How about a full touch screen phone, is the touch screen easy to break?

It is not easy to break when used normally, unless you poke it with a sharp one, or use the mobile phone as a brick to smash people. Typing is pretty fast, don't listen to 9l's nonsense.

That's right! It is highly recommended that people like LZ never use the touch screen.

No, you must not be used to buying a mobile phone with a touch screen at first, and you can take it slowly, but you must protect the screen of your phone.

It's not easy, the touch screen has to be protected, but most of the quality is very good, but it doesn't take easy to use.

Paste the film, and then buy a mobile phone case, the kind that can protect the screen, the best screen is still hard, it's easy to find it, about 20 or 30 yuan. Also, when you put it in your pocket, you should make the side of the screen face the thigh, so that it can also effectively protect the screen. Virtual keyboard is doing a lot of real work now· For example, vibration feedback, etc. And the trend of mobile phones in the future will definitely be full touch screen· As for turning the page up and down, it is to pull the slider bar on the side Not bad· Usually the situation is convenient I now use the Samsung i900 with a full touch screen, I have been using it for more than a month, and I was worried about it before I bought it, but now I feel much better, the full touch screen is still very convenient to use, and the keys are silent, and again, my i900 full touch screen keyboard can be 26 full keys, or it can become a traditional 9 keys, It's very convenient.

However, some games do not support full touch screen, but there are still many games that can be played, and many games that can only be played on full touch screen, hehe......Also, for example, it is very troublesome to use it when you are in the car. It's easy to press the wrong ......Handwriting is not bad,......As for the screen life of the full touch screen, it depends on what material the mobile phone screen is made of, and the induction method used, such as resistance induction, or capacitive induction, or pressure sensitivity, etc., and the pen of the mobile phone is not directly on the screen, the LCD screen does not have the function of touch screen, but the material and corresponding circuit mentioned above are added to the LCD. There are some touch screens that can replace the top layer of material, which means that the touch screen can be used for a long time, know the life of your LCD screen, for example, the screen of a copycat mobile phone will become darker and blurr and blurry in a short period of time, which is caused by the use of cheap liquid crystal ......All in all, I think the full touch screen is pretty good!

Not good: The full touch screen is easy to break. Also typing is slow.

Comparatively speaking, it is better than the slider and flip cover, and the cable of the slide and flip cover is the most likely to break.

Remember not to get into the water, it will go bad when it comes into contact with water.

Look what brand it is, the copycat that my mother bought broke after just a year of use.

Don't get into the water! If you don't squeeze it, it won't break!

1. There are three main types of faults for mobile phone touch screen failure.

Mobile phone touch screen failure fault 1: hardware damage.

Nowadays, the screen of mobile phones is getting bigger and bigger, and it occupies almost the entire mobile phone, because once it is in close contact with the ground or other hard objects, it may cause regretful consequences! However, sometimes, after a fall, there is no superficial damage, but you find that you can't touch it, what should you do? (I won't say anything about the fragmentation here, so please seek medical attention as soon as possible.)

Physical damage.

1. The touch screen and buttons of the mobile phone are all out of order (sometimes suddenly normal and all out of order) [it may be that some of the original parts of the touch screen are loose or damaged, and they need to be sent to the hospital for reinforcement and welding, or the screen or components need to be replaced].

2. The touch screen of the mobile phone is out of order, and the buttons are normal [the touch screen is loose and damaged, and it needs to be sent to the hospital for repair or replacement] (there are also normal software and CPU failures, but they are rare).

3. The touch screen of the mobile phone is biased, which can be corrected, but after correction, it is still biased [deliberately biased to change the touch screen when restoring the factory or grid code piece (last 1m) calibration].

4. The correction screen will be displayed when the mobile phone is turned on, which can be calibrated, but it cannot be completed to make the calibration [need to replace the touch screen grid chip].

5. If the mobile phone fails to touch and disassemble, it is normal, and the installation is out of order [the four sides of the touch screen are too tight, remove the sealing strip, and the root of the touch screen lead is disconnected and virtually connected].

Other hardware damage or impact.

1. Personal habits: Playing games or operating often will cause problems such as screen heating, and the screen may be burned out! Only the screen can be replaced

2. Battery failure, which can be solved when using a charger or data cable.

3. Influence of magnetic field, [stay away from magnetic field or degaussing treatment].

4. Affected by static electricity, sweat and oil, the human body may have static electricity, sweat and oil stains under specific circumstances, and should be actively cleaned and protected.

5. The influence of high temperature and low temperature, the ambient temperature has a great impact on the touch screen or the overall machine [above 40 degrees Celsius is very easy to cause problems, please do not use it].

1. Confirm the ambient temperature.

If the ambient temperature of the mobile phone is too low, it may affect the touch screen effect, it is recommended to keep the mobile phone at 0 35 ambient temperature.

2. Mistakenly turn on the talkback mode in barrier-free.

If you enable the talkback mode, the touch mode will change, and a green frame will be displayed on the screen when touched. You can press and hold the volume up button + down button for 3 seconds at the same time to exit the talkback mode, or double click Settings - double click More Settings - Swipe to Accessibility with two fingers - Double click Accessibility - Double click to close Talkback.

3. One-click acceleration to clear background programs.

If there are too many background programs, or there are abnormal programs in the background that may affect the touch screen effect, it is recommended that you speed up or clean up background programs with one click before trying again.

Note: Please check if it is installed"One-click lock screen"class applications, some third-party"One-click lock screen"The software will conflict with the lock screen that comes with the system, resulting in random jumps, such as jumping to the lock screen, etc., it is recommended to uninstall the third party"One-click lock screen"and other types of software.

4. Whether there is liquid or stain on the finger or screen.

Liquid or stains on your fingers or screen will affect the sensitivity of the touchscreen, so it is recommended to clean it with a clean, dry cloth before trying again.

5. Check the film.

If you use a non-original film, it may affect the touch screen effect, so we recommend that you remove the film or go to the customer service center to reapply the film.

6. Replace the standard charger or data cable.

If you use a non-standard charger, it may affect the phone's touch screen function when charging, so it is recommended to use the standard charger and data cable for charging.

7. Restart your phone.

Please restart your phone or force restart your phone to see if it returns to normal.

Force restart method: Long press"Power button"More than 12 seconds.

8. Upgrade the system version.

The new version improves compatibility and stability, and can be viewed by upgrading the system.

9. Check whether it is a single software or all software in a fixed area The touch screen is not sensitive.

A single software is not sensitive to touch in this area: it is generally a reason for software incompatibility, it is recommended to go to the app store to upgrade the software, and at the same time feedback to the software customer service.

Enter the vivo official website vivo**app--my-service outlets or vivo official website web version--scroll bottom--service support--service outlets inquiry--select provinces and cities to query the address of the customer service center. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

The phone screen is not broken, and the full-screen touch fails.

Dear, I'm glad to answer for you: the phone screen is not broken, the full-screen touch is out of orderA: Dear, The reason why the phone screen is not broken but doesn't slide is usually the following:

1. The mobile phone is used for too long, the background running system and the mobile phone are more garbage, the whole system responds seriously and slowly, and the system response is not timely in the case of screen operation, resulting in jamming failure. 2. There are a small amount of water stains or impurities on the mobile phone screen or mobile phone, which affects the screen recognition process and causes the screen to fail and do not move. 3. After the mobile phone was accidentally dropped to the ground and collided with an external force, the touch screen or internal display cable of the mobile phone was disconnected (poor contact), resulting in the screen being unable to touch and failing.

Extended information: Precautions for mobile phone screen maintenance: 1. Afraid of "high" temperature:

The "high" temperature here is not to bake with fire, but to reach a temperature of about 40 degrees, which may cause the capacitive screen to drift, and if it is at this temperature for a long time, the capacitive screen will be braided, do not sunbathe, and do not use it for a long time in the hot sun. 2. Extreme fear of static electricity: it is easy to break through the capacitive screen.

Although the layer of glass on the surface of the capacitive screen mobile phone has undergone a certain antistatic treatment, it does not mean that it can withstand the static electricity of the human body, and many people like to paste an inferior screen sticker on the surface of the mobile phone that is easy to produce static electricity. 3. Fear of conductive media such as oil stains and sweat: covering the screen will form a conductive layer, which will cause the screen to drift, wash it by hand, dry it and use it again.

4. Fear of unstable voltage: Generally, when the finger touches the capacitive screen, it will "suck" a little current, and then the screen will evenly transmit power from the four corners to the position where the thumb is located, and use this to do positioning, so the capacitive screen will "drift" or even fail when the transmission voltage is unstable In addition, if the power is less than 20%, it is best to charge it immediately. 5. Fear of magnetic fields:

Especially the electromagnetic field, the small magnet on the capacitive screen for a while, the capacitive screen will temporarily fail (may also cause permanent damage) Don't get close to the speaker or magnetic screwdrivers and other items, don't put the handy phone on the speaker when you get home. Thank you for your patience. The above is my full reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy!

If you are using a Huawei phone and the touch screen is out of order, you can troubleshoot it by following the following steps:

1.If the ambient temperature of your phone is too low, the touch screen may malfunction, which is affected by the physical characteristics of the screen device itself, and it is recommended that you try to keep your phone at an ambient temperature of 0 -35.

2.If the problem persists, we recommend that you bring your phone to a Huawei Customer Service Center with your proof of purchase.

If you haven't backed up your data before, you're at risk of data loss when you detect it.

The phone's touch screen failure is caused by software conflicts or incompatibilities, and the response is slow, so it is possible to recover by pressing the lock screen button back and forth a few times.

Go to the place where the mobile phone is repaired, let them use the air gun to dry the water on the motherboard inside, and then see if it is good to touch, if it is not easy to use, just replace it with one, 15 yuan.

If your phone has a partial failure of the touch screen, you can troubleshoot it by following the following methods:

1.If the ambient temperature of your mobile phone is too low, there may be a problem of local failure of the touch screen, which is affected by the physical characteristics of the screen device itself, it is recommended that you try to keep the mobile phone at an ambient temperature of 0 -35.

2.If the screen has a film, it may be due to the protective film being too thick, which affects the touch sensitivity of the screen. We recommend that you replace a thinner third-party protective film or go to a Huawei Customer Service Center to replace an official protective film.

3.If your phone's screen is dirty or has water stains, it may affect the screen touch sensitivity. It is recommended that you try it after wiping your screen clean.

4.If your mobile phone is suddenly unresponsive during normal use, please press the power button and volume up button at the same time to start the screen recording function, and then click the mobile phone operation, if there is a white circle on the screen finger click sliding position, it means that the mobile phone touch screen is working normally;

If the screen recording function is not enabled, please press and hold the "Power Button" for more than 10 seconds to force the phone to restart, and the failure does not recur, then the problem is not touchscreen.

Make an appointment for service. Boarding service.

Repair spare parts** inquiry.

The screen of the current touch screen mobile phone is divided into two parts in terms of physical structure, one is responsible for the LCD screen of the screen display, and the other is the touch control module responsible for feedback of touch information. Judging from your situation, there should be nothing wrong with the LCD screen itself, but the touch module may be faulty. Again, there are two possible faults, one of which is a hardware issue with the touch module itself.

In addition, there were occasional drifts and failures in mobile phones in the past, and the latter chose to flash the machine to replace a higher version of the Android system, and the problem was also solved, the author's analysis found that most of the original mobile phone system installed more applications, coupled with the low configuration of the mobile phone, it is easy to lead to insufficient mobile phone resources, so this phenomenon may also occur, you can suggest trying to restore factory settings or try after flashing, not yet, and then take it to overhaul better.

1. The touch screen and buttons of the mobile phone are all out of order (some are normal when they are turned on, and they will all fail): soldering or replacing the touch IC, soldering or replacing the CPU, writing software (the keys are out of order, and the normal touch is generally stuck by a button) 2. The touch screen of the mobile phone is out of order, and the keys are normal: change the touch screen.

Soldering or changing touch ICs, planting CPUs (processors), checking for broken wires or short circuits. (Normally, there are also bad parts and CPUs with soft world, but they are rare) 3. The touch screen of the mobile phone is biased, which can be corrected, but it is still biased after calibration: deliberately biased when restoring the factory or grid chip (the last 1m) calibration, changing the touch screen.

4. The mobile phone will be corrected when it is turned on, which can be corrected, but it cannot be completed, and it has been calibrated: change the touch screen grid code, write the whole font, plant the CPU, solder or change the touch IC, check whether the touch IC is open around the assembly components, scratch the cover, and change the cable with the clamshell machine. 5. If the touch of the mobile phone fails, the disassembly is normal, and the installation fails

The four sides of the touch screen are too tight, remove the seal, the root of the touch screen lead is broken and connected, and the related components of the main rock slab are soldered.