After the computer clicks, 2 lines of English appear, and then I can t get in

The system is broken.

You can only reinstall the system.

It is recommended that you install 360 Security Guard, which can automatically fix some problems in the system and is relatively stable.

If there is such an English prompt when you boot up, then according to this prompt, there should be a problem with the hard disk partition table "boot area", which needs to be repartitioned and formatted to the hard disk, and then reinstall the system.

You can go out and buy a ghost version of the installation disc (7 12 yuan), or borrow someone else's computer to make a USB flash drive boot disk, just adjust them to the first boot item in your computer's BIOS, so that you can repartition the hard disk, format, and install the system with one click through these two tools.

If you really don't know how to operate, and you are afraid of damaging the computer, then take the machine to the outside to repair the computer, let the family help you get it, the fee is about 30 yuan, if you are proficient, people can do it in ten minutes.

In this way, you try to redo the system directly, if the system is still not able to boot normally and enter the system desktop, then you can only partition the hard disk, format, and do the system again This is the operation.

This question used to drive me crazy! Very simple! Just open the main chassis, then unplug the memory module, wipe it clean with a clean and soft cloth, and then put it back in and plug it in tightly.

Turn it on again! Generally, it has been used for a long time, and the memory module in the main chassis is dirty,,, if it is working normally, just install it back!

To restart, press F10 or F12 to enter System Restore.

Delete things that shouldn't be deleted and take them for repair.

It should be a hardware problem, you first follow the second line of prompts to do it, ctrl+alt+del restart to try, if it doesn't work, disassemble the host, remove the memory module and wipe it with an eraser or soft cloth, don't reverse it when you plug it back

If there is a problem with the computer hardware, it may be that the contact is not good, try to dial the graphics card and memory, wipe the interface clean and install it again.

Try the cheat on the graphics card with the memory with a skin like a peel.

The hard disk lacks NTLDR boot file, find someone who will do it for you.

The English meaning makes you press these three keys at the same time to restart, missing NTLDR file. The only way is to reinstall the system.

There are two scenarios in which an NTLDR file is missing:

1. NTLDR file is lost or damaged.

2. The NTLDR file is not damaged or lost.

It's not damaged, it's not lost, why is it missing?

1) Use a non-system disk to boot, for example, your computer plugs in U or the optical drive has a CD, the default is not the system disk boot.

2) The information in the hard disk in the BIOS is changed and cannot be read.

3) The Master Boot Record (MBR) in the hard disk is corrupted, resulting in the system not being able to find the system partition.

4) The system partition is not activated. That's all there is to it.

I don't know if you understand it.

Re-adjust the boot boot boot.

A: The motherboard BIOS is out of power, or the BIOS settings are wrong, and you can't remember the hard disk information, if your system date is incorrect, it is likely to be the reason. Workaround:

Replace the BIOS battery and re-enter the BIOS to test the hard drive. Open the case, remove the shiny battery on the motherboard, and then try to install it after a few minutes, unplugging the case power cord first.

b:IDE SATA cable is of poor quality or plugged in. Workaround:

Change the IDE SATA cable or plug the IDE SATA cable into another IDE SATA slot on the motherboard, do not connect the hard disk cable with other IDE devices, such as optical drives, separate the two IDE cables, and set the master and slave disks correctly.

C: The hard disk is faulty and may need to be replaced.

D: There is a problem with the boot sector of the hard disk. You can check in the BIOS first, whether you can find the hard disk in the BIOS, if you can't find the hard disk in the BIOS, which may be the hard disk is broken.

If you can find the hard disk in the BIOS, set the optical drive to boot, put the system disk in the optical drive, and reinstall the system.

Your electric accompaniment brain may not be able to detect the hard disk (symptoms of undetectable hard disk: the hard disk information is not displayed in the IDE detection when the computer is turned on) so it will be displayed before entering the system"“reboot

andselect

proper

bootdevice

orinsert

bootmedia

inselected

bootdevice

andpressakey”

And if the hard disk is successfully detected, it can enter the system.

Reasons for hard drive detection failures:

The motherboard BIOS is out of power and you can't remember the hard disk information, if your system date is incorrect, it is likely to be the reason.

Solution: Replace the BIOS battery and re-enter the BIOS to detect the hard disk.

The IDE cable is of poor quality or is not well plugged in.

Solution: Change an IDE cable or insert the IDE cable into another IDE slot on the motherboard, do not connect the hard disk cable with other IDE devices, such as optical drives, separate the two IDE cables, and set the master and slave disks correctly.

3) The hard drive is faulty and may need to be replaced.

4) If your computer can detect the hard disk every time and cannot enter the system, reformat the hard disk completely and reinstall the system.

Fault phenomenon: everything is normal during the boot self-test, but when entering the system, that is, when the system boot is stuck, ntldr is missing, press ctrl+alt+del to restart

First of all, it's important to figure out that NTLDR is a hidden, read-only system file located at the root of the system disk and used to mount the operating system. When the file is lost, the system will display that it cannot be imported and the message will be Missing. And what to do when this happens?

One: Open the case, unplug the memory, and clean the gold finger of the memory to see if it can solve the problem.

2: If the fault persists, you can use the file copy method to copy the file into it, provided that you need to have a system disk, and then set it to the optical drive to boot and enter the system fault recovery console. After going to the C drive, enter"copy x：

i386\ntldr c:\"(Note: X is the drive letter) and press Enter, if the system prompts whether to overwrite, press it"y", and then enter the exit command to exit the console and restart.

3. This prompt may also appear if the hard disk partition table is corrupted. Then you can use a tool such as diskgen to recover and ghost to reinstall the system.

This method is simple and easy to learn, solves the problem thoroughly and is not easy to have problems, and is suitable for manual use of C drive without very important information.

Such a solution, I believe you have tried, there is always a method that will be useful for you, but if you still do not solve the problem that ntldr is missing and cannot enter the system, then you have to ask an expert or reinstall the system.

There is a problem with the system, it is recommended to reinstall the system.