Is 1G DDR3 1333 Kingston memory enough for the E5200 9800GTX? I hope the master will give some const

It is recommended that the landlord buy 2G memory Memory is not expensive now 2G is only about 120 yuan Moreover, your processor and graphics card are quite high It is recommended that you use 2G so that at least the processor is not wasted!

Low-end 45nm processor + mid-to-high-end graphics card, the machine you match is unbalanced!!

With more than 2GB of memory, 1GB is definitely not enough!!

Use it this way. DDR3 should not be used at this time

The motherboards that currently support DDR3 are compared. And you are equipped with such a configuration for the purpose of all games.

How can 1GB of RAM play large games smoothly!

It is recommended to add to 2g....As for the CPU, you must change to a better fan.

Implement extreme air-cooled overclocking!

No, the four-channel motherboards are very high-end, and the main frequency of your memory is different, it will be reduced, and the unification is 1333.

Not all computers can do four-channel, you need a super good board such as x79, it seems to have about 3000, it should be the same memory, or reduce the main frequency

AMD's motherboard may not work, AMD's motherboard will work in asymmetrical dual-channel single-channel+ mode, and the working stability is not as good as single-channel or dual-channel.

Definitely not, the capacity of the two channels should be the same.

It is best not to do this, so that the computer will bear the load and there will be a greater chance of crashing, blue screen working stability is poor, it is recommended that the two memory modules are exactly the same (the same appearance of the same model of the same manufacturer).

It is recommended to use Jet P43,It's very good, I've used it,With Q8200 can exceed the CPU external frequency to380MHz,**Cheap 390 can start,But it's DDR2 memory,If you have to DDR3 memory, Jet P43D3 is slightly more expensive than the previous one,775U recommends DDR2 memory group dual channel,Performance is very good。 The dual pass of the DDR3 memory group cannot give full play to the advantages of memory, but the high memory latency of DDR3 memory will drag it down. The old 775 motherboard now does not need to choose more than 500 yuan, it is too high to choose i3, i5 platform!

The graphics cards are all 9800GT, the CPU is replaced by the Pentium dual-core E6300, there is no difference of a few dollars (just a few dozen dollars, about 460), the motherboard wants to be more affordable, it is Gigabyte P41, if you want to be in a good point, you can match it with Gigabyte P43, if you want to match a good one, you can match it with Gigabyte P45. Actually, p43 will do.

Why do you change DDR2? If you want to be cheap, you can use P41 directly, and changing DDR2 is just a memory problem, and it has nothing to do with other architectures.

There is not a lot of room for motherboard selection, after all, there are not many P45 that want to support DDR3.

Of course, the higher the frequency, the better, and the higher the frequency, the faster the memory module storage read speed. Before buying, it is best to see how much the motherboard supports at most, whether it is 1600 or 1333, whether it is overclocking support or the default 1600

Frequently different Others are the same It must be 1600 good, but if you want to buy a 1600 strip, you have to carefully read the part about the memory manufacturer and number on the motherboard manual, and the 1600 strip you buy must be the same as the above, otherwise the motherboard will still be used according to 1333.

It's better to use Samsung's. Different brands of memory. There will be compatibility issues. This thing can't be priced. No matter how cheap it is, it won't work for you. It's better to add money to buy one that can improve performance.

Buy Kingston, although there are more fakes, but I said to the merchant that if you can't have it, you can change it, and change it until it can be used, until I haven't heard that there are so many incompatible problems.

Buy Samsung DDR31066 1G memory module, because it is the same model as the original, it can be fully compatible, there is no problem of memory conflict, and there may be compatibility problems if you buy Kingston.

The best thing is to buy Kingston DDR3 1333 2G Kingston's quality is also very good, and the after-sales service is good.

Kingston's memory has a status all over the world, and Samsung's memory is bought by fewer people.

If you want to group dual channels, it is best to be the same brand, the same frequency, the same model, the same size, as for what you want to buy, it is all up to you.

Compatibility issues are now rare.

1g is about 90, 2g is 135-140. It's definitely going to be 2g, you go to Jingdong**take a look**.

It's good to buy 2G RAM, you definitely want antivirus software or something, 1G RAM is stuck.

Can be used together.

However, the computer will work at the frequency of DDR3 1333 (, which will be a bit of a loss in performance.

Two 4G ones have better performance than one 8G one.

Dual-channel provides twice the memory bandwidth, which is a great benefit for software that has to exchange data frequently with memory.

The memory of 1600 and the memory of 1333 can be installed on a computer at the same time, the frequency of the two memories is different, and the memory of the high frequency will be automatically downclocked to adapt to the memory of the low frequency to prevent incompatibility, that is, the frequency of 1600 will be automatically downclocked to the frequency of 1333 to cooperate with the use of dual channels.

Motherboard: Look at your motherboard.

Normally, it can be used, and the 1600 is used together to operate at the 1333 frequency, but there are also incompatible situations.

If you don't have a blue screen, it's stable, just use it directly. Running at a frequency of 1333, the performance is slightly worse than that of 1600.

There is no problem, that is, the performance of 1600 is pulled down to 1333 frequency depends on what CPU, APU dual-channel explosion single.

Other CPUs, dual-channel have only a slight advantage and are almost negligible!

Pure hand fighting, please adopt! If you don't understand, please ask.

OK. Closer to lower frequencies, the 1600 will operate at 1333.

If two 4G and one 8G, 2 4G is better. If it is compared to a 4G, 2 is better. Just like the drain, the memory size is the width, and dual channels drain faster than single channels. So the processing speed is faster.

OK. To increase the memory, pay attention to the following points:

1. The frequency should be consistent. It turned out to be 1600, and it is better to find 1600 memory as well.

2. If the frequency cannot be found consistently, DDR3 generation memory, you can find a similar frequency. For example, if you use 1066, you can generally use 1333, but don't use 1600, it is likely to be incompatible.

3. To increase the memory of the old motherboard, it is best to use a double-sided 16-particle one, which is much better than the compatibility of single-sided 8-particle or single-sided 4-particle technology.

4. Notebooks, there are often some models that only support low-voltage memory, pay attention when increasing, if you buy a standard voltage, it may be unstable due to insufficient power supply.

5. Sometimes, the order of memory will also affect compatibility. For example, if you have two memory slots, the order of the two memory slots is reversed, and sometimes the compatibility will be changed.

1600 is good, you are afraid that the desktop will not be able to use it. In fact, as long as it is a DDR3 interface, DDR3 RAM can be used.

Hope it helps.

Of course it is good for high frequency. 1600

It mainly depends on the motherboard support, and it feels similar to the actual use.