Why does one of Apple s bluetooth headphones stop ringing when I listen to it?

1. The Apple phone is connected to the wrong Bluetooth device. The name of the Bluetooth device will be marked in the manual of the newly purchased Bluetooth device, such as aiben b5, and the Bluetooth device will prompt "Bluetooth connected" after connection.

2. The volume of the Bluetooth device is on mute. Find the Bluetooth headset volume button and adjust the volume.

3. The audio setting is incorrect. Go to Phone Settings, General, Accessibility, Audio Calling Mode, Auto or Bluetooth Headset Mode.

It is the earphones of iPhone 7, which was released at the 2016 Apple Autumn New Product Launch Conference on September 8, 2016, Beijing time. The headphones have a built-in infrared sensor.

It automatically recognizes whether the earbuds are in the ear automatically**, and Siri control can be controlled by double-tapping. Battery life of 5 hours, bring the earphones automatically ****, the microphone effect of the beam is better, double click the earphones to turn on Siri, the charging case supports 24 hours of battery life, the connection is very simple, you only need to turn it on to let the iPhone automatically recognize. It is priced at $159.

Available to order December 13, 2016.

Time Fortune, formerly known as Freelancer China, is a leading crowdsourcing service platform for Freelancer China. It is a trusted freelancer for employers and freelancers, and its service categories cover intellectual property and graphic design.

**Construction, software development, copywriting planning.

There are more than 400 kinds of modern service fields based on decoration design. Time Fortune Network is committed to solving various practical needs for the majority of demanders, and creating a full range of creative services.

Bluetooth connection failure, need to disconnect Bluetooth and reconnect; 3.If the silent earphones run out of power, you can fully charge the earphones; 4.Bluetooth headset motherboard failure, poor contact and other problems, this is a hardware failure, need to be repaired.

Apple's wireless earphones rang one by one and did not ring.

Bluetooth headsets rang one and one did not ring, there may be four reasons, which can be troubled one by one:

Situation 2: Bluetooth connection failure, this is an accidental failure with a very small probability, you only need to disconnect the Bluetooth connection, and then reconnect.

Situation 3: If one wireless earphone is charged and the other is out of power, there will be a situation where one rings and the other does not sound, so you only need to fully charge both Bluetooth earphones.

Situation 4: The wireless headset motherboard is faulty, and there are problems such as poor contact, which is a hardware failure and needs to be repaired at the after-sales center.

When one of the earbuds has no power, it will cause only one side to have sound, and here's how to fix it

Tool: iPhone 8

Operating system: iOS

Device: Apple Bluetooth headset 2nd generation.

1. Because each earphone of the Bluetooth headset is independently powered, the power is low on the side without sound, and you can see that only one earphone is lit up in the picture.

2. First of all, put the Bluetooth earphones into the charging case, and put the charged earphones into it to ensure that the last two earphones have the same power.

3. Then connect the data cable at the bottom of the charging case to start charging.

4. Finally, connect the Bluetooth headset with the mobile phone, and you can see that the power of the headset is very sufficient, and both earphones can hear it at this time.

Hello dear and happy to answer your <>

There are several reasons why the Apple Bluetooth headset rings and the other does not ring: First, the Bluetooth headset has not entered the pairing mode. Workaround:

There will be a function button on the Bluetooth headset, this multi-functional button has a function of matching between the device and the Bluetooth headset, when connecting with the mobile phone, you need to press and hold the function key, and at the same time you need to open the Bluetooth function of the mobile phone to search, click after seeing the corresponding earphone name, and confirm the pairing to connect. Second, the Bluetooth headset has been connected with other mobile phones, and the pairing record has been saved, so it cannot be connected. Workaround:

In this case, you need to forget the previously saved settings and pair again. Due to the different settings of different Bluetooth headsets, you need to refer to the relevant product manuals for specific operations. 3. The Bluetooth version of the mobile phone is not compatible with the Bluetooth version of the earphone.

This is a hardware problem that cannot be solved by itself, so it is recommended to find a headphone seller for return and exchange. Before making a purchase, it is best to refer to the product description and see the Bluetooth technology supported by the phone and Bluetooth headset, or the list of compatible ones. There are other situations, or the Bluetooth function of the mobile phone or headset is damaged, and it cannot transmit and receive Bluetooth signals normally, then it needs to be repaired.

Liquid Crack hopes that this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Happy life, everything goes well [warm] [warm].

Summary. Dear, hello, I will answer your questions immediately, according to your question, I think the same Bluetooth headset is on Apple, one will be disconnected, and one will show that it is connected, proving that your Bluetooth signal is not good.

If the Bluetooth signal is not good, it will appear in the process of connection, there is sound for a while, no sound for a while, this intermittent situation to check whether your mobile phone and Bluetooth distance is out of range.

Why is there no sound when the Apple mobile phone and the Apple Bluetooth headset are connected?

Dear, hello, I will answer your questions immediately, according to your question, I think the same Bluetooth headset is on Apple, one will be disconnected, and one will show that it is connected, proving that your Bluetooth signal is not good. If the Bluetooth signal is not good, the eggplant will appear in the process of connection when the Lingna number, there is a sound for a while, there is no sound for a while, this intermittent situation to check whether your ruler phone and Bluetooth distance is out of range.

Bluetooth headsets are automatically disconnected and connected to talk about clever connections, there are several reasons, which can be detected by filial piety. 1. There is no power. Bluetooth headphones are battery-powered.

If the battery runs out of power, or if the battery is damaged, it will often disconnect automatically. 2. The interference source is too strong. Bluetooth headsets work at frequencies, and there are wifi routers, cordless ** and mice at this frequency.

These are relatively strong sources of interference. 3. The quality of the headphones is not good. Especially refurbished headphones, just bought normal, after a period of use, there will be problems.

I hope I can help you and wish you a happy life, a smooth work, and good health.