How to add navigation to a car mirror dash cam

The implementation method and detailed operation steps are as follows:

Prepare tools: screwdriver, knife.

1. First, use a knife to pry up the all-in-one bezel from the lower right corner, as shown in the figure below, and then move on to the next step.

2. Secondly, after completing the above steps, remove the baffle and remove the 4 screws with a screwdriver, as shown in the figure below, and then move on to the next step.

3. Then, after completing the above steps, unplug all the wires inside, pay attention to protect the integrity of the thread ends, as shown in the figure below, and then enter the next step.

4. Then, after completing the above steps, connect the connecting cable of the all-in-one machine, turn on the power with the key, start the all-in-one machine, and then check whether the all-in-one machine is in good condition, as shown in the figure below, and then enter the next step.

5. Subsequently, after completing the above steps, start to install the dash cam and connect the camera power to the live wire of the car lighting, as shown in the figure below, and then enter the next step.

6. Then, after completing the above steps, remove the soundproof panel in the trunk lid to pull the wire to the license plate position, as shown in the figure below, and then enter the next step.

7. Then, after completing the above steps, connect the wires, tighten the screws and cover the baffle as shown in the figure below, and then enter the next step.

8. Finally, after completing the above steps, the car is powered on, the dash cam is successfully connected to the navigation, and starts to record data, as shown in the figure below. In this way, the problem is solved.

1. First get on the car and turn on the driving computer.

2. Swipe left on the home page to find the dash cam.

As shown in the figure below. <>

3. Then find and click on the dash cam on the page, as shown below.

4. Click on this folder below the dash cam.

1 First, use a knife to pry up multiple sheets of white paper all-in-one bezel from one of the baffles in the lower right corner, as shown in the figure below, and then proceed to the next step.

2 Remove the bezel, use a screwdriver to remove the 4 screws as shown in the image below, and proceed to the next step.

3 Unplug all wires inside, taking care to protect the integrity of the thread ends as shown in the figure below, and then move on to the next step.

<>5 Start installing the dashcam and connect the camera power to the live wire of the car lighting as shown in the figure below, then proceed to the next step.

6 Remove the acoustic panel in the trunk lid, pull the wire to the license plate position as shown in the picture below, and proceed to the next step.

7 Then, connect the wires, tighten the screws and cover the bezel, and move on to the next step.

8 Finally, the car starts, the dash cam is successfully connected to the navigation, and it starts recording data.

Our company's recorder can be directly connected to the navigator, you have to look at the wiring method of the recorder, there is a line that is connected to the navigation, grounding, and acc is the power supply line, and the other displays are connected to the navigation.

Take a look at the wiring method of the recorder, there is a wire that is connected to the navigation, grounding, and ACC is the power supply line, and the other displays are connected to the navigation.

One. Basic concepts.

Two. Function.

1. Safeguard the legitimate rights and interests of the driver, for pedestrians and bicycles and motorcycles crossing the highway, in case of scratching with them, they may be extorted, if there is a dash cam, the driver can provide effective evidence for himself.

2. The surveillance video is recorded and played, the responsibility for the accident is clear at a glance, and the traffic police deal with the accident quickly and accurately; It can not only quickly evacuate the scene to restore traffic, but also retain effective evidence at the time of the incident to create a safe and smooth traffic environment.

3. If a tachograph is installed on each car, the driver does not dare to drive in violation of regulations, the accident rate will also drop significantly, and the vehicle that caused the accident will be photographed by the dashcam of other vehicles, and the traffic hit-and-run case will be greatly reduced.

4. When the court hears a road traffic accident case, it will be more accurate and evidence-based in sentencing and compensation, and it will also provide evidence for the insurance company's claim.

5. In the case of professional porcelain bumpers and roadblock robberies, the dash cam will be able to provide decisive evidence to solve the case: the scene of the accident and the appearance characteristics of the criminal.

7. It can be used at home as a DV to shoot the joy of life, or as a home monitor. Parking monitoring can also be done at ordinary times.

8. Since journalists are not prophets, almost all the news of the fall of Russian meteorites is recorded by recorders.