods companies.

Reference: me

The transverse plate is powerful d

According to the landlord, the following suggestions are provided:

The traditional straight board left push right attack or straight shot single-sided pull play is indeed a weakness of the backhand position, and the straight shot push block is more afraid of the backhand bottom line long ball, so the "straight shot and horizontal play" technique came into being to make up for the obvious weakness of the backhand.

The landlord is not afraid of the backhand position of the plus rotation downspin, from the technique of the shooting type must be more reclined, I don't know how the ball rotation strength you rub past at this time, if you rub the past ball is also more turned, and you obviously feel that the ball is rubbed in your hands, indicating that the landlord slow rubbing and spinning ability is still good, if you just rely on the paddle face to lean back to touch the ball, it means that the ball needs to be improved.

1. The landlord is more afraid of the opponent's non-spin or weak downspin, and believes that the problem lies in two aspects: 1. Insufficient judgment, not enough staring at the ball, and not seeing the opponent's action when rubbing the ball, the plate type, and the part of the friction ball. 2. The landlord habitually rubs the ball with a more backward racket, and the racket type is not adjusted enough, in fact, if the opponent's hair or rubbing over the downspin is not strong or does not turn, in the case of too late to turn sideways, you only need to put the racket up a little bit to solve it, or change the batting time to the early stage of the rise to use the fast rubbing technique, but also to lower the arc, to avoid being smashed by the opponent.

2. The opponent's downspin is weak, but the ball speed is slow, unable to borrow force, it is easy to make mistakes with afterburner, you can change the afterburner to push downspin, the plate type is slightly backwards, and the high point pushes the ball back, if the landing point is very good, it can even play a role in splitting long, the opponent will feel very uncomfortable, the closer to the bottom line, the better. Or a compromise, if the landlord is not clear, you can shoot back and rub the left and right spin balls, which can play a certain role in avoiding rotation. This method is also relatively stable, the effect of dealing with non-rotation and weak downspin is good, and you can also give full play to the advantages of the flexibility of the wrist of the straight shot, the other party is often not easy to adapt, the landlord can try.

3. There is a problem that needs to be solved, that is, in the case that you don't have time to turn sideways, the backhand is out of the half-high ball, and the afterburner pushes because the ball is already relatively high, you will be very uncomfortable to push, and the power is insufficient, you can practice the horizontal smash, haha, it is a board with the reverse side to shoot to death, the ball is so high, this is easier to practice.

4. Even if the landlord does not need to play horizontally, the reverse side must also need to be pasted with a piece of rubber to protect the bottom plate, you can paste a practice version of the raw rubber, the online purchase price is 10 yuan, the use of raw rubber is not easy to eat and rotate, and the characteristics of fast speed, practice the straight shot on the reverse side of the raw rubber smash ball, in order to deal with the backhand half-height opportunity ball when you can't turn sideways. Maybe one day you'll decide to practice the straight-shot reversal technique, haha.

Good luck with the game.

jjlforever has made it clear.

I'll say a few words. 1, don't learn to play horizontally, you are still an Olympic champion, look at Yoo Seungmin. It's even more unnecessary for us ordinary people. A lot of mistakes.

2. Judge the serve clearly.

3, you are very right, cut, a friend of mine who is straight and anti-glue picks up the side of my hair or does not turn, it is cut, the landing point, and the speed are very in place, and he is very clear about the rotation of the ball. You need to step up too.

1. If you want to reach a higher level, you must practice backhand attack, whether it is a straight shot or a traditional backhand smash. Otherwise, the backhand will be your eternal weakness, and the opponent percent.

Eighty or ninety balls will hit your backhand, can you do it if you don't practice?

2. I suggest that you choose to use the side racket to send a short ball, so that it is not easy to be attacked by the opponent, and you can hold on to the opponent without making mistakes.

I hope the above two questions can help you, and I wish you good luck.

There is no fixed trick or routine, you can use any method, the principle is not to return the ball, not too positive, because the opponent may think that your backhand is weak, deliberately suppress your backhand to hit, and hope to pull the ball or attack through this, you don't let the opponent wish. Pay attention to the opponent's position after rubbing the ball, and don't give him a comfortable position when returning the ball. In addition to the coping methods you wrote, I like to dig in this situation when I play straight shots.

There is no way out for the straight board without horizontal play, your style of play can be said to be even more backward than Liu Guoliang, Liu Guoliang also has excellent horizontal hitting skills in the backhand position, and then look at the current national team without horizontal hitting This technology is impossible to stay in the national team. Your style of play can refer to Liu Chengmin's style of play, but this style of play is backward compared to the current style of play, you can use less horizontal play, but if you don't learn, your backhand position can hardly pose a threat to the opponent, it is recommended that the landlord practice more horizontal fighting techniques, and you will experience its benefits if you use more.

Both. First, attention should be paid to the angle of the beat; The second should pay attention to the intensity; The third way is to pay attention to the landing point of the ball (the landing point is well controlled, this trick is very powerful).

It's all masters, my opinion is that you can push and block, and it's best to be the kind with a certain pull action, and hit the opponent with a backhand ......In this way, the technical requirements are not high, and it is not easy to make mistakes; The ball is fast and slightly topspin, making it difficult for the opponent to take advantage of the opportunity to attack ......Finally, I would like to say to the landlord, you and I are very similar to my playing style, and even the weaknesses are the same, hahaha.

- = The opponent rubs such a ball, you also rub it back, and it is definitely not easy to pull the ball sideways on the backhand and forehand Rub it to the backhand, this kind of ball does not grow and will not hit horizontally, but can only rub it over There are two ways to solve it.

1. Simple rubbing back in the past, pay attention to the landing point and follow the shooting type, not much to say, rub back to the opponent's small triangle area, it is difficult to catch up with the general amateur, easy to make mistakes, and grab the attack after the mistake.

2 Practice backhand straight shots Like this ball, I can pass with a downspin ball with a fast backhand, and the ball at the high point can be scored with a twist of a board.

Try to pull the ball sideways, and you don't learn to play horizontally, otherwise you will suffer, but if you have strong defensive ability, you can also defend first, and you are looking for opportunities to attack.

Rubbing the ball and pushing the block is the basic skills that the straight board must work hard to practice, in addition, you also need to practice a hand half push and half rub the ball, you can find the feeling from the squeezing, cutting, pushing down spin and other actions, which need to be experienced by yourself.

This method is a little better to send a short ball with a side racket, in fact, you are also a master, these three methods can be used, and you should change more when playing table tennis, not static.

If you don't want to practice horizontal play, you can use afterburner to push and block, you can mobilize the opponent, so that when the opponent returns the ball is not of good quality, you have an offensive opportunity and can rush sideways.

Please learn Liu Guoliang's side cutting technique. The closer the cutting point is to the axis of rotation, the smaller the rotational force of the ball is eaten, and the arc of the return ball is relatively low.

Afterburner pushing, it is necessary to turn sideways, and all require the ability to have a backhand stalemate.

Afterburner pushes the gear, and the driver rushes sideways.

From your situation, your backhand is mainly rubbing and pushing two techniques, although skilled but not enough to change, the coverage of the ball is not comprehensive enough, so the ability to adapt is insufficient.

It is precisely because the traditional straight backhand is weak and difficult, so its backhand technique is the most complex, mainly including pushing, rubbing (which can be subdivided into fast rubbing, slow rubbing, swinging, rubbing without turning the ball), squeezing, pushing downspin, pushing side spin, shaking skimming, skimming, bounce, backhand attack (there are changes of up and down spin). This is also the main reason why professional straight boarders are slow to grow and have a low success rate. If you insist on your own style of play, it is necessary to make up for your backhand technique, it is necessary to practice the backhand ball in a targeted manner, mainly to find the feeling of actively changing the backhand position, and then what ball to use what technique to process to form your own routine, and can smoothly connect with the forehand technique, and finally achieve the routine stereotype.

For example, the backhand baseline can be used to bounce the backhand or not turn the long ball with a backhand bounce or a backhand to attack the overspin (all use Zhuang Zedong's small action of close to the table ruler distance or half a foot distance, mainly with wrist explosiveness), and then connect the whole Taiwan forehand to grab the position and attack continuously.

You can take a look at the Korean one-sided play, so maybe you can learn from the straight one-sided technique.

1. Straight-shot fast-break grip (Figure 1).

1. Before beating: buckle the beat with the second knuckle of the index finger and the first knuckle of the thumb. The distance between the thumb and index finger should be moderate.

2. After the beat: The other three fingers are naturally bent, and the first knuckle of the middle finger is attached to the back of the beat.

2. Arc ball grip method (Figure 2).

1. Before shooting: The thumb is close to the left side of the handle, and the index finger buckles the handle to form a small ring to grip the handle.

2. After the racket: The other three fingers are naturally straightened, and the first knuckle of the middle finger is pressed against the middle of the back of the racket.

Excerpts from the Internet, I hope it can help you.