The input signal is out of range, and the input signal is out of range all the time

When Windows fails to boot due to setting a large resolution that is not supported by the computer (black screen), you can modify the resolution to solve the problem. Enter safe mode, run, change the data value to 640, 480 or 800, 600 in the resolution key of this key, and then restart the computer.

Change the graphics card driver, and then see if DirectX is the latest version, if not, change to the latest version.

There is a way to do this, and that is to power off the graphics card method.

1. Open the case cover (you can clean the dust by the way).

2. Find a large coin cell battery on the motherboard (it supplies power to the motherboard and other hardware when the power is off) 3. Unplug the battery.

4. Install it back again. 5ok

Open the Adventure Island folder, find the one inside, and set the frequency according to the prompts, and I'll do the same as you, so it's good to set it up.

I'm having the same issue! I'm in a hurry

The resolution key value of this key"What is the meaning? 1!?!

Running the Frequency Settings under the Islands of Adventure folder will resolve this issue.

Changing the resolution can be solved, and it should be lowered as much as possible

Press F8 to enter the safe mode when powered on.

The reason for this phenomenon is that the resolution or refresh rate of the monitor set in the computer system exceeds the maximum value that the monitor can display, and it cannot be displayed, so there is a prompt that the display input signal is out of range.

1. Shut down the computer, restart, press F8, and select Safe Mode.

2. In the safe mode, reset the resolution and refresh rate that the monitor can receive, and the refresh rate can be set to 60 Hz for general LCD monitors. The resolution is changed to: 1024*768.

3. Restart the computer, if it can be displayed normally, you can try to set a higher resolution again, if it can't be displayed, don't move, and the original resolution can be restored after 10 seconds.

Windows 10 system features.

2. Enter the text, and it will quickly retrieve the corresponding application, web page, program, etc. for you to quickly choose.

3. The WIN button on the left pops up a window that allows you to choose your own programs and UMP applications faster, and perform various operations such as power on/off.

4. Click the icon in the lower right corner, so that you can view the system notifications one by one, as well as the messages of mail and other software, and you can quickly set the switch of some functions.

6. The new file management interface allows you to quickly set up some operations and quickly switch to common settings.

Hello dear, glad to answer for you, <>

The reason why the computer displays the input signal out of range is that the refresh rate is set outside the frequency range of the monitor. The solution for the computer to display the input signal out of range is as follows:

1. Click the start button in the lower left corner of the computer screen to enter the settings page. 2. Select the system in the opening settings interface, which contains the settings of the display options. 3. Select Advanced Display Settings in the interface that opens, and further set the refresh rate of the display.

4. In the advanced display settings, select the monitor you are using, and click the corresponding display adapter property settings. 5. Go to the Monitor tab and set the screen refresh rate to 60 Hz. 6. Apply the settings.

Thank you for your consultation, I hope this service can help you, you can click on my brother orange thick avatar to follow me, and then if you have any questions, Fang Wuyan will consult me again. I wish you a happy life, a happy family, good health, and all the best <>

Summary. Hello dear! We've helped you find the results:

The computer displays an input signal that is out of range, usually because the monitor cannot correctly recognize the signal output by the computer, resulting in a failure to display normally. Here are some common causes and solutions that can cause this error:1. Resolution setting error:

If the computer outputs a resolution that is out of the supported range of the monitor, it will result in an error message saying "The input signal is out of range". In this case, you can go into PC Safe Mode and reset the resolution. 2. The refresh frequency is set incorrectly

If the refresh rate of your computer's output is outside of the supported range of your monitor, it will also result in an error message saying "Input signal is out of range". In this case, you can go into PC Safe Mode and reset the refresh rate. 3. Display connection problems:

If the monitor is not properly connected to the computer, it will also result in an error message saying "The input signal is out of range". In this case, you can check if the monitor connection is loose or damaged. 4. Graphics card problem:

If your computer's graphics card drivers are not installed or updated correctly, or if there is a problem with the graphics card itself, it can also result in an "Input signal out of range" error message. In this case, you can try updating or reinstalling the graphics drivers, or replacing the graphics card.

Hello dear! Helped you find the result: The computer displays the input signal out of range, usually because the monitor cannot correctly recognize the output signal of the computer, resulting in the failure to display normally.

Here are some common causes and solutions that may cause this error: 1. The resolution of the server is set incorrectly: If the resolution output by the computer is beyond the support range of the monitor, it will cause the error message "The input signal is out of range".

In this case, you can enter the full mode of the computer and reset the resolution. 2. The refresh rate is set incorrectly: If the refresh rate output of the computer is beyond the support range of the monitor, it will also cause the error prompt of "the input signal is out of range".

In this case, you can go into PC Safe Mode and reset the refresh rate. 3. Display connection problem: If the monitor is not properly connected to the computer, it will also cause the error prompt of "the input signal is out of range".

In this case, you can check if the monitor connection is loose or damaged. 4. Graphics card problems: If the computer's graphics card driver is not installed or updated correctly, or the graphics card itself is known to have a problem, it will also lead to an error message of "the input signal is out of range".

In this case, you can try updating or reinstalling the graphics drivers, or replacing the graphics card.

The computer shows that the input signal is out of range.

Can you speak.

The computer displays an input signal that is out of range, which may be caused by the following reasons: the wrong resolution setting, the wrong refresh rate setting, the monitor connection, and the graphics card.

The solution is to do what I said, just do it, pro.

Hello, glad to answer for you. What should I do if the monitoring shows that the input signal is out of range. Workaround:

You'll need to reinstall the graphics driver, or adjust it back with a supported monitor. Procedure:1:

Press the F8 button when booting into the system, select the safe mode to enter the system, it can be displayed normally, in the device manager of "Computer", uninstall the graphics card, and then restart the computer after the graphics card will be installed automatically, restart the computer again, and the normal display resolution can be restored. 2: You can use another monitor with a higher resolution to connect to the host, if it can be displayed normally, then try to reset the resolution, the resolution of the reset is recommended to be lowered, use lower parameters such as 800 600, connect back to the original display after the setting is completed, it can be displayed normally, and then reset the best resolution according to the original display.

The input signal is out of range because the screen resolution is insufficient, solution:

1. First of all, you need to right-click to select Preferences. As shown in the figure below:

2. Next, you need to select the screen resolution in the options. Click to enter. As shown in the figure below:

3. Enter the monitor tab, and set the screen refresh rate to 60 Hz, after the setting is completed, click "Apply". As shown in the figure below:

This is because the resolution and refresh rate set exceed the physical metrics of the display.

1. First of all, you need to right-click the "Menu" column with the mouse, find and click the "Device Manager" button in the pop-up page box

2. Then you need to find and click the button option named "Display Adapter" in the next pop-up page box

3. Finally, you only need to right-click in the drop-down menu and click "Restart the computer after uninstalling" to solve the problem that the input signal is displayed outside the display range after the win7 screen starts:

When the resolution of the VGA signal output by the graphics card is too large or too small, the refresh rate is too high or too low, it will cause the display to be unable to parse this signal, so that the display will prompt the input signal to be out of range.

The solution only needs to change to a high-resolution monitor and adjust the resolution back to 1360*768.