Why is the hot water side switch of the shower faucet on the 38 degrees?

Maybe it's your field, it itself has a display temperature, so this position will show 38 degrees, you can turn it to the left and turn it on again, and the temperature will be a little higher.

If the hot water side switch is marked with 38°, it should be just such a mark, and the normal water temperature is generally controlled at 44° in winter and 412 degrees in summer.

You didn't say that you have this faucet, it refers to the temperature that goes to you is 38°, which is more suitable for the human body. Bathe at a temperature.

Thermostatic shower head, marked 38 degrees. It is because this temperature is more suitable for people, and then it can be added or subtracted left and right for mediation.

Some shower faucets, the switch of hot water marked 38° is for the house, and there are many people who hit the hot water at once to burn themselves, so he said that he marked the temperature.

This is to remind you that the temperature of the valve on the hot water side should not exceed 38 degrees when we take a bath, otherwise our human body will not be able to withstand such a high temperature.

It should be a thermostatic faucet, and the water outlet temperature is theoretically constant at 38 degrees.

The hot water side switch of the bath faucet is marked with 38°, which may be 38° on this side.

Why is the hot water side switch of the shower head marked with 38 degrees? This useless target?

Shower faucet, hot water side switch. The standard 38° is the degree of water temperature. The maximum temperature is 38°.

Why is 38 degrees marked on the hot water side switch of the shower faucet? This 38 degrees means that the maximum hot water temperature of this faucet is 38 degrees.

Mixing valves, parts that can mix hot water.

Hello! You are referring to the 'hot and cold water control valve'.

Mixing valve, in daily life, the use of showers is very common, and the reason why the shower can achieve the alternation of hot and cold water is mainly due to the mixing valve. In fact, not only on the shower, but also for the alternation of hot and cold water from the faucet in the family, it generally has the role of this device.

A mixing valve is a valve that mixes hot and cold water. In fact, the valve itself cannot be mixed, but it is connected to the cold and hot water pipes, which plays a role in mixing. There are two main classifications of this product, one is manual mechanical type, and the other is self-powered constant temperature type, of which the former is the most widely used category.

Generally speaking, there are two main water inlets, one is hot water and the other is cold water, and then there are switches to control, according to the size of the switch to achieve the heat of the water they want, so as to achieve a mixing purpose. Generally speaking, the mixing valve for the bathroom is a complete set, of course, if there are special needs, you can also buy it.

Check whether the water heater is heated and whether the water temperature is heated to the maximum;

Check the hot water. Whether the triangle valve of the hot water pipe under the water heater is open to ensure that the hot water boiled by the water heater can flow out;

Check that the mixer valve of the faucet is intact, that is, whether the left half is good;

Note: The position standard of cold water in the faucet is "left hot and right cold", and you can judge whether there is cold and hot water mixed together by turning to the left to see the size of the water flow, so as to judge whether the pipe or switch is open.

Question, netizens have also done their own experiments to prove that what I said is right, and the content may be more specialized, so it is a copy of the answer I wrote before here This question is like this.

First, the mixing valve can be installed, but the effect is not large, the reason is that when you feel that the water is hot and ready to open cold water for temperature adjustment at the same time, the water flow through the gas water heater will decline, the gas water heater must maintain the corresponding water flow pressure to work, in order to prevent the possibility of no fire leakage due to the small water flow, so in the design of the gas water heater, the pressure change caused by the small water flow rate has been protected accordingly, if the water flow is small, it will automatically extinguish the fire and cut off the gas.

Second, as you said, many of the problems of washing hands are also opened to find hot water first, so that the cold and heat can be adjusted, in fact, at this time we use the hot water in the pipe, and the water heater is also turned off at this time.

The function of the water heater is to heat cold water for us, and the temperature adjustment is responsible for the temperature control faucet, which can be adjusted in two directions, left and right, front and back, and adjust the water temperature and water output at the same time.

Adjust from cold to hot first to avoid scalding caused by the opposite operation.

Check the water heater carefully.

Some products are externally controlled, and the water temperature and heat are adjusted on the water heater.

When the water pressure is low, the pipe is long, the mixing valve is adjusted to the appropriate water temperature, and the water pressure affects the water heater, not the water du

Low temperature means that the flame is extinguished, resulting in the phenomenon of not cold or hot.

It is best to adjust the water temperature of the gas water heater at the hot water faucet closest to the outlet of the gas water heater to the back of the hand when it feels hot and cold.

You can measure the opposite side and see how many mm it is. Allen wrenches, each with mm, and of course larger and smaller.

Is this shower faucet out of order? You're a thermostatic product, right? If the water temperature cannot be adjusted, it means that the thermostatic valve core inside is broken, and it may be that the water quality is not good and the thermostatic valve core is blocked, resulting in non-constant temperature.

I also have the same color is not the same How much money do you have?? I just bought it on **, and when I bought it, the shopkeeper specifically told me that I was equipped with a filter, but I was afraid that it would be plugged. This doesn't seem to be very easy to prepare for fiber repair, you can go to the palm of this slow cabinet and ask.

You can search for the name of the store Permanent Bathroom.

I remember as if I was going to get the stuff that was circled and then boil the water. Because that thing seems to control the flow of water from the faucet or from the rain head.

Pull on the small button-type handle in the middle.

Normally, there is hot water on the left, so pull the faucet out to the left. Look at the red mark on the faucet.

The switch below is hot and cold water.

The left and right are definitely separated, and you come to send a good review?

The seal inside the transfer switch between the faucet and the shower is damaged.

Hello, the general shower has two valves, one is to control the hot and cold water, the left is hot and the right is cold below, and the upper one is a conversion capacity valve with top spray and hand spray! Some also have a faucet underneath and also have a valve! In addition, there is a controller on both the hand spray and the top spray to control the shape of the water column!

Didn't say a jb, now.

The shower faucets are all duckbilled, where did the two valves come from???

A control fixed sprinkler head! A shower head that controls the hand hold.

There is a mouth below to fill a bucket with water, and the top is used for bathing.