Why can t the Taipower USB flash drive be started after mass production?

After the U disk is mass-produced, you can't install the system like the optical drive, you can only enter the PE, and restore the image in the U disk to the computer in the PE. However, the successful mass production should have a boot function, you need to set the first boot from the BIOS to removable (removable device) to boot. If it can't be started, it may be that mass production is not successful!

Try it first!!

Dear users, hello :

You can use the built-in settings of the USB flash drive - delete the encryption master. exe software, repartition the capacity and format, but the encrypted area files will not be able to be retrieved.

Set Delete Crypto Master. exe formatting, formatting will redivide the capacity of the USB flash drive, and the data will be deleted; If you use the quick format function on the computer, you can format the files in the encrypted area, and you can re-encrypt the anti-virus encryption package. If you forget your password, we can't help you recover it, please remember your password.

When you delete USB flash drive safely, you often encounter a message that says, "The 'Universal Volume' device cannot be stopped, please stop the device later." ”

In this case, can I forcibly unplug the USB flash drive? Of course not! At this time, if you forcibly remove it, it is easy to damage the USB port of the computer or your USB flash drive. If you have important data on your USB stick, it is likely to be destroyed. So what should be done?

Often, when we take out the files or data from the USB flash drive, we use the "copy" and "paste" methods, and if the file on the USB flash drive is copied, the file will always be placed in the clipboard of the system and is in a state of standby. And if we want to delete the USB flash drive in this case, the above prompt that the USB flash drive cannot be stopped will appear.

The corresponding solution is: empty your clipboard, or copy a file on your hard disk and then paste it, then you delete the USB flash drive prompt to see if it is successfully deleted?

The second method:

If you don't think the above method is effective, you can use the following method:

Press the keyboard at the same time"ctrl"＋"alt"＋"del"key combination, which will appear"Task Manager"window, click"process"tag, in"The name of the image"""process, select""process, and then click"End the process", a Task Manager warning will pop up, asking you whether to close the process or not, click on it"Yes", i.e. closed""processThen delete the USB flash drive and you can delete it normally.

Note when using this method: if there is more than one""process, you need to put more than one""Processes are all shut down.

The third method:

This method is also done with the help of the task manager while pressing the keyboard"ctrl"＋"alt"＋"del"Key combination, appears"Task Manager"window, click"process", search""process and end it. At this time, you will find that your desktop is gone, please do not panic, continue to the following operations, click "File" in the task manager - "New Task" - enter OK. Then delete the USB flash drive, and you will find that it is safe to delete.

Fourth method:

The easiest, but most time-consuming, method is to restart your computer.

If you feel that it is a bit troublesome to solve the problem when it arises, you can take the following precautions in advance:

Turn off the preview feature of the system.

Method: Double-click on My Computer - Tools - Folder Options - General - Tasks - Use the Windows Traditional Style Folder, and then click OK. That's it once and for all.

Tips: At present, some U disk technology is in place, and some U disk can be plugged and unplugged directly. But no matter how good the U disk is, there is a time when it can never be plugged and unplugged directly, that is, look carefully at the little red light of your U disk, the small light is constantly flashing when it means that it is constantly reading and writing data, at this time you must not pull it out, otherwise the data will be damaged, and the U disk will be scrapped.

Soft faults may be caused by unsafe removal during use.

You can experiment with "Easy Self Software Recovery".

If it doesn't work, it will be repaired with a mass-produced tool.

If you check that the attribute is not 0 bytes, then it can be recovered,Usually it shows that 0 bytes are poisoned or the data in the main control chip is damaged,Both may you can try,If the main control chip is damaged,That's only with mass production tools to repair,If you feel that there is a problem with mass production,You can hi me。

In my opinion, it shouldn't be possible.,I have two USB flash drives that have also become RAW format.,Use low-grid、Mass production was repaired.。

Format the one you just bought first.

Or parallel imports.

If it is an XP system, you should pay attention to the icon in the lower right corner when you unplug the USB disk, showing that the hardware is safely deleted after unplugging, XP does not support hot swapping, win7 supports, if you pull it directly, it will destroy the data in the USB flash drive, and the reading speed of the USB disk will slow down after a long time, and even become unusable, I have encountered this kind of problem; After inserting the file, the screen shows that the file is unreadable, you can log out some computers, and logging out or restarting the computer can solve many problems.

The USB flash drive is fake, how big is your USB flash drive? It's brushed out.,2g can be brushed into 8g.,Even 100g.。。。 You said it wouldn't be bad to put something in.

Hello, 1) It is not that the capacity is reduced, but the part that is reduced is the hidden encrypted area. After setting the encrypted area, the public area files are displayed, and the encrypted area files can be viewed through it. If there is a problem with zero capacity or reduced capacity, you can go to Settings - Delete Encryption Master.

EXE" software to format the USB flash drive and restore the product capacity. If you delete the encryption master by mistake, please go to the official website of Taipower [right click - save as]**Anti-virus encryption package to the U disk (must** corresponding package), and use it to log in to the encryption area.

2) Because this product silently recognizes the "encryption master" (security function) when leaving the factory, only a few MB size space is reserved for storing the corresponding files, and other capacities are "protected" and cannot be directly accessed, so the available storage space is only displayed as a few MB;

3) At this time, you only need to run the "Add Lingmi Master" to enter the "Confidential Area" to read the file, and at this time, all the capacity of this product will be opened.