The CPU fan shook when it started, but it didn t spin, and it solved the problem of adding 50 points

Replace it directly, the fan is not expensive, the new one in the computer city is generally about ten yuan, and if the old relationship is familiar, it will be sent to you It is not worth the money, and it is almost free to find the boss in the computer city, and the big deal is to give him two dollars. Hehe, that's how I got my hands, the price of two cigarettes!!

Supplement: Send it for repair, save the trouble, it's a big deal to change a fan, it's not expensive.

It must be the wire inside that blocks the rotation of the fan, don't believe me. I used to be. The shaking is because there is no lubricating oil in the place where the fan buckles the CPU, and it should be sold in the computer city.

That can be washed with water.

Peel off the plastic paper on the fan, add some lubricating oil, and dip it on.

It's okay to put some cooking oil on it without lubricating oil, and it would be nice to put some peanut oil on my fan very slowly last time.

It's broken, this report is broken! Mine used to be like this, but I just cleaned the dust, and it didn't wash with water, and it broke down, and then I couldn't do it after a lot of demolition! It should be no problem to change one!

You can't flush it with water, if there is no wire to block it, take off the plastic paper sealed on the fan and put some lubricating oil on it and then dip it (gun oil is the best).

Just change the fan, it will be solved for more than ten yuan, it is very simple, worry-free!

Your fan design is more sophisticated, did you install it and power it up when it wasn't drying? Yes, you've burned the fan's circuitry

Mine is the same as yours, for some reason, as soon as the temperature is high, the CPU will automatically power off! Finally bought a new fan! The fan is broken and can't be repaired.

The main thing is that the coil inside is not dried It is recommended to dry it with an electric fan.

Summary. Kiss is happy to answer for you: In some computer systems, the CPU fan usually keeps turning after turning it on, even when there is no actual load operation.

This is because modern CPU processors usually automatically adjust the heat and fan speed of the processor to maintain the temperature of the processor within the normal usage range. <>

<> CPU fan keeps spinning, is it normal, as long as it is turned on, the fan keeps spinning.

Qinqin is happy to answer for you: in some computer systems, the CPU fan usually keeps turning after Kailing returns, even if there is no actual nuclear load operation. This is because modern CPU processors usually automatically adjust the heat and fan speed of the processor to maintain the temperature of the processor within the normal range of use.

<> the extension to you is that if the CPU fan keeps spinning after turning it on, then this is normal. Processors often need to maintain low operating temperatures to ensure system stability and long-term performance.

Therefore, the continuous rotation of the fan can help reduce the temperature of the CPU while keeping the processor running properly. <>

The heart shouts and lifts].

1. If there is a problem with the power supply or the motherboard settings, first put the motherboard battery down for a few minutes and then put it back to try.

2. If you suspect that there is a problem with the power supply, unplug the original power supply and plug it in again, boot the test to see if the fault has been solved. I just solved the problem that the computer can't turn on and the CPU fan turns and stops through the second method.

3. We can also check the memory module, the way to rent Lu detection is to unplug the wire to test the boot status, if it can be booted and changed to chaos, it will not restart, then it is a memory problem, if not, it is not a memory problem.

4. System problems, it is likely to be due to a failure in some aspect of the system, it is recommended that you reinstall the system.

5. How to deal with the noise of the CPU fan:

1) Under normal circumstances, the center of gravity of the fan blades is on the axis, which is very stable and has little noise. If the quality of the fan is not good, the center of gravity of the fan blade does not cause "eccentricity" on the shaft, and after the fan rotates, the fan bearing gradually wears out, which makes the vibration aggravated and the noise becomes louder. If you're a gamer, the impact is even greater.

If the speed of the hard disk is low and the memory is small, then when processing a large amount of game data, the CPU will inevitably increase the working pressure of the CPU.

Solution: It is recommended to replace a high-quality fan.

2) CPU fan bearing lacks oil.

The fan of the sliding bearing has been used for a long time, and the lubricating oil inside has dried up.

Solution: Add some lubricating oil to the fan. This brings us to the question of how to remove the fan and how to drip the lubricating oil.

The fan does not rotate because the dust has stuck the fan for too long, or the fan has burned off. It is normal to have a crash, and if you can't dissipate heat, the CPU temperature overload protection will be activated. Turn it off by yourself.

It is recommended to replace the fan immediately. Do not force frequent boots, which will cause damage to other hardware.

Bottom line: change to a new one, the heat dissipation is good, and it's normal.

The CPU fan is too dirty, remove it and clean up some, and then add some sewing oil to the bearing, if it is not for this reason, change the fan socket of the motherboard to try it, if it does not turn, it should be that the fan is broken, change it, if the current computer does not rotate, it will basically crash, and it is fortunate not to burn the CPU, unless you are running one, you can also run naked for a while.

The CPU fan does not rotate, and as a result, the CPU temperature is too high and causes a crash. The CPU fan is broken, just change it.