-
Anonymous users2024-02-07Format Re-Copy and re-open to see.
-
Anonymous users2024-02-06The problem of the USB flash drive is not good quality, and the USB flash drive has bad sectors.
So the file you copied is corrupted.
I also had this problem with the USB flash drive I used before, and there was no way to either take it for repair or replace it.
Do you use Tsinghua Unigroup? In the past, don't be greedy for cheap and shoddy goods, it is still better for Kingston.
-
Anonymous users2024-02-05When using a USB flash drive to copy files, do not directly unplug the USB flash drive, to safely delete the hardware, your typical problem is that the file is not completely copied, you will unplug the USB flash drive from the computer. Remedy, format the USB flash drive thoroughly before use.
-
Anonymous users2024-02-04Your USB flash drive is fake, it's been expanded, go find him. It's just that the USB flash drive wasn't that big, but it shows that it's so big. Someone took a 16M USB flash drive and changed the file system inside, showing 8G on the PC.
There must be an impact on the files that exist in it.,Files that exceed the range will be lost.,And the USB flash drive that does this must also be made of rotten flash memory.,Even if there are no files beyond the range, it's difficult to ensure security.。 The copy cannot be used, it is tested in the storage area that is not actually useful, and the file is damaged, and sometimes it is good, it happens to be tested in the useful storage area.
-
Anonymous users2024-02-03Directly threw away and bought a fake. Now the merchants are getting more and more fake. The solution to such problems is to go directly to the seller and show him.
-
Anonymous users2024-02-02Summary. Hello,Dear,The installation package in the U disk cannot be installed for the following reasons:
Hello,Dear,The installation package in the U disk cannot be installed for the following reasons:
When using a USB flash drive to store and transfer installation packages, it is recommended to check the integrity and correctness of the files to ensure that they are not corrupted or damaged. 2.Viral Infection:
If there are malicious files or viruses in the USB flash drive, the normal installation may be affected. When using a USB flash drive to store and transfer files, it is recommended to perform antivirus scanning and removal first, or use trustworthy antivirus software to detect and deal with them. 3.
System compatibility issues: The installation package may be incompatible with the operating system or hardware device, resulting in the failure to install. When selecting and installing a package, you need to review the appropriate system and hardware requirements and make sure that it is natively compatible.
4.The installation package has expired: The installation package of some software may be time-sensitive and cannot be used after the specified time.
Some software needs to rely on specific libraries or plug-ins to run, and if it is not installed or the version is incorrect, it may not be installed properly. In this case, you need to deal with it according to the specific prompt information, such as installing the missing library or new judgment or new plug-in, etc., to solve the problem that the installation package in the USB flash drive cannot be installed
-
Anonymous users2024-02-01Hello, the reasons why the installation package cannot be installed may have many Cong Yan have the following points: 1. The U disk is damaged or the format is incorrect, which may cause the installation package to not be able to read normally. 2. The installation package itself may be corrupted, or you don't have enough permissions to perform the installation operation.
3. Some security software (such as anti-virus software, firewall, etc.) may intercept the operation of the installer. 4. It may also be caused by other unknown issues. If you're having this issue, you can try re-installing the package, closing the security software, and running the installer as an administrator.
-
Anonymous users2024-01-31Hello dear <> ha, <>
My answer is <>
Please bear with me and take a look at <>
The installation package in the USB flash drive cannot be installed for the following reasons:1File system issues with USB flash drives.
The default file system of the USB flash drive is FAT32, and the file size of many installers exceeds the file size limit of FAT32 (4GB). This will cause the package to fail to unzip or run properly. It can be solved by formatting the USB flash drive as NTFS or ExFAT file system.
2.Permission issues. The default permissions of files on the USB flash drive may cause the system disk or program files to not be written, and the installation may fail.
You can select "Format as administrator" when formatting the USB flash drive, or change the permissions of the USB flash drive to "Full Control" after running the file explorer as an administrator in Windows. 3.File corruption.
The files in the installation package may be damaged or lost due to the poor storage environment of the USB flash drive, and an error may be reported during the installation process. At this time, it is necessary to re-configure the new ** installation package and ensure that it is stored in a location with a good environment. 4.
System protection settings. In Windows, the "read-only" attribute of a system protection or file may prevent the installer from modifying the system file, causing the installation to fail. You need to add an exception to the system protection to slide the directory, or remove the "read-only" attribute of the file as an administrator.
5.Other reasons. False positives and compatibility issues may also cause the installation package in the USB flash drive to not work properly.
The error message needs to be analyzed and handled accordingly. Therefore, if you encounter the problem that the installation package in the USB flash drive cannot be used, you can check and solve it by following the steps below:1
To check the file system of the USB flash drive, you need to set the reformat to NTFS or run the file explorer as an administrator, and change the permission of the USB flash drive to "Full Control". 3.Re-install the package and make sure that the storage path environment is good.
4.Add an exception to the installation path in System Protection and remove the "Read Only" attribute. 5.
Check whether the error message is related to antivirus software or compatibility issues, and handle the error accordingly. 6.Try to run the installation package on the C drive to determine if the problem is caused by the USB flash drive.
After the U disk is mass-produced, you can't install the system like the optical drive, you can only enter the PE, and restore the image in the U disk to the computer in the PE. However, the successful mass production should have a boot function, you need to set the first boot from the BIOS to removable (removable device) to boot. If it can't be started, it may be that mass production is not successful! >>>More
Summary. Precautions for the use of U disk: 1. The U disk generally has a write protection switch, but it should be switched before the U disk is inserted into the computer interface, and should not be switched in the working state of the U disk. >>>More
If life goes on all the time, then can this world still have fun I often ask the Lord what you think, but learn to look away, don't think badly about everything, calm down, you can also find a lot of good things, your he, she can't be with you, there are many reasons, you try to have fun, or not, it's better to watch the joy The world will not change because of you, but you can change your world, please.
Like Hong Kong and Taiwan, foreign schools can wear it, and there are youth idol dramas on TV, which are not allowed to be worn in the mainland, in order to avoid harmful incidents, if you really want to wear it, buy one yourself, but if the teacher doesn't allow it, change it.
It should be a virus, which will change the properties of files and folders, such as adding system properties and hidden properties. >>>More