Redmi won t turn on and only shows what is going on with Mi

There are many problems that form this problem, and the bigger one may be that the firmware is damaged, the next card is swiped and the package is swiped, and the recovery mode is forcefully flashed, if it can't be solved, then the line is swiped, and if the line brush can't be solved, then the hardware is damaged, such as the motherboard.

Solution: 1. In the shutdown state, press and hold the power button and the volume down button at the same time, and release the button after lighting up the screen, and you will see three options.

2. At this time, the volume down button is the selection key, the volume up button is the OK key, the power button is useless, press the volume down button to move the cursor to "recovery mode" and then press the volume up button to confirm.

3. Wait for a moment to appear, a green Android robot lying on the ground, and finally press the power button to enter.

4. Press the power button and a menu will appear.

5. At this time, the volume up button is the confirmation key, and the volume down button can be selected, and then select "wipe data factory reset" to confirm. After you are confirmed, the menu will appear, and you can select "yes"."In the OK.

6. Then go back and select "wipe cache partition" to confirm. Once confirmed, the menu will appear, and you will select "yes" as well"In the OK.

Wait for the progress bar to end, press back, select "reboot system now" and the phone will start restarting automatically.

Hello, dear, Xiaomi phone can't turn on, keeps showing mi, and the solution is as follows: The reason may be that the phone is dead or the system has crashed. The following is the applicable solution: 1. Xiaomi mobile phone has a battery, you can take out the battery, it will automatically shut down, and then reinstall the battery and turn it on.

2. Turn off the phone, then press and hold the power button and volume + button to enter the recovery mode of the phone, then select Chinese Simplified, Clear Data, Clear All Data, and restart the phone to return to normal after clearing. 3. If you still can't turn on, you can connect your phone to the computer, **flash the tool miflash, and flash the complete system package. 4. Apply for after-sales service, as long as it is within the warranty period, it can be guaranteed free of charge.

Xiaomi users can confirm it by the following methods:

1.The end of the battery is lined with paper, which may make the fault disappear.

2.Pressing the battery to disturb the wax seat gold finger, Yanye may make the fault phenomenon disappear.

3.Plug in the charger and the fault may disappear.

If you can't solve it, you can only go to Xiaomi after-sales service for maintenance.

Solution: 1. Press and hold the power button and the volume + button at the same time to force restart the phone, and it will return to normal after restarting.

2. If it still stays on the boot screen after restarting, you can try to restore the phone to factory settings. Pull out the phone battery to power off and turn it off, then install the battery, press and hold the volume + and power keys at the same time to enter recovery mode, and then select Chinese Simplified - Clear Data - Clear all data, and then restart the phone to return to normal.

3. If you still can't enter the system after restarting after clearing all data, you can connect to the computer to flash the phone, and flash the new system for the mobile phone to solve the problem; The specific flashing tutorial and flashing package can be obtained by visiting the official Xiaomi forum.

In addition, problems with the hardware of the mobile phone will also lead to staying in the boot interface and not being able to enter the system, such as motherboard chip failure, processor, memory failure, etc., this situation needs to contact Xiaomi's after-sales service for maintenance to solve.