The laptop is connected wirelessly but cannot open the web page

First of all, recall whether the router has been changed by anyone or what? Let's see if the IP address obtained by the laptop is correct? Or whether the IP address of the notebook has been changed to an IP that does not match the wireless router.

It is possible that you are cleaning the system that corrupts the network access to the relevant files (e.g., you can try to remove the network card and re-drive it.

You see whether you are connected to the AP or other notebooks' wireless network card, the AP is the transmission point, generally wireless routing and the like.

If you're connected to another laptop, of course you won't be able to access the Internet.

The sign of the AP is a pole, and then there is a waveform that spreads to both sides, and if you are connected to the wireless router, you need to check whether the broadband connection is normal, you can ping the wireless router first, and then check whether the wireless router has been connected to the Internet

If you don't, you won't be able to get on.

Maybe there is an error in DNS, set the IP and DNS to the default, if it comes out of the switch, set the DNS to the resolution server IP for the city

Cause: First, check whether your unlimited route has been successfully connected to the Internet.

To check the settings of the Unlimited Router, you can look at the Unlimited Routing DHCP settings and choose to automatically assign IPs to backlink devices.

Solution and steps:

1.When the web page cannot be opened, first ** a 360 guard, then open the 360 security guard, and click the "manual service" item on the main interface of the 360 security guard.

<>4.Follow the steps above to open the window and select "Fix Now", and 360 Guard will perform a comprehensive repair of the current network environment.

5.If it still can't be solved, don't worry, we can choose the "360 System First Aid Kit" to fix it. As shown in the figure, click on the icon framed in ** to enter.

6.In the interface that opens, select "Full Scan" and then select "Start First Aid". This is shown in the figure below.

7.Finally, wait patiently for the repair operation to complete.

Hello, you can't open the web page can be solved in the following aspects:

1. Please restart the computer, because it may be caused by abnormal Wi-Fi disconnection.

2. Look at the router (home wireless), check whether the network cable interface of the router is loose, whether the connection with the cat is tight, and check whether there are microwave ovens and other household appliances near the router.

3. Restart the router, how can you solve the exclamation point caused by this problem because DHCP is automatically assigned, and restarting the router can solve the exclamation point caused by this problem. Go in, go to Advanced Settings, and click Restart Router.

4. Check the number of hosts of the router, some routers will no longer provide network services if three or four devices are connected by default, if the number of hosts is too large, it will cause the computer to be unable to access the Internet.

5. Ignore this network signal to reconnect, it is best to ignore the network first, then turn off the router, and let the computer search for the wireless network again after reopening, which is more conducive to the connection and use of the wireless network. The way to ignore it is to open the network share, select the wireless network, and right-click to delete it.

6. Update the NIC driver, there may be a problem caused by the old or conflicting wireless NIC driver, directly open the driver wizard and update the NIC driver.

8. If the problem has not been solved, please call the company of your own network (China Telecom Mobile Unicom Tietong) to ask, if the company says that the network is normal, then please consider hardware repair or change a router.

Questions. The wireless network can be used normally, and the computer can also log in to QQ, but the web page cannot be opened, and the Ali store cannot be logged in with a 360 test, showing that the network connection configuration is abnormal, and it is <>

Hello, according to your description, please call the company of your own network (China Telecom Mobile Unicom Tietong) to ask, if the company says that the network is normal, then please consider hardware repair or change a router.

Questions. <>

<> I can't change these modes.

It is recommended that you call the company of your own network (China Telecom Mobile Unicom Tietong) to ask, if the company says that the network is normal, then please consider hardware repair or change a router.

Questions. Uh-huh, thanks. You're welcome

What should I do if the computer can access the Internet but the web page cannot be opened?

In life, many friends will encounter a computer that can be connected to a wireless router through a wireless network card, showing that the wireless network is connected, and the signal is full, but it just can't get on the network and can't open the web page. These reasons are varied, such as the wrong password of the broadband account and the failure of the router's PPPOE dial-up, the failure to obtain the IP address of the WAN port, and the wrong jumper mode from the modem to the router.

Method Steps:

1. First power on the wireless router, when the router is working normally, find the SSID number corresponding to your router model through the network connection icon in the lower right corner of the computer, and click to connect. If you have set a login password for the wireless router, you must enter the correct password to connect to the router.

2. Open IE or other browsers, enter the LAN port IP address of the router in the address bar, the LAN port IP address is generally written on the label behind the router, or you can also press the "Windows key + R key" at the same time to open the "Run" dialog box and enter "cmd".", press Enter to open the command prompt dialog box, enter ipconfig, and view the gateway address, which is the IP address of the LAN port of the router.

3. Press Enter, pop up the router login dialog box, enter the login username and password of the router, the username and password can be obtained by checking the label behind the router, press the enter key, and log in to the router interface.

4. Check the WAN port IP of the router through the "Operation Status" column of the router, if the WAN port is not connected, it means that the WAN port of the router is not connected to the LAN port of the cat, that is to say, the port of the router is plugged in wrong, and the network cable of the LAN port on the cat should be connected to the WAN port of the router.

5. If the network cable is correctly connected to the port of the modem and the router, and the following situation appears in the "Running Status" information, it means that the router has not selected the correct way to obtain the public IP address.

6. Select PPPoE dial-up, automatically connect (general home users use PPPoe dial-up to automatically obtain the public IP address), enter the correct broadband account and password, and save.

Precautions: 1. First of all, it is necessary to make sure that the DSL lamp and PON light of the cat are always on, so as to indicate that the external network is basically normal.

2. Make sure that the network card light of the cat and the WAN port light of the router are flashing, so that there is no problem with the device and the network cable.

3. If any of the above problems occur, it will lead to the inability to access the Internet.

Wi-Fi connection is not necessarily able to access the Internet, as long as the router has a wireless signal, it can be connected to the mountain. The main thing is the setup of the wireless router, re-set the router.

Check whether the wireless settings of the notebook are inconsistent with the protocol encryption method and password of the wireless router.

Routing to routing is useless, you unplug the existing line, use the wireless routing belt, and the wireless routing also has four wired interfaces.

You can replace the original wired route with a wireless router.

If you are sure that the router configuration is fine, it is recommended that you check to see if it is a problem with your computer.

1. The NIC is not driven?

You take a look at the wired one.

2. Port problem, I once encountered the problem that I can get on QQ but can't open the web page. This is just changed in the internet options.