What are the different effects of irons and woods?

There is a clear difference in appearance between irons and woods, subjectively that woods are longer than irons and the clubhead is larger than irons.

Irons are generally used in the fairway and tee off in short game holes, the general number is more than 10, because there are many short irons, the distance of the irons is relatively short, and the general profession also has a number of irons, the distance can be 250, but the average person can't play, it is difficult to control.

There are also different numbers of woods, the number is not the same, the angle of the face is not the same, the smaller the angle, the farther it is hit, of course, it is more difficult to play, it is generally divided into different woods, but there are only in the general bag. Ladies are more of the kind of wood with a large number, No. 1 wood is used in the tee, playing a good distance of more than 300 yards, of course, the number can also be used in the tee, the distance is not as good as No. 1, sometimes it is a strategic need, and the number is the pole needed on the fairway after the 5-hole tee, of course, the professional use of irons, the distance between the number of woods ranges from 200-280.

If you have a set of irons and woods with the original design, that is the best, so that the soft and hard, length and function of the pole are uniform, and you don't have to be distracted to adjust our playing style and posture when using it.

Irons are mainly good for gripping the strength between the shoulders and arms, and are also smoother and less frictional with the ball.

Irons are generally easier to play than woods.

Woods will hit farther distances than irons.

The irons are relatively stable.

Actually, it's a good wooden pole.

There is a feel, and it is generally an iron rod.

Hardcore control power.

The wooden pole controls the distance.

The difference between woods and irons is that they are not used on different courts, and their main differences are in the material, as well as the trajectory of the ball after hitting the ball.

Golf clubs, actually.

The types can be divided into four categories: woods, irons, special sand wedges and putts. Among them, the wooden poles are divided into:

No. 1, No. 3, No. 5, there are also par 4 and par 7, all of which are chosen according to their needs. Irons: Also called hybrids, they are mainly between woods and irons.

For beginners, iron bars are more difficult to hit and often can't hit far, while hybrid bars are relatively easy to hit. Iron rods have a maximum of 9 rods, and some have 10 and 11 rods, which are equivalent to splitting rods P and AAnd the sand wedge:

Generally, there are bunker poles, others have 60 degrees, 64 degrees, etc. Equipped according to individual needs. Then there is the putt.

The putter is mainly the difference between the club head and is divided into strip and semi-turtle shell. Finally, there is the chip: refers to the green.

The edge hits the ball with a low degree of flight.

The main difference between these clubs is that you can look at the shape of the club, or the size of the club, or the length of the club. The uses of cues can be broadly divided into:

Tee shot (wood), fairway, precision control (iron), high toss to the green (sand wedge, a, s), hit the ball into the hole, etc. The hardness of the club can be divided into six grades: L, A, R, SR, S, and X, and the golf club is the basic equipment in the game of golf, which is composed of the ball head, shaft and grip.

Clubs are also divided into many materials, one of which is 1Carbon material: Mainly used to make carbon shafts. Graphite is usually filled with ceramic components, or carbon and glass fibers are added.

Make it lighter and stronger. 2.Titanium alloy.

It is generally used in the manufacture of drive heads. The density of titanium is very small, about 60% of iron. But it has the characteristics of high strength, easy high-temperature heat treatment, weldability, and forging.

Titanium alloys refer to pure titanium that is joined with other metals to improve its properties. 3.Tungsten:

Tungsten is quite dense, about twice that of titanium, and is mostly used for clubhead counterweights. 4.Mild steel.

Soft iron. When casting iron rods, 2 4% carbon is added to stainless steel to harden it.

The main difference between them is in the material of the club, and the trajectory of the ball after hitting the ball. The difference between a long iron and a wooden pole after hitting the ball is that the long iron only digs back a thin layer of turf, while the wooden shaft only has a little scratched grass mark (not obvious). The wooden club is generally a sweep, and the impact of the ball is relatively large, and because the angle of the club face is steeper than that of the iron, the backspin generated by the hit is less, so the ball is not easy to stop the ball, and there is more rolling; Irons, on the other hand, use the face to squeeze the ball to the ground, which produces more spin.

The difference between golf club woods and irons is that they are not used in different fields, and their main differences are in the material, as well as the trajectory of the ball after hitting the ball.

1. Wooden poles. Mainly used for tee shots. PGM's wooden poles are semicolonized by length. The woods are characterized by a long shaft and a lighter club head for easy swinging. The smaller the number, the longer the shaft length and the lighter the weight; Conversely, the larger the number, the shorter the shaft length and the heavier the weight.

Second, irons. Irons are mostly used on the fairway or tee off on par threes, and they are all about consistency rather than distance. The irons included in the PGM sleeve are: 5 9 irons, P-rod, S-bar.

Woods are generally short, making them suitable for short distances. The irons are relatively long and suitable for long-distance play. The two are not the same use.

The three words <>pole", "rod", and "stalk" all refer to something that is slender and straight, but there are differences in usage. "Straw" is next to the word "He". He is a herbaceous plant with knotted and hollow stems, and the leaves are interspersed and smiling, long and narrow.

These plants are generally soft in texture and have the characteristic of shaking with the wind. "Pole" is next to the word "wood". Wood is a tree or wood, wooden, and is not easily deformed.

The "秆" is pronounced gǎn and refers to the stems of certain plants (crops, etc.), which can be used as words: rice stalks, wheat stalks, hemp stalks, sorghum stalks, reed stalks.

"Pole" is a polyphonic and polysemantic word.

1.Pronounced gǎn (1) refers to the slender part of the object (including the hollow one) that resembles a stick: a pencil shaft, a weighing rod, and a cigarette pouch pole. (2) Measure words, used for round pacemakers with rods: a scale, a gun.

2.The pronunciation of gān refers to a slender piece of wood or something similar (mostly standing upright on the ground with a thinner upper end) for a certain purpose: a telephone pole, a flagpole, a railing.

The character for "pole" has the prefix for "bamboo", and in addition to referring to "bamboo pole", the things referred to were often made of bamboo in China.

For example, "fishing rods", sliding rods (old-fashioned manual vehicles with a reclining chair seat set up between two bamboo poles and carried by two people), horse rods (sticks used by blind people to explore their paths).

Stalks: "Stalks" refer to the stems of plants such as wheat, rice, and corn.

For example, "straw" is used in "wheat stalks", "rice stalks", "corn stalks", "sorghum stalks", "eggplant stalks", and "sunflower stalks". Don't mistake the word "stalk" for "rod" in such words.

The iron is characterized by high trajectory, and the ball has a strong backspin, which will stop immediately after landing, and can accurately control the landing point to start the bench, so after using the wooden stick close to the hole, it is necessary to accurately hit the ball around the hole, and the iron is easier to control the precise landing point of the ball, and stop when landing. In order to achieve this effect, the number of irons commonly used is relatively large, because the shaft is short and easy to control. Novice practice also often starts with a 7-iron, and slowly moves up to a 6-iron, a 5-iron, and then a wood.

The earliest wood, the clubhead is a solid ball head made of persimmon wood, hence the name of the wood, modern wood, are titanium alloy hollow clubheads, which can achieve a larger clubhead volume and better forgiveness. The biggest feature of the wooden club is that it has high forgiveness (so even the length of the No. 1 shaft can be played quietly by ordinary people), the ball ballistic trajectory is low, and it rolls a lot after landing, so it is used to play distance, usually used in the first 1-2 hits from the teeer, in order to minimize the distance between the holes, so the number of wooden clubs is relatively small, and the shaft is carbon.

When using a wooden stick to tee, due to the requirements of the wooden club, it is necessary to raise the ball, and the small bracket that holds the ball is called the ball tee, so the tee place is also called the chain old tee table.

As the number of fairway lumbers and irons increases, the loft of the ball head surface gradually increases. Typically, the stake increases by 4 degrees per magnified figure. For example, the loft of a 5-iron is 28 degrees, and the loft of a 6-iron is 32 degrees.

In addition, as the number increases, the shaft becomes shorter, resulting in a different shot effect for each club. The higher the number, the higher the trajectory of the ball and the shorter the distance.

In addition to the differences in the clubs themselves, players will also use their batting skills to hit the same club with different shots. For example, different swing amplitudes of the same shot can adjust the distance of the shot, while the adjustment of the stance can affect the left and right trajectories, etc. In particular, the so-called short (under 50 yards) shot is full of imagination and challenges.

The combinations are constantly changing, and that's the beauty of golf. Only when you master the various skills on the driving pitch and adapt to the situation on the field will you know which pole is the most suitable!

The hitting distance is the same as that of a wood, but there are great differences between men and women due to factors such as gender, age, personal strength, and hitting style. The figures presented in Table 2 are for reference only and are based on the average number of men who sell the average number of men. The 3-iron and 9-iron are mainly used to hit the ball on the green depending on the distance; Hit the ball with a short iron when hitting an obstacle within 100 yards; Irons are suitable for mid-distance shots on turf or rough terrain, while long irons have the same long-distance striking characteristics as woods and can be used for long shot shots or tees.

The irons are divided into short and medium games. Long iron usually refers to No. 3, No. 4, No. 5, No. 6 and No. 7 are medium railways, and No. 8, No. 9 and No. 10 are short iron. There are fewer and fewer people who use long irons, and most of them are replaced by small drumsticks.

Long irons are usually not easy to hit high and are prone to producing the right curves. Due to the small angle, the long irons are handy when encountering strong headwinds. The design of the iron eucalyptus ball head is different from the knife-back and concave back type.

The center of gravity of the knife back type is high, and it is not easy to feel the club head loose; The cavity back has a low center of gravity, and some even have an ultra-low center of gravity. The bottom is heavier and the dessert area is larger, so it's easier to hit the ball and can also be hit higher.

So it's better to mix iron and wood together. The reason for the exclusion is that face is a large percentage. Some players feel like they can control the long iron very well.

If they are strong enough, they have nothing to say.

The wooden pole is called a wooden pole because its head was mainly made of wood in the past. It was originally made from red persimmons. Because the wood will swell when exposed to water, the bat will be sent to a professional shop for repair after being used in rainy days; Later, it evolved to be made of different materials.

Iron, stainless steel, carbon fiber, and titanium are used.

Because the way of hitting the ball is different, the intensity of the slap is different, so the quality of the golf club will be distinguished. Woods can be used if the hole is not particularly far away. Tell Chang.

Because different clubs will have the same effect trajectory that is not sold or not, and there will be great differences. It is usually used at tee time. In the case of individual towns, it will be adjusted according to its own situation.

This is because the material made of golf clubs is different, and then the weight is not the same as a big round of friends, and the feel is also different. Generally amateur people will be suitable for using wooden poles.

You mentioned a very common phenomenon, and probably many people have the same experience as you. The swing method for irons and woods is basically the same, but there are a few caveats:

1) The longer the shaft, the lower and flatter the swing plane, and both the long irons and woods are "swept" plays, with the clubhead skimming the ground. Short and mid-iron irons are swinged upright and the clubhead touches the ball first and then the ground, often playing a piece of turf. Generally speaking, it takes a long time to practice and get used to the different angles of the swing plane.

2) When playing long distance balls, you need to complete a full swing; Medium and short irons don't necessarily require a full swing. Here, the sending and receiving parts have a greater impact on the hitting quality of the long iron and wood.

3) It is recommended to practice irons for 2 3 time, and no more than 1 3 time for woods.

After playing for a period of time, after the level of woods and irons has improved to a certain extent, this problem will naturally disappear.

That's a good question, I like the difference between a long iron and a wooden stick after hitting the ball, the long iron just digs back a thin turf, while the wooden stick just has a little scratched grass mark (not obvious). The wooden club is generally a sweep, and the impact of the ball is relatively large, and because the angle of the club face is steeper than that of the iron, the backspin generated by the hit is less, so the ball is not easy to stop the ball, and there is more rolling; The iron is to use the face to squeeze the ball to the ground, so that there is more backspin, and it is easier to stop the ball on the fruit collar than the wooden club.

Hehe, I don't know if what I said will work for you!

Wooden poles: In the past, of course, "wooden poles" were made of wood (hence the name), but now they are made of a variety of different materials. Generally speaking, woods are slightly larger than other clubs.

Woods are typical long distance clubs, which means that distance is more important than accuracy. The drivers are usually'1'Drivers, the angle of the club face is roughly between 8 and 12 degrees (0 degrees of the face angle is perpendicular to the ground).

Irons: Irons were originally made of iron, but now they are mostly made of steel. Irons are smaller than woods and are often seen as delicate clubs, which are used with more precision than distance.

The difference in the style of play lies in the swing plane, etc.